Bis(μ‐6‐hydroxy­picolinato)‐μ‐oxo‐bis­[di­pyridine­manganese(III)] monohydrate

The title compound, [Mn₂(μ‐O)(C₆H₃NO₃)₂(C₅H₅N)₄]·H₂O, was isolated from the reaction of 2,6‐pyridine­di­carboxylic acid with [Mn₁₂O₁₂(CH₃COO)₁₆(H₂O)₄] in pyridine. The dimanganese complex has twofold symmetry; the Mn^III atoms are bridged by one oxo and two amidate ligands and show compressed octahedral Jahn–Teller distortion. The molecular packing comprises a three‐dimensional structure constructed by means of extensive intermolecular interactions, including three kinds of hydrogen bonds and π–π interactions.     

An efficient method for constructing nonorthogonal localized molecular orbitals

A new method for constructing nonorthogonal localized molecular orbitals (NOLMOs) is presented. The set of highly localized NOLMOs is obtained by minimization of the spread functional starting from an initial set of canonical orthogonal molecular orbitals. To enhance the stability and efficiency, the centroids of the NOLMOs are constrained to be those of the corresponding orthogonal localized molecular orbitals (OLMOs), which are obtained with the Boys criterion in advance. In particular, these centroid constraints make the optimization for each NOLMO independent of the others, which is an attractive feature for application to large systems. The minimization with the constraints incorporated through the multiplier-penalty function method is stable and efficient in convergence. While exhibiting the classical bonding pattern in chemistry and sharing a spatial distribution similar to that of the corresponding OLMOs, the obtained NOLMOs are more compact than the corresponding OLMOs with about 10%-28% reduction in the value of the spread functional and devoid of the troublesome "orthogonalization tails."     

Transition‐Metal Chemistry of Alkaline‐Earth Elements: The Trisbenzene Complexes M(Bz)3 (M=Sr,Ba)

We report the synthesis and spectroscopic identification of the trisbenzene complexes of strontium and barium M(Bz)₃ (M=Sr, Ba) in low‐temperature Ne matrix. Both complexes are characterized by a D₃ symmetric structure involving three equivalent η⁶‐bound benzene ligands and a closed‐shell singlet electronic ground state. The analysis of the electronic structure shows that the complexes exhibit metal–ligand bonds that are typical for transition metal compounds. The chemical bonds can be explained in terms of weak donation from the π MOs of benzene ligands into the vacant (n?1)d AOs of M and strong backdonation from the occupied (n?1)d AO of M into vacant π* MOs of benzene ligands. The metals in these 20‐electron complexes have 18 effective valence electrons, and, thus, fulfill the 18‐electron rule if only the metal–ligand bonding electrons are counted. The results suggest that the heavier alkaline earth atoms exhibit the full bonding scenario of transition metals.     

Facile synthesis of highly dispersed palladium/polypyrrole nanocapsules for catalytic reduction of p-nitrophenol

In this study, a facile one-step redox polymerization method for the preparation of highly dispersed palladium (Pd)/polypyrrole (PPy) nanocapsules has been demonstrated. During the polymerizaion process, the formation of RB-PdCl(4)(2-) complex via an electrostatic interaction plays a key role for the preparation of Pd/PPy composite nanocapsules. The well-dispersed Pd nanocrystals with small sizes of 2-4 nm embedded in PPy nanocapsules exhibited a good catalytic activity during the catalytic reduction of p-nitrophenol into p-aminophenol by NaBH(4) in aqueous solution. The kinetic apparent rate constant (k(app)) was about 8.87×10(-3) s(-1). Moreover, the as-prepared Pd/PPy composite nanocapsules exhibited a good reusability, which could be repeatedly used for the reduction of p-nitrophenol with a high catalytic activity for at least 10 successive cycles.     

Comparing the structural stability of PbS nanocrystals assembled in fcc and bcc superlattice allotropes

We investigated the structural stability of colloidal PbS nanocrystals (NCs) self-assembled into superlattice (SL) allotropes of either face-centered cubic (fcc) or body-centered cubic (bcc) symmetry. Small-angle X-ray scattering analysis showed that the NC packing density is higher in the bcc than in the fcc SL; this is a manifestation of the cuboctahedral shape of the NC building block. Using the high-pressure rock-salt/orthorhombic phase transition as a stability indicator, we discovered that the transition pressure for NCs in a bcc SL occurs at 8.5 GPa, which is 1.5 GPa higher than the transition pressure (7.0 GPa) observed for a fcc SL. The higher structural stability in the bcc SL is attributed primarily to the effective absorption of loading force in specific SL symmetry and to a lesser extent to the surface energy of the NCs. The experimental results provide new insights into the fundamental relationship between the symmetry of the self-assembled SL and the structural stability of the constituent NCs.     

用前沿色谱法测定蛋白质吸附等温线时增浓方式的研究

用连续前沿色谱法和断续前沿色谱法测定了七种标准蛋白在疏水色谱填料上的吸附等温线,两种方法之间存在着一定的差别。从流出曲线突跃处斜率测定的不确定性、色谱过程中动力学因素和实验方法本身存在的问题等几个方面探讨了误差的来源,指出了可能解决这一问题的途径。     

Microsensor Chip Integrated with Gold Nanoparticles‐Modified Ultramicroelectrode Array for Improved Electroanalytical Measurement of Copper Ions

This paper presents a microsensor chip integrated with a gold nanoparticles‐modified ultramicroelectrode array (UMEA) as the working electrode for the detection of copper ions in water. The microsensor chip was fabricated with Micro‐Electromechanical System technique. Gold nanoparticles were electrodeposited onto the surface of UMEA at a constant potential of ?0.3 V. The ratio d/R_b of interelectrode spacing (d) over the individual electrode’s radius (R_b) was investigated to improve the electrochemical performance. The UMEA with a d/R_b of 20 showed the best hemispherical diffusion mode, resulted in fast response time and high current response. The gold nanoparticles increased the active surface area of UMEA by not changing the geometries of UMEA, and the current response was increased further. Incorporating the optimized characteristic of UMEA and gold nanoparticles, the microsensor showed a good linear range from 0.5 to 200 µg L^?1 of copper ions in the acetate buffer solutions with the method of square wave stripping voltammetry. Compared with the gold nanoparticles‐modified disk electrode, the gold nanoparticles‐modified UMEA showed higher sensitivity (0.024 µA mm^?2 µg^?1 L) and lower limit of detection (0.2 µg L^?1). Water samples from river water and tap water were analyzed by the microsensor chip with recovery ranging from 100.7 % to 107.8 %.     

Highly Efficient Organic Blue Electroluminescent Materials and Devices with Mesoscopic Structures

Due to the difficulty in achieving high efficiency and high color purity simultaneously, blue emission is the limiting factor for the performance and stability of OLEDs. Since 2003, we have been working on organic light‐emitting diodes (OLEDs), especially on blue light. After a series of molecular designs, novel strategies have been proposed from different aspects. At first, highly efficient deep blue emission could be achieved through molecular design with highly twisted structure to suppress fluorescence quenching and redshift. Deep blue emitters with high efficiency in solid state, a twisted structure with aggregation induced emission (AIE) characteristics was incorporated to inhibit molecular aggregation, and triplet‐triplet fusion (TTF) and hybridized localized charge transfer (HLCT) were adopted to increase the ratio of triplet exciton used. Secondly, a highly efficient blue OLED could be achieved through improving charge transport. New electron transport materials (ETMs) with wide band gap were developed to control charge transport balance in devices. Thirdly, a highly efficient deep blue emission could be achieved through a mesoscopic structure of out‐coupling layer. A mesoscopic photonic structured organic thin film was fabricated on the top of metal electrode by self‐aggregation in order to improve the light out‐coupling efficiency.     

Separation,Quantification and Structural Study of (+)‐Catechin and (–)‐Epicatechin by Ion Mobility Mass Spectrometry Combined with Theoretical Algorithms

Two catechin epimers and their non‐covalent complexes with γ‐cyclodextrin were studied by using ion mobility coupled with mass spectrometry (IM‐MS). Rapid separation of complexes was achieved with the peak‐to‐peak resolution reaching 0.86 after optimization of IM condition. Collision cross section (CCS) was measured to explore the structural difference of complexes. A gap of 11.75 Ų between two complexes was found. Molecular modeling and theoretical CCS calculation were adopted to explain the measurement results. Two binding ways of both complexes were found and the calculated CCS corresponds accurately to the measured CCS. Quantification of catechins in mixtures was performed and the relative error was less than 15%, indicating the effectiveness of quantification by IM‐MS.     

Solid state synthesis of copper(I) thiotungstate cluster compounds at low heating temperatures. Crystal structures of [(n-Bu)4N]3-[WS4Cu3Cl3Br] and [Et4N]4[WS4Cu4I6]

Summary Reaction of [NH₄]₂[WS₄] with CuX (X = Cl or I) and R₄NX (R = Et or n-Bu) in the solid state gave two new bimetallic compounds with W:Cu compositions from 1:3 to 1:4. Compound (1), [(n-Bu)₄N]₃[WS₄Cu₃Cl₃Br], crystallizes in the hexagonal space group R3c with a = 17.051(5), c = 38.372(5) Å, V = 9661.8 ų, Z = 6. The cluster anion of (1) comprises a cubane-like cluster core [WS₃Cu₃Br] of C₃ symmetry with a Cl atom attached to each of the three Cu atoms and one terminal sulphido ligand attached to the W atom. Compound (2), [Et₄N]₄[WS₄Cu₄I₆], crystallizes in the monoclinic space group C2/m with a = 29.702(6), b = 12.7887(5), c = 15.327(3)Å, = 99.69(2), V = 5738.1 ų, Z = 4. In the cluster anion of (2), four edges of the WS₄ core are coordinated by four Cu atoms, giving a WS₄Cu₄ aggregate of approximate C_2V symmetry.