近江牡蛎受精细胞学研究

用醋酸──地衣红染色的方法对近江牡蛎人工授精的卵子减数分裂和受精过程进行了详细的细胞学观察．精子入卵前，卵子处于第一次减数分裂的前期（胚泡期），精子入卵后，胚泡消失，然后进行两次减数分裂，在海水温度为２８．８℃的情况下，授精后３３ｍｉｎ和４５ｍｉｎ，绝大部分受精卵已排出第一极体和第二极体，雄原核可在第一极体排出后及第二极体排出前任何时期内形成，雌雄原核以联合的方式将两组染色体合并，授精后１ｈ，大部分卵子完成第一次卵裂．在２５℃和２６℃授精的情况下，观察到了较多的多精入卵的现象．卵子发育的非同步性现象非常明显．     

以印染废水为主的城镇污水处理厂锑污染来源特征分析

为研究以印染废水为主的城镇污水处理厂锑污染来源特征,对浙江省嘉善县某污水处理厂及纳管行业进行水体锑（Sb）的采样分析,同时对印染和喷水纺织两大行业的锑污染源进行分析.研究表明,在污水处理厂纳管废水中,印染行业废水占纳管总量的55.2%,排锑量占总量的79.3%,是该污水处理厂锑污染的主要来源;在印染生产过程中,布料中锑的平均流失量为7 mg·kg^-1,平均损失率为13%,污染物锑在退浆、水洗和染色工艺段中的释放量依次为：染色 > 退浆 > 水洗;喷水纺织织造工艺中锑的释放量较少,布料中锑的平均流失量为2.2 mg·kg^-1,平均损失率仅为2.1%;污水处理厂进出水、印染各工段废水和织造废水中,锑主要以Sb（V）形态存在.     

光热敏折变玻璃及其布拉格体光栅特性研究

采用高温二次化料的方法制备了一种SiO2-Al2O3-ZnO-Na2O(F、Br)玻璃体系的光热敏折变(PTR)玻璃,通过紫外曝光、透射率光谱、X射线衍射(XRD)和差热分析等方法研究了其光热敏析晶机理。研究表明,PTR玻璃的光敏区为280～350nm,工作区为400～2700nm,最佳成核温度和析晶温度分别为490℃和595℃,析晶组分为NaF晶体。采用双光束干涉方法与"两步法"的热处理工艺在PTR玻璃中制备了周期为1000mm-1的布拉格体光栅,光栅的相对衍射效率达到91%,并验证了制备的布拉格体光栅具有角选择滤波能力。     

Threshold gain behavior of lasing modes in two-dimensional active random media

The pumping rate dependence of the peak intensity of the individual lasing mode in two-dimensional (2D) active random media is investigated. The results show that these modes have a typical threshold gain behavior and different threshold pumping rates. There exists a certain correspondence between the mode's threshold pumping rate and its lifetime, and the longer the lifetime is, the lower the threshold is.     

微波消解-火焰原子吸收光谱法测定三七中的微量元素

采用微波消解处理三七,用火焰原子吸收光谱法测定Mn、Zn、Cu、Fe4种微量元素的含量.三七中Mn、Zn、Cu、Fe含量分别为9.30、19.54、178.45、3.05μg· g-1.该方法加标回收率在98.1％-102.8％之间,方法简单、快捷、准确,可为三七的现代研究提供依据.     

Experiments and analysis of thin tungsten slice and W/Cu brazing for primary collimator scraper in CSNS/RCS

According to the requirements for the beam collimation system of the rapid cycling synchrotron(RCS)of China Spallation Neutron Source(CSNS),the main structure of a scraper of primary collimator is made by W/Cu brazing,in which the thickness of tungsten slice is 0.17 mm.In order to get the best mechanical properties,the brazing temperature is suggested to be controlled under the recrystallization temperature of tungsten,while the recrystallization temperature is affected directly by the thickness of tungsten.Because of little research and application on the brazing of thin tungsten slice of 0.17 mm and copper,tensile tests are done to get the mechanical properties of tungsten slices which experience different brazing temperatures.In keeping the inner relationships between the mechanical properties and temperature,another experiment is done by using SEM to scan the microstructures including the size and distribution of crystals.Finally we determine the recrystallization temperature of tungsten slice of 0.17 mm,and get the best parameters of W/Cu brazing for scrapers of primary collimator in CSNS/RCS.     

Study on scattering correction in fast neutron tomography at NECTAR facility

Fast neutron tomography has been established as an inspection and detection tool at the NECTAR facility at the FRM-II reactor.Scattered neutrons from the object become a major disturbance and bring in artifacts and deviations in reconstruction results,especially for hydrogenous material object.In this article,an iterative scattering correction method for fast neutron tomography was proposed.In each loop of iteration the scattering component of the projections will be simulated by Monte-Carlo program MCNPX based on the previous reconstruction result and then it will be subtracted from original projections.The differences between scattering components at different perspectives were quantitatively evaluated and an average scattering component image was used for all projections finally.Smooth and uniform slices with more clear edges were obtained and the new reconstructed attenuation coefficients are quite close to the real one compared to the results without scattering correction,in which case the relative error of the reconstructed attenuation coefficients is about 10%–30%.     

边缘效应对小型平直翅片管束传热和阻力性能的影响

本文通过数值模拟方法对四排管叉排布置的小型平直翅片管束的传热和阻力性能进行了研究,分析了边缘效应对小型翅片管束传热和阻力性能的影响,结果表明,6-6-6-6布管方式优于6-5-6-5布管方式,在只有较少换热管的小型翅片管换热器中,边缘效应不可忽略,实际整体模型的阻力系数比文献中常用的简化对称模型小13%~14%,努塞尔数小15%~18%,本文提出的公式可用于快速而准确地估算小型平直翅片管束的努塞尔数和阻力系数.     

Hollow glass microspheres coated with CoFe2O4 and its microwave absorption property

Spinel CoFe₂O₄ coating on the surface of hollow glass microspheres of low density was synthesized by co-precipitation method. The phase structures, morphologies, particle size, shell thickness, chemical compositions of the composites have been characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FESEM) and energy dispersive X-ray spectroscopy (EDS). The results show that CoFe₂O₄ coating on hollow glass microspheres can be achieved, and the coating layers are constituted by CoFe₂O₄ nanoparticles of mean size ca. 10 nm. The as-synthesized powder materials were uniformly dispersed into the phenolic cement, then the mixture was pasted on metal plate with the area of 200 mm×200 mm as the test plate. The test of microwave absorption was carried out by the radar-absorbing materials (RAM) reflectivity far field radar cross-section (RCS) method. The results indicate that the coated CoFe₂O₄/hollow glass microspheres composites can be applied in lightweight and strong absorption microwave absorbers.