Speciation analysis of selenium enriched green onions (Allium fistulosum) by HPLC-ICP-MS

Green onions (Allium fistulosum) enriched with 10 or 100 μg mL^− 1 Se(IV) or SeMet were analyzed for total selenium and species distribution. Anion and cation exchange chromatographies were applied for the separation of selenium species with mass spectrometric detection. Two different sample preparation methods (NaOH and enzymatic) were compared from the Se extraction efficiency point of view. Total selenium concentration accumulated by the onions reached the 200 μg g^− 1 level expressed for dry weight when applying SeMet at a concentration of 100 μg mL^− 1 as the source of Se. Speciation studies revealed that both in onion bulbs and leaves the predominant form of organic selenium is Se-methyl-selenocysteine (MeSeCys). When Se(IV) was applied for Se-enrichment at a concentration level of 100 μg mL^− 1 both onion leaf and bulb contained a significant amount of inorganic selenium. An unknown compound was also detected.     

Interaction of tetraphenyl-porphyrin derivatives with DPPC-liposomes: an EPR study

The effect of the symmetry and polarity of the porphyrin molecules on their membrane localization and interaction with membrane lipids were investigated by electron paramagnetic resonance (EPR). For this purpose, two glycoconjugated tetraphenyl porphyrin derivatives were selected, respectively, symmetrically and asymmetrically substituted. Small unilamellar liposomes composed of dipalmitoylphosphatidylcholine (DPPC) and spin labeled stearic acids were prepared. The spin probe was located at the 5th or 7th or 12th or 16th position of the hydrocarbon chain in order to monitor various regions of the lipid bilayer. EPR spectra of porphyrin-free and porphyrin-bound liposomes were recorded at various temperatures below and above the phase transition temperature of DPPC. The effect on membrane fluidity proved to be stronger with the asymmetrical porphyrin derivative than with the symmetrical one. The rigidity increased when the spin label was near lipid head groups. The difference observed between control and porphyrin-treated samples when measured below the main lipid transition temperature disappeared at higher temperature. When the spin label was near the end of the hydrophobic tails, the symmetrical porphyrin derivative caused increase in fluidity, while the asymmetrical one slightly decreased it. To explain this phenomenon we propose that the asymmetrical derivative exerts a stronger ordering effect caused by its fluorophenyl group located at the level of the lipid heads, which is attenuated to the hydrophobic tails. The perturbing effect of the symmetric derivative could not lead to similar extent of ordering at the head groups and looses the hydrocarbon chains deeper in the membrane.     

Assignment of Saharan dust sources to episodes in Hungarian atmosphere by PIXE and TOMS observations

Summary Thirty-seven episodes of dust intrusion were observed between February 12, 1991 and August 31, 2000 in the Hungarian atmosphere and found to be of Saharan origin. They have been assigned to typical source areas in Northern Africa selected by systematic investigations related to the Mediterranean Basin. Elemental concentrations and regional signatures deduced from PIXE analysis, total suspended particle mass, and black carbon mass have been measured on dust samples collected in Debrecen, Hungary. These data combined with Aerosol Index data, and dust plume axes obtained from TOMS data from NASA satellites were used for assigning the most probable source areas of the dust transported to the sampling site. Our data and conclusions are in accordance with other published investigations on the predominant role of Saharan dust emission in building up the aerosol load of the global atmosphere.     

Investigation of the species-specific degradation behaviour of methylmercury and ethylmercury under microwave irradiation

The degradation behaviour of methylmercury (MeHg) under microwave irradiation is investigated, as is the (different) degradation behaviour of ethylmercury (EtHg) under similar irradiation. A simple and highly sensitive SPME-GC-pyrolysis-AFS system was used to analyse the aqueous MeHg and EtHg standard solutions after derivatization with sodium tetraphenylborate (NaBPh₄). Samples were irradiated in a microwave digester at microwave powers ranging from 20 to 160 W for durations of 2 to 10 min. The different tolerances towards microwave treatment of the two organomercury species were evident. Practically no degradation was experienced for MeHg for up to 8 minutes of irradiation at 120 W or for up to 4 minutes at 160 W. Significant analyte loss was observed for EtHg after 2 minutes at 40 W of microwave power. Awarded a Poster Prize on the occasion of the European Winter Conference on Plasma Spectrochemistry, February 2005, Budapest, Hungary     

Density functional study of infinite polyserine chains

Two different helical conformations (alpha and 3-10 helices) of polyserine are studied using density functional theory. The infinite system characterized by exact translational-rotational symmetry is examined in vacuum using the BLYP exchange-correlation functional. Geometry analysis in terms of hydrogen bond strength and total energies of the different conformers are presented. The structural changes due to the presence of the serine side chain are identified comparing the polyserine and polyglycine chains. The rotational energy curves of the side chain are presented for both investigated helices. Band structures of polyserine and polyglycine conformers are also compared.     

Characterization of Lippia sidoides oil extract-b-cyclodextrin complexes using combined thermoanalytical techniques

Thermoanalytical techniques, being rapid and un-expensive have been used for the investigation of the cyclodextrin inclusion complexes for three decades. The conventional thermoanalytical techniques (TG and DTA/DSC) follow the thermal properties of the uncomplexed compounds. Consequently, the inclusion complex formation as well as the liberation of the entrapped guest cannot be followed. Monitoring the products of the thermal fragmentation of parent cyclodextrin and the included molecule(s), applying TG-MS combined technique provides evidence concerning the inclusion complex formation, and besides, gives selective signal to follow the decomposition of the cyclodextrin inclusion complexes. b-cyclodextrin inclusion complexes of Thymol and Lippia sidoides Cham essential oil extract have been prepared and investigated using conventional and combined (TG-MS) thermoanalytical techniques. The evolved gas analysis proved the inclusion complex formation between the host and guests. By the evaluation of the experimental results the elaboration of the entrapped guests from the cyclodextrin cavity could be followed. This revised version was published online in July 2006 with corrections to the Cover Date.     

Nitrofuran antibiotic residues in pork: The FoodBRAND retail survey

Use of nitrofuran drugs in food-producing animals has been prohibited within the EU because they may represent a public health risk. Monitoring compliance with the ban has focused on the detection of protein-bound nitrofuran metabolites which, in contrast to the parent compounds, are stable and persist in animal tissues. As part of the “FoodBRAND” project, an extensive survey of pork was undertaken across 15 European countries. Samples (n = 1500) purchased at retail outlets were analysed for the nitrofuran metabolites AOZ, AMOZ, AHD and SEM using LC–MS/MS determination of nitrobenzaldehyde derivatives. Limits of quantification for the method were 0.1 μg/kg (AOZ, AMOZ), 0.2 μg/kg (SEM) and 0.5 μg/kg (AHD). Of the 1500 samples tested, measurable residues of nitrofuran metabolites were confirmed in 12 samples (0.8% incidence overall) of which 10 samples were purchased in Portugal (AOZ, 0.3 μg/kg; AMOZ, 0.2–0.6 μg/kg) and one sample each in Italy (AMOZ, 1.0 μg/kg) and Greece (AOZ, 3.0 μg/kg).     

An improved method for assay of vitamin C in fish feed and tissues

Summary A method was devised to assay four forms of vitamin C: L-ascorbic acid (AA), dehydroascorbic acid (DHA), ascorbate-2-mono- and polyphosphate (AMP, APP), as well as ascorbate-2-monosulphate (AMS), in sample series of different fish tissues and feed. Direct and indirect detection were combined. Sample extractions were carried out with 0.2 mol L⁻¹ sodium acetate buffer (pH 4.8) and extracts were deproteinized after different chemical or enzymatic reactions, with perchloric acid. The DHA was reduced to AA with dithioerythritol (DTE). Ascorbate oxidase enzyme was used for the detection of background and an acidic phosphatase enzyme for the hydrolysis of different phosphate esters. Ascorbate-2-sulphate was detected directly with help of coinjection of the compound. Chromatographic analysis was carried out with a single column isocratic reverse phase method. The mobile phase was an aqueous buffer of 0.04 M sodium-acetate, 0.05 mM EDTA, 0.5 mM tetrabutylammonium dihydrogen phosphate (TBA) adjusted to pH 3.76 with 85% H₃PO₄ and with 24 mL methanol added to 1000 mL. C-18 columns were used with 0.6 mL min⁻¹ flow rate at 23°C. The vitamin C forms were detected by UV absorption at 250 nm. The determination limit was 1.0–5.0 μg g⁻¹ in AA equivalent. The standard deviations were between 1–6% and depended on the concentrations of vitamin C forms and tissues. Recoveries were between 90–96% in samples. Presented at: Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 3–5, 1997     

Iminodiacetic acid/ethylcellulose as a chelating ion exchanger : Part 1. Determination of trace metals by atomic absorption spectrometry and collection of uranium

A chelate-forming ion exchanger, iminodiacetic acid/ethylcellulose, is used for the separation of trace metals from waters and different organic solvents. Added uranium was collected from sea waters with recoveries of about 97%. Graphite-furnace atomic absorption spectrometry and solution spectrophotometry were used to quantify the metals. For the direct determination of trace metals in waters by the graphite-furnace method, a simple matrix-matching method is described. The detection limit for cadmium was 0.1 μg l^?1 and for lead 1 μg^?1 in drinking water.     

Analysis of actinides in the primary coolant of a WWER-440 type reactor

A simple and effective method has been developed for the determination of the transuranium isotopes in primary coolant samples of WWER-440 type reactors. Membrane filters containing undissolved particles from about one liter coolant were destroyed by mineral acids, then americium-curium isotopes and neptunium-plutonium isotopes were coprecipitated sequentially with NdF₃ based on their different redox behavior. Alpha-spectra were determined by silicon semiconductor detectors connected to multichannel analyzers. Activity ratios measured in a reactor unit with a failed fuel element were compared with calculated values of the same type of reactor under similar conditions. Parameters of the defective fuel (burnup, original enrichment) could be estimated.