Radiation Induced Grafting of Glycidylmethacrelate onto Polypropylene Films for Removal of Mercury from Aqueous Solutions

This work illustrates the modification of polypropylene (PP) films through its grafting with glycidylmethacrelate monomer (GMA). Further chemical treatment of PP-g-GMA to convert epoxy groups into amine groups is discussed. Different factors affecting the grafting percent such as solvents, monomer concentrations, irradiation dose have been studied. Fourier transform infrared (FTIR) and thermogravimetric (TGA) analysis confirm the grafting of PP. Morphological changes of PP, PP-g-GMA and treated PP-g-GMA are confirmed by scanning electron microscopy (SEM). The X-ray diffraction (XRD) pattern shows changes in the crystallinity on grafting. Adsorption and kinetic studies of mercury onto the prepared PP grafted and chemically treated films in sorption of Hg^{+ 2} metal ions from aqueous solutions have been studied. The experimental data fit favorably to the Langmuir isotherm with a high correlation coefficient. Moreover, the pseudo first and second order kinetics is also indicated. The results suggest that the pseudo-second-order kinetic model better represent the adsorption kinetics, suggesting that the adsorption process may be chemisorptions. It is more likely to predict that the adsorption behavior may involve valence forces through the sharing of electrons between Hg^{2 +} and adsorbent. On the basis of these investigations, the applicability of the prepared membranes is discussed. Also the confirmation of metal ions adsorbed was confirmed using EDS spectrometric techniques.     

Development and validation of a sensitive UHPLC‐MS/MS method for the simultaneous analysis of tramadol,dextromethorphan chlorpheniramine and their major metabolites in human plasma in forensic context: application to pharmacokinetics

The prerequisites for forensic confirmatory analysis by LC/MS/MS with respect to European Union guidelines are chromatographic separation, a minimum number of two MS/MS transitions to obtain the required identification points and predefined thresholds for the variability of the relative intensities of the MS/MS transitions (MRM transitions) in samples and reference standards. In the present study, a fast, sensitive and robust method to quantify tramadol, chlorpheniramine, dextromethorphan and their major metabolites, O‐desmethyltramadol, dsmethyl‐chlorpheniramine and dextrophan, respectively, in human plasma using ibuprofen as internal standard (IS) is described. The analytes and the IS were extracted from plasma by a liquid–liquid extraction method using ethyl acetate–diethyl‐ether (1:1). Extracted samples were analyzed by ultra‐high‐performance liquid chromatography coupled to electrospray ionization tandem mass spectrometry (UHPLC‐ESI‐MS/MS). Chromatographic separation was performed by pumping the mobile phase containing acetonitrile, water and formic acid (89.2:11.7:0.1) for 2.0 min at a flow rate of 0.25 μL/min into a Hypersil‐Gold C₁₈ column, 20 × 2.0 mm (1.9 µm) from Thermoscientific, New York, USA. The calibration curve was linear for the six analytes. The intraday precision (RSD) and accuracy (RE) of the method were 3–9.8 and ?1.7–4.5%, respectively. The analytical procedure herein described was used to assess the pharmacokinetics of the analytes in 24 healthy volunteers after a single oral dose containing 50 mg of tramadol hydrochloride, 3 mg chlorpheniramine maleate and 15 mg of dextromethorphan hydrobromide. Copyright © 2014 John Wiley & Sons, Ltd.     

Exploring Cu/Al cluster growth and reactivity: from embryonic building blocks to intermetalloid,open-shell superatoms

Cluster growth reactions in the system [Cu₅](Mes)₅ + [Al₄](Cp*)₄ (Mes = mesitylene, Cp* = pentamethylcyclopentadiene) were explored and monitored by in situ LIFDI-MS and ¹H-NMR. Feedback into experimental design allowed for an informed choice and precise adjustment of reaction conditions and led to isolation of the intermetallic cluster [Cu₄Al₄](Cp*)₅(Mes) (1). Cluster 1 reacts with excess 3-hexyne to yield the triangular cluster [Cu₂Al](Cp*)₃ (2). The two embryonic [Cu₄Al₄](Cp*)₅(Mes) and [Cu₂Al](Cp*)₃ clusters 1 and 2, respectively, were shown to be intermediates in the formation of an inseparable composite of the closely related clusters [Cu₇Al₆](Cp*)₆ (3), [HCu₇Al₆](Cp*)₆ (3H) and [Cu₈Al₆](Cp*)₆ (4), which just differ by one Cu core atom. The radical nature of the open-shell superatomic [Cu₇Al₆](Cp*)₆ cluster 3 is reflected in its reactivity towards addition of one Cu core atom leading to the closed shell superatom [Cu₈Al₆](Cp*)₆ (4), and as well by its ability to undergo σ(C–H) and σ(Si–H) activation reactions of C₆H₅CH₃ (toluene) and (TMS)₃SiH (TMS = tris(trimethylsilyl)).

Cu/Al cluster growth reactions leading to open- and closed-shell superatoms are investigated. Therein, LIFDI-MS is presented as a powerful technique for the in situ detection of cluster identities and reactivity patterns.     

Rapid determination of NSAIDs by capillary and microchip electrophoresis with capacitively coupled contactless conductivity detection in wastewater

A simple, rapid method using CE and microchip electrophoresis with C⁴D has been developed for the separation of four nonsteroidal anti-inflammatory drugs (NSAIDs) in the environmental sample. The investigated compounds were ibuprofen (IB), ketoprofen (KET), acetylsalicylic acid (ASA), and diclofenac sodium (DIC). In the present study, we applied for the first time microchip electrophoresis with C⁴D detection to the separation and detection of ASA, IB, DIC, and KET in the wastewater matrix. Under optimum conditions, the four NSAIDs compounds could be well separated in less than 1 min in a BGE composed of 20 mM His/15 mM Tris, pH 8.6, 2 mM hydroxypropyl-beta-cyclodextrin, and 10% methanol (v/v) at a separation voltage of 1000–1200 V. The proposed method showed excellent repeatability, good sensitivity (LODs ranging between 0.156 and 0.6 mg/L), low cost, high sample throughputs, portable instrumentation for mobile deployment, and extremely lower reagent and sample consumption. The developed method was applied to the analysis of pharmaceuticals in wastewater samples with satisfactory recoveries ranging from 62.5% to 118%.     

Guidelines to design new spin crossover materials

This review focuses on new families of spin crossover (SCO) complexes based on polynitrile anions as new anionic ligands or on polyazamacrocycles as neutral macrocyclic ligands. We have shown that the structural and electronic characteristics (original coordination modes and high electronic delocalization) of the polynitrile anions can be tuned by slight chemical modifications such as substitution of functional groups or variation of the negative charge to design new discrete or polymeric SCO systems.In our ongoing work on the design of new molecular systems based on new ligands that can be fine-tuned via chemical modifications, another promising way which has been recently developed in our group concerns the use of new neutral polydentate ligands which are able to tune the ligand field energy around the metal centre. Here we report some recent original Fe(II) SCO complexes based on such polydentate ligands.     

Polynitrile anions as ligands: From magnetic polymeric architectures to spin crossover materials

The use of polynitrile anions as ligands (L) either alone or in combination with neutral co-ligands (L′) is a very promising and appealing strategy to get molecular architectures with different topologies and dimensionalities thanks to their ability to coordinate and bridge metal ions in many different ways. The presence of several potentially coordinating nitrile groups (or even other donor groups as –OH, –SH or –NH₂), their rigidity and their electronic delocalization allow the synthesis of original magnetic high dimensional coordination polymers with transition metals ions. Furthermore, these ligands have shown coordinating and bridging capabilities in novel discrete and polymeric bistable materials (materials showing original magnetic behaviours or spin crossover (SCO) transitions). Here we report an overview of the results obtained with some of these modified polynitrile ligands, showing their rich coordination chemistry and their crucial role in new molecular materials exhibiting unusual magnetic transitions.     

Photoelectrocatalytic disinfection of E. coli suspensions by iron doped TiO2

Photoelectrocatalytic disinfection of E. coli by an iron doped TiO(2) sol-gel electrode is shown to be more efficient than disinfection by the corresponding undoped electrode. Thus, the improvements in photocatalytic efficiency associated with selective doping have been combined with the electric field enhancement associated with the application of a small positive potential to a UV irradiated titanium dioxide electrode. The optimum disinfection rate corresponds to the replacement of approximately 0.1% of the Ti atoms by Fe. The enhanced disinfection associated with iron doping is surprising because iron doping decreases the photocurrent, and photocurrent is generally taken to be a good indicator of photoelectrocatalytic efficiency. As the level of iron is increased, the character of the current-voltage curve changes and the enhancement of photocurrent associated with methanol addition decreases. This suggests that iron reduces the surface recombination which in the absence of iron is reduced by methanol. Therefore the enhanced photocatalysis is interpreted as due to iron reducing surface recombination, by trapping electrons. It is proposed that at low iron levels the photo-generated electrons are trapped at surface Fe(III) centres and that consequently, because the electron-hole recombination rate is reduced, the number of holes available for hydroxyl radical formation is increased. It is also proposed that at higher iron levels, the disinfection rate falls because electron hole recombination at iron centres in the lattice reduces the number of holes which reach the surface. Our conclusion that the optimum electrode performance is a balance between surface and bulk effects is consistent with the proposal, of earlier authors for photocatalytic reactions, that the optimum dopant level depends on the TiO(2).