Structure and electrical properties of Pb(Zr<Subscript>0.25</Subscript>Ti<Subscript>0.75</Subscript>)O<Subscript>3</Subscript> thin films on LaNiO<Subscript>3</Subscript>—Coated thermally oxidized Si substrates

Pb(Zr_0.25Ti_0.75)O₃ (PZT25) thin films were prepared on LaNiO₃-coated thermally oxidized silicon substrates by chemical solution deposition method, where LaNiO₃ electrodes were also prepared by a chemical solution deposition technique. The dielectric constant and dielectric loss of the PZT25 thin films were 570 and 0.057, respectively. The remanent polarization and coercive field were 20.11 μC/cm² and 60.7 kV/cm, respectively. The PZT25 thin films on LaNiO₃-coated thermally oxidized silicon substrates showed improved fatigue characteristics compared with their counterparts on plantium-coated silicon substrates.     

Influence of Light Scattering by Residual Alumina Nanoparticles on the Analysis of Surfactants Adsorption Using Spectroscopy

The adsorption of a surfactant mixture, based on an anionic surfactant, sodium dodecyl benzenesulfonate (SDBS) and a nonionic surfactant (Triton X-100, or TX100), on alumina nanoparticles was determined by solution depletion method combined with spectrometric measurement. It is shown that the light scattering, originated from the residual adsorbent alumina particles in the supernatant after centrifugation separation, interferes with the measurements of absorbance of the surfactant molecules, and therefore constitutes an error source for determination of the surfactant concentration in the supernatant by spectrometric means. The intensity of this light scattering, namely the influence of the residual alumina nanoparticles upon the surfactant adsorption, was related to the surfactant adsorption and its equilibrium concentration and varied among a batch. In this paper we report a Kalman filter method in order to eliminate the variational scattering background caused by non-separated residual alumina nanoparticles in each supernatant. This method is of interest as it is simple, easy to carry out and of high precision.     

KINETICS OF SUSPENDED EMULSION POLYMERIZATION OF METHYL METHACRYLATE

The kinetics of suspended emulsion polymerization of methyl methacrylate (MMA), in which water acted as the dispersed phase and the mixture of MMA and cyclohexane as the continuous phase, was investigated. It showed that the initial polymerization rate (Rp0) and steady-state polymerization rate (Rp) were proportional to the mass ratio between water and oil phase, and increased as the polymerization temperature, the potassium persulphate concentration ([I]) and the Tween20 emulsifier concentration ([S]) increased. The relationships between the polymerization rate and [I] and [S] were obtained as follows: Rp0 ∝ [I]0.73[S]0.32 and Rp ∝ [I]0.71[S]0.23. The above exponents were close to those obtained from normal MMA emulsion polymerization. It also showed that the average molecular weight of the resulting poly(methyl methacrylate) decreased as the polymerization temperature, [I] and [S] increased. Thus, MMA suspended emulsion polymerization could be considered as a combination of many miniature emulsion polymerizations proceeding in water drops and obeyed the classical kinetics of MMA emulsion polymerization.     

含VE微胶囊的制备及其控制释放性能研究

以天然维生素E（VE）为芯材，利用Shirasu porous glass (SPG) 膜乳化结合液中干燥法，制备了粒径单分散的聚苯乙烯（PS）微胶囊.微胶囊的粒径为膜孔径的4倍，粒径单分散系数CV小于0.2.考察了改变PS和VE的比例及微胶囊的粒径对控制释放性能的影响.     

侧链液晶离聚物对PA1010/PP共混体系的增容作用

将聚酰胺（PA1010）、聚丙烯（PP）和热致型侧链液晶离聚物（SLCI）进行熔融共混，采用FTIR，SEM，DSC，WAXD研究测定了共混物中的相互作用，用形态结构，热行为和结晶行为，系统地研究了SLCI对PA101／PP共混物的增容作用。结果表明，SLCI有效地改善了PA1010／PP共混物的形态结构，增强了PA1010与PP链间的相互作用，使PA1010／PP熔点升高，结晶度提高。     

The growth of perylene on Ru(0001)

The structure of perylene adsorbed on Ru(0001) surface has been studied by ultraviolet photoemission spectroscopy (UPS) and low-energy electron diffraction. An ordered p(4x4) structure is observed from a monolayer (about 4 A thickness) of the perylene on Ru(0001) surface. UPS measurements show the molecular features, from the perylene multiplayer, between 2 and 10 eV below the Fermi level. Angle-resolved ultraviolet photoemission spectroscopy measurements suggest that the perylene molecular plane is parallel to the substrate. Temperature dependent UPS measurements show that the perylene multilayer is stable on Ru(0001) surface up to 125 degrees C. The desorption of the multilayer and the decomposition of the monolayer are observed above 125 degrees C.     

High speed liquid chromatography with small bore columns

Using a specially designed column system, we have systematically investigated the effect of mobile phase velocity on column efficiency. The performance of small bore columns operated at different linear velocities of mobile phase was examined for three different types of injection system. Using the value of H^∞/u or n^∞/t${}_{\text{r}}^{\text{º}}$ as a criterion of a high speed separation, we calculated values of n/t${}_{\text{r}}^{\text{º}}$ for different solutes according to the equation \documentclass{article}\pagestyle{empty}\begin{document}$ {{\rm n}\mathord{\left/ {\vphantom {{\rm n} {{\rm t}_{\rm r}^ \circ }}}\right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }} = {{{\rm n}^\infty } \mathord{\left/ {\vphantom {{{\rm n}^\infty } {{\rm t}_{\rm r}^ \circ }}} \right. \kern-\nulldelimiterspace} {{\rm t}_{\rm r}^ \circ }}\left({\frac{{1 + {\rm k'}}}{{{\rm k' + }\beta }}} \right)^2 $\end{document}; the results obtained are in agreement with the experimentally determined values. These systematic investigations culminated in the separation of seven compounds in less than 10 s; the respective chromatogram is shown.     

Numerical Investigation on the Effects of a Precursor Wetting Film on the Displacement of Two Immiscible Phases Along a Channel

A set of numerical experiments has been conducted to study the effect of a precursor fluid layer on the motion of two phase system in a channel. This system is characterized by coupled Cahn-Hillard and Navier-Stokes system together with slip boundary conditions. The solution of the governing equation involves first the solution of Cahn-Hillard equation with semi-implicit and Mixed finite element discritization with a convex splitting scheme. The Navier-Stokes equations are then solved with a P2-P0 mixed finite element method. Three cases have been investigated; in the first the effect of different wettability scenarios with no precursor layer has been investigated. In the second scenario, the effect of the precursor layer for different wettability conditions is investigated. In the third case, the effect of the thickness of the precursor layer is investigated. It is found that, wettability conditions have considerable effect on the flow of the considered two-phase system. Furthermore the existence of the precursor layer has additional influence on the breakthrough of the phases.