Mixed C18 and C1 modification on an optical fiber for chromatographic sensing

An optical fiber-chromatographic sensor, aiming at simultaneous and selective response to multiple components following a chromatographic separation, is described. We report an improved approach for immobilization of octadecyl (C(18)) and methyl (C(1)) moieties as stationary phase on an optical fiber suitable as a sensing phase for organic solutes. By this approach, the stability and lifetime of the sensing layer as well as the detectability and retention behavior of the chromatographic sensor could be improved. Infrared spectroscopy was employed to confirm the presence of C(18) and C(1) moieties on the modified surface of the optical fiber. The chromatographic sensor was applied, with good sensitivity and chemical selectivity, to the simultaneous separation and detection of bromobenzene and toluene, using water as the mobile phase.     

Synthesis and characterization of perfluorohexylated poly(3,4-ethylenedioxythiophene)

The perfluorohexylated 3,4-ethylenedioxythiophene 5 was prepared via Mitsunobu reaction of perfluorohexylatyed diol 2 with diethyl 3,4-dihydroxythiophenedicarboxylate followed by decarboxylation. The polymerization of 5 was conducted with both oxidative chemical and electrochemical polymerizations. The polymers were characterized by cyclic voltammogram, UV, IR, TGA and DSC.     

Effect of humidity on the adsorption kinetics of lung surfactant at air-water interfaces

The in vitro adsorption kinetics of lung surfactant at air-water interfaces is affected by both the composition of the surfactant preparations and the conditions under which the assessment is conducted. Relevant experimental conditions are surfactant concentration, temperature, subphase pH, electrolyte concentration, humidity, and gas composition of the atmosphere exposed to the interface. The effect of humidity on the adsorption kinetics of a therapeutic lung surfactant preparation, bovine lipid extract surfactant (BLES), was studied by measuring the dynamic surface tension (DST). Axisymmetric drop shape analysis (ADSA) was used in conjunction with three different experimental methodologies, i.e., captive bubble (CB), pendant drop (PD), and constrained sessile drop (CSD), to measure the DST. The experimental results obtained from these three methodologies show that for 100% relative humidity (RH) at 37 degrees C the rate of adsorption of BLES at an air-water interface is substantially slower than for low humidity. It is also found that there is a difference in the rate of surface tension decrease measured from the PD and CB/CSD methods. These experimental results agree well with an adsorption model that considers the combined effects of entropic force, electrostatic interaction, and gravity. These findings have implications for the development and evaluation of new formulations for surfactant replacement therapy.     

Simultaneous determination of sulfite, sulfate, and hydroxymethanesulfonate in atmospheric waters by ion-pair HPLC technique

A reversed-phase ion-pair HPLC with indirect photometric detection for the simultaneous determination of sulfite, sulfate, hydroxymethanesulfonate (HMS), and other inorganic anions in atmospheric water has been developed. Separations were accomplished in less than 10 min in a cetylpyridinium-coated C₁₈ column with 0.5 mM potassium hydrogen phthalate-0.015% triethanolamine-3% methanol at pH 7.9 as mobile phase. Quantitation was carried out by the peak area method, with detection limits in the pmol range. UV light absorption responses were linear over a wide concentration range from several hundred μmoles to the detection limits of each anion. The application of the method provides a rapid and efficient technique for the quantitative determination of sulfur and other inorganic species in atmospheric liquids.     

Photoassisted reaction of chemical warfare agent VX droplets under UV light irradiation

A photoassisted reaction of O-ethyl S-[2-(diisopropylamino) ethyl] methylphosphonothioate (VX) droplets in air was carried out. The experimental results indicated that VX droplets could be easily and chemically transformed into other compounds under irradiation of a germicidal lamp over sufficient time. Quantum chemical calculation results demonstrated that UV light less than 278 nm wavelength could possibly initiate photoreaction of VX and that both P-S and P=O bonds in the VX molecule were lengthened. The identification of reaction products by gas and liquid chromatography mass spectroscopy and NMR revealed that the VX molecule in air under UV light irradiation could undergo isomerization of S-esters to O-esters, cleavage of P-S, S-C, and C-N bonds, and ozonation of tertiary amines.     

Mass spectral fragmentation of (S,S)-2-substituted 4,4-diphenyl-3,1-oxazabicyclo[3.3.0]octanes: ring contraction of pyrrolidine and 1,3-oxazolidine in mass spectrometry

The mass spectral behaviour of (S,S)-2-substituted 4,4-diphenyl-3,1-oxazabicyclo[3.3.0]octanes has been studied with the aid of mass-analyzed ion kinetic energy spectrometry and accurate mass measurements under fast atom bombardment (FAB) and electron impact (EI) ionization conditions. Under FAB ionization, all compounds show a tendency to form protonated aldehyde or benzophenone ions and to form protonated 1-azabicyclo[3.1.0]hexane ions, which can further lose an ethylene or cyclopropane from the pyrrolidine ring to produce protonated 1-azabicyclo[1.1.0]butane ions and 3H-azirine ions, respectively. Under EI ionization, a similar fragmentation to that under FAB ionization was observed. The title compounds also show a tendency to yield oxirane ions and oxirenium ions by loss of pyrrolidine and pyrrolidine plus H. Ring contractions of 1,3-oxazolidine by loss of an aldehyde or ketone and of pyrrolidine by loss of an ethylene or cyclopropane were observed under both FAB and EI ionization conditions.     

Novel Gel—like Process for Synthesizing Submicron LiaNi0.8Co0.2O2 Powders Used in Lithium Ion Batteries

A novel gel-like process has been developed for synthesizing LiaNi0.8Co0.2O2 powders,using citric acid as a chelating agent. This process improves the homogeneity of constituent cation and enhances their reactivity in the obtained precursor. The results of electrochemical test demonstrated that these materials exhibited excellent electrochemical properties. Its initial capacity reached 181.6 mAh/g and reversible efficiency at the first cycle is about 88.6%.     

Preparation of [5,6]- and [6,6]-oxahomofullerene derivatives and their interconversion by Lewis acid assisted reactions of fullerene mixed peroxides

[60]Fullerene mixed peroxides C60(O)(OOtBu)4 exhibit chemo- and regioselective reactions under mild conditions. The epoxy moiety is opened by ferric chloride to form vicinal hydroxy chloride C60Cl(OH)(OOtBu)4. BF3 is also effective in opening the epoxy moiety. The O-O bond of the fullerene mixed peroxide is cleaved by aluminum chloride to form both [5,6]- and [6,6]-fullerene hemiketals (oxohomo[60]fullerenes). A Hock-type rearrangement is proposed for the formation of the hemiketals, in which a fullerene C-C bond is cleaved. Lewis acids and/or visible light can initiate isomerization of the hemiketal isomers. Single-crystal X-ray analysis and theoretical calculations confirmed the results.