脱氧核糖核酸与对二甲氨基偶氮苯邻羧酸作用机理的荧光光谱研究

通过实验,采用荧光光谱法研究了对二甲氨基偶氮苯邻羧酸(JJR)与脱氧核糖核酸(DNA)结合反应的特征.由Stern-Volmer方程和双倒数曲线Lineweaver-Burk方程获得了反应的猝灭常数Ksv=1×106～2×106 L/mol、结合常数KA≈0.5×106 mol/L以及对猝灭的类型做出了推断.通过热力学参数、离子强度实验讨论并得到它们以氢键、嵌插入、范德华力等几种方式作用.该反应的最佳实验条件为pH值控制在6.1左右;加入顺序为JJR+DNA+(B-R)适宜反应体系;线性范围在0～100 mg/L之间.     

Modification of Cr/SiO2 for the dehydrogenation of propane to propylene in carbon dioxide

Summary Dehydrogenation of propane to propylene in carbon dioxide was investigated over promoted Cr/SiO2. The results showed that the catalysts were effective for the reaction and CO2 in the feed promoted the catalytic activity. XRD, TPR and microcalorimetric adsorption techniques were used to study the structure and surface acidity of the catalysts. It was found that the surface acidity decreased with the increase of K in the Cr/SiO2 and led to the increase of selectivity toward propylene. A propane conversion of 31% with 91% selectivity to propylene over the 5%Cr-0.4%K/SiO2 catalyst was observed at 923 K with CO2 /C3H8 molar ratio of 3.6.     

BCA法测定蜜蜂变应原中的蛋白含量

建立了用二喹啉甲酸(BCA)法测定蜜蜂变应原中蛋白含量的方法。经t检验证明,该方法的测定结果与微量凯氏定氮法无显著差异,测定结果的相对标准偏差为3．1％。该方法操作简便,结果准确可靠,可替代微量凯氏定氮法。     

Gap Space Optimization for NO Removal in a Non‐thermal Plasma Discharge

Given the operational constraints of aerospace ground equipments (AGE), the nonthermal plasma discharge (NTPD) has been identified as a promising technology for their NO_x removal. As part of a program to optimize an NTPD system for this particular application, an investigation of the effect of discharge gap spacing on the electrical and chemical processes that occur in NTPDs was initiated. A number of experiments were performed to examine how the gap spacing affects the NO removal efficiency, discharge characteristics, and chemical reactions in a NTPD device. Gap spacings ranging from 0.8 to 4.0 mm were investigated in this study. An optimum gap spacing for NO removal was observed at approximately 2 mm and, based on the experimental data, a physical explanation for the optimum was developed. The experiments, results and conclusions are discusssed in detail in this paper.     

固定化脂质体色谱研究中药复方的细胞膜通透性成分及其质量控制

提出了固定化脂质体色谱(immobilized liposome chromatography,ILC)研究中药复方的细胞膜通透性成分及其质量控制的方法。以当归补血汤及其组分为例,考察了它们在ILC色谱柱上的分离效果;当归补血汤水提取液和75％乙醇提取液在ILC色谱柱上各有8个保留峰,当归水提取液、甲醇提取液和75％乙醇提取液在ILC色谱柱上分别有3、6、9个保留峰,黄芪水提取液、甲醇提取液和75％乙醇提取液在ILC色谱柱上各有7个保留峰;建立了当归补血汤及其组分中阿魏酸和蒿本内酯的定量分析方法,当归补血汤水提取液和75％乙醇提取液中阿魏酸的含量分别为0．0743％和0．0688％,蒿本内酯的含量分别为0．0472％和0．457％,当归水提取液和75％乙醇提取液中阿魏酸的含量分别为0．0694％和0．0691％,蒿本内酯的含量分别为0．0781％和0．455％。     

Quantum chemical study on the abstraction reaction of alkylidenegermylene with oxirane and thiirane

The mechanisms of theion reaction of alkylidenegermylene with oxirane and thiirane have been characterized detail in using density functional theory, as well as ab initio method, including geometry optimization and vibrational analysis for the involved stationary points on the potential energy surface. Energies were calculated by CCSD(T)/6-311G(d)//B3LYP/6-311G(d,p) method for the involved conformations. The results show that the reaction pathways for both reactions consist of two ways: (1) the reactants can yield bent products (P1; P4) by syn-isomers; (2) the reactants can also yield three-membered products (P2; P5) by anti-isomers, which then further react with oxirane and thiirane to form the ultimate products (P3-1, P3-2; P6). Furthermore, a comparison with alkylidenecarbene, oxirane, and thiirane was done.     

Role of Bipolar Pulsed DBD on the Growth of <Emphasis Type="Italic">Microcystis aeruginosa</Emphasis> in Three-Phase Discharge Plasma Reactor

Algae in drinking water supplies often bring about impact on the water treatment. In this study, a bipolar pulsed dielectric barrier discharge system in three-phase discharge plasma reactor was constructed for investigating its ability to control excessive growth of cyanobacteria, Microcystis aeruginosa. Experimental results show there was almost no change in optical density immediately after the interruption of electrical discharge, but the decreasing trend of optical density, cell density and chlorophyll-a content was obvious during the incubation period, indicating a significant residual effect of electrical discharge process on the algal growth inhibition. Scanning electron microscopy investigation of algae revealed surface damage, apparent leakage of intracellular contents and pores formed after electrical discharge process, which showed that algal cells had no potential to survive and grow. Compared with the control sample, it was observed that electrical discharge on the algal extracellular products has almost no residual effect and the growth rate of algae slightly decreased before three days storage. Hydrogen peroxide was produced by electrical discharge in the μM level and showed a first-order decay. But at such level, the external addition of hydrogen peroxide alone is not likely to cause the residual effect. These results implicated that the growth inhibition of M. aeruginosa was mainly caused by electrical discharge process, and it made the algal cells lose ability to survive, demonstrating the considerable potential of such an alternative process for efficient water purification.     

Identification of target organs of copper nanoparticles with ICP-MS technique

Nanosized copper particles are widely used in fields of lubricants, polymers/plastic, metallic coating and ink. Recently, we found that copper particles in different sizes can lead to different toxicological effects. To clarify the target organs of copper particles of different sizes, the inductively coupled plasma mass spectroscopy (ICP-MS) was employed to evaluate the distribution of copper in different organs of mice after a single dose oral exposure. The results suggest that the main target organs for copper nanoparticles are kidney, liver and blood. Liver is the main damaged organ.     

Production of Raw Starch-Saccharifying Thermostable and Neutral Glucoamylase by the Thermophilic Mold <Emphasis Type="Italic">Thermomucor indicae-seudaticae</Emphasis> in Submerged Fermentation

Among physical and nutritional parameters optimized by “one variable at a time” approach, four cultural variables (sucrose, MgSO₄ ^.7H₂O, inoculum size, and incubation period) significantly affected glucoamylase production. These variables were, therefore, selected for optimization using response surface methodology. The p-values of the coefficients for linear effect of sucrose and inoculum size were less than 0.0001, suggesting them to be the key experimental variables in glucoamylase production. The enzyme production (34 U/ml) attained under optimized conditions (sucrose, 2%; MgSO₄ ^.7H₂O, 0.13%; yeast extract, 0.1%; inoculum size, 5 × 10⁶ spores per 50 ml production medium; incubation time, 48 h; temperature, 40°C; and pH 7.0) was comparable with the value predicted by polynomial model (34.2 U/ml). An over all 3.1-fold higher enzyme titers were attained due to response surface optimization. The experimental model was validated by carrying out glucoamylase production in shake flasks of increasing capacity (0.25–2.0 l) and 22-l laboratory bioreactors (stirred tank and airlift), where the enzyme production was sustainable. Furthermore, the fermentation time was reduced from 48 h in shake flasks to 32 h in bioreactors.     

Freeze-drying for the stabilisation of shellfish toxins in mussel tissue (<Emphasis Type="Italic">Mytilus edulis</Emphasis>) reference materials

Two samples of mussels (Mytilus edulis) were collected from the southwest of Ireland. One sample contained domoic acid, the other sample contained okadaic acid, dinophysistoxin-2 and azaspiracid-1, -2 and -3. Wet and freeze-dried reference materials were prepared from each of the two samples to test for differences in homogeneity, stability and extractability of the analytes in either condition. Wet materials were homogenised, aliquoted and hermetically sealed under argon and subsequently frozen at −80 °C. Dry materials were similarly homogenised but frozen in flat cakes prior to freeze-drying. After grinding, sieving and further homogenisation, the resulting powder was aliquoted and hermetically sealed. Domoic acid materials were characterised using HPLC–UV, while LC–MS was used for the determination of lipophilic toxins. The extractabilities of all phycotoxins studied were comparable for wet and freeze-dried materials once a sonication step had been carried out for reconstitution of the freeze-dried materials prior to extraction. Homogeneity was assessed through replicate analysis of the phycotoxins (n = 10), and was found to be similar for wet and freeze-dried materials, for both hydrophilic and lipophilic toxins. Water contents were determined for both wet and freeze-dried materials, and particle size was determined for the freeze-dried materials. Stability was evaluated isochronously over eight months at four temperatures (−20, +4, +20 and +40 °C). The freeze-dried material containing domoic acid was stable over the whole duration at all temperatures, while in the wet material domoic acid degraded to some extent at all temperatures except −20 °C. In freeze-dried and wet materials containing lipophilic toxins, okadaic acid, dinophysistoxin-2, azaspiracid-1 and azaspiracid-2 were stable over the whole duration at all conditions, while concentrations of azaspiracid-3 changed significantly in both materials at some storage temperatures. Figure Aliquots of freeze-dried and wet mussel tissue reference materials containing the various shellfish toxins examined in the study