Resonantly pumped Q-switched Er:GdVO4 laser

We describe a Q-switched Er:GdVO₄ laser resonantly pumped by a MgO-doped periodically poled LiNbO₃ optical parametric oscillator （MgO: PPLN OPO） at 1536 nm. In continuous-wave lasing, the maximum output power is 1.14 W with an incident pump power of 4.7 W and a slope efficiency of 27%. In Q-switched operation, 1.1 mJ of output pulse energy is achieved at 200 Hz. The upper-state lifetime at different pulse repetition frequencies is also calculated.     

Fabrication of rhenium Josephson junctions

Rhenium is a superconductor with a relatively weak tendency to oxidize, which is advantageous in superconducting quantum circuit and qubit applications. In this work, Re/A1-A1Ox/Re Josephson tunnel junctions were fabricated using a selective film-etching process similar to that developed in Nb trilayer technology. The Re films had a superconducting transition temperature of 4.8 K and a transition width of 0.2 K. The junctions were found to be highly reproducible using the fabrication process and their characteristics had good quality with a low leakage current and showed a superconducting gap of 0.55 meV.     

Octagonal dual-concentric-core photonic crystal fiber for C-band dispersion compensation with low confinement loss

A novel kind of octagonal dual-concentric-core photonic crystal fiber （PCF） is calculated with the finite element method （FEM） and proposed for broadband compensation. In order to realize highly negative dispersion, the hole diameter of the second ring is reduced relative to conventional PCFs. Numerical simulation results show that when the diameters of large holes and small holes are 0.77 pm and 0.5 #m, respectively, and the pitch of the adjacent rings is 1.1 μm, the negative dispersion can achieve about 840 ps.nm^-1.km^-1 at 1 550 nm and the dispersion slope can match with single mode fiber （SMF-28） perfectly. This PCF can compensate the positive dispersion and also its slope of about 50 times its length of SMF-28 fiber, which is suitable for C-band optical fiber telecommunication as a dispersion compensation fiber.     

Research on lenses assemble precision in complicate laser amplification system

In a certain amplification system, signal laser can be amplified from 1 nJ to 5 J. To realize a high quality imaging transfer, meet beam diameter expansion requirement, and get good filtering effects, three spatial filters are designed and assembled. Lenses in these spatial filters can be assembled and adjusted by their reflection spots to meet wave-front requirements. In this letter, we analyze precision of the assembling, and make a ray-tracing simulation to discuss the relation between assembling precision and lenses parameters. On the optimized distance of 1000 mm, adjusting precision of lens tilt can reach 5 mrad.     

Null testing toroidal surface and biconic surface with cylinder compensator

Toroidal surface and biconic surface are employed increasingly, however their profile cannot be null tested easily for they are non-rotationally symmetrical. Null testing method with cylinder compensator is proposed to solve this problem. The theory of this method is revealed. The errors of this method are present. Three typical testing optical systems with cylinder compensator are demonstrated at last. The design results and total error indicate that this method is feasible.     

Charge state effect on the K-shell ionization of iron by xenon ions near the Bohr velocity

Fe K-shell ionization cross sections induced by 2.4–6.0 MeV Xe20+are measured and compared with different binaryencounter-approximation(BEA)models.The results indicate that the BEA model corrected both by the Coulomb repulsion and by the effective nuclear charge(Zeff)agrees well with the experimental data.Comparison of Fe K-shell X-ray emission induced by 5 MeV xenon ions with different initial charge states(20+,22+,26+,30+)verifies the applicability of the effective nuclear charge(Zeff)correction for the BEA model.It is found that Zeffcorrection is reasonable to describe direct ionization induced by xenon ions with no initial M-shell vacancies.However,when the M shell is opened,the Zeffcorrected BEA model is unable to explain the inner-shell ionization,and the electron transfer by molecular-orbital promotion should be considered.     

Tm3+,Yb3+共掺钨酸钙多晶材料的上转换发光及荧光温度特性

采用高温固相法制备了Tm³⁺,Yb³共掺CaWO₄多晶材料. 980 nm二极管激光器激发下,在可见区获得了¹G₄→³H₆,¹G₄→³H₄,³H₂,³H₃→³H₆ 跃迁产生的上转换荧光. 讨论了Yb³⁺ 离子浓度的变化对Tm³⁺ 的上转换发光强度的影响,同时根据荧光强度比的方法研究了689 和705 nm 红色上转换荧光在313–773 K 范围内的温度特性. 结果表明：基于Tm³⁺,Yb³⁺ 共掺CaWO₄ 多晶材料的红色上转换荧光可以实现温度监测,其测温的最大灵敏度值为5.7×10^-4 K^-1,相应的测量温度为458 K. 关键词： 上转换发光 3+')" href="#">Tm³⁺ 钨酸钙 荧光温度传感     

全光扫描装置设计及实验研究

针对惯性约束聚变研究中高时间分辨测量的需求,详细分析并设计了一种新型的高时间分辨的全光扫描装置。该装置根据光生载流子效应、波导传输和棱镜色散原理,采用全光学元件,实现了全光器件的类条纹相机扫描功能。设计制作了具有棱镜结构和光偏转功能的全光扫描模块。以1053 nm激光为传输光,527 nm激光为泵浦光,完成了脉宽为8 ps的脉冲激光信号作用下的光偏转实验。从技术上验证了全光扫描技术的可行性。     

HTS双饼线圈的加工工艺及实验研究

详细介绍了高温超导双饼线圈的加工工艺和流程,针对绕制时带材弯曲形变使临界电流退化的技术难点,重点阐述了其解决方法。在液氮温度、自场环境下对采用该加工工艺制作的YBCO双饼线圈及Bi2223/Ag双饼线圈进行低温实验,测试其V-I特性曲线。实验结果表明:该工艺制作的双饼线圈性能良好,工艺安全可靠,是合适的。同时,实验测量数据也为线圈在磁体中的进一步应用提供了可靠依据。     

Synthesis of Fluorescent Gold Nanoclusters Directed by Bovine Serum Albumin and Application for Nitrite Detection

In the present work, gold nanocluster (GNC) induced by bovine serum albumin (BSA) was synthesized as a novel fluorescence probe to detect nitrite (NO₂ ^?) sensitively and selectively. The fluorescence of GNC was found to be quenched effectively by NO₂ ^?. Under the optimum conditions, it was found that the change of fluorescence intensity was proportional with the concentration of NO₂ ^? in the linear range of 0.1–50 μM (R?=?0.9990), with a detection limit (S/N?=?3) of 30 nM. The absorption spectroscopy, circular dichroism (CD), and X-ray photoelectron spectroscopy (XPS) studies were employed to discuss the quenching mechanism. In addition, the present approach was successfully applied in real water samples.