基于普鲁士蓝(PB)膜修饰铂电极的葡萄糖传感器的研究

在制备PB膜修饰铂盘电极的基础上,利用修饰电极对过氧化氢的电催化还原特性,得到了性能优良的葡萄糖传感器。作者系统地考察了有关修饰膜制备和测试实验条件对传感器性能的影响,结果表明传感器的最佳工作电位是0．05V,测试溶液的最适PH值为6．5,在选定的工作条件下,传感器的检测灵敏度为80nA/mmol.L^-1,线性范围为0．1－5mmol.L^-1,响应时间为1．5min,寿命在1个月以上,表观米氏常数为21mmol.L^-1。本方法制得的传感器能有效消除抗坏血酸,尿酸的干扰,有望用于血液中葡萄糖的直接测定。     

新颖无限三股螺旋钴配位聚合物{[Co(4,4''''-bipyridine)(4,4''''azobispyridine)_2(NCS)_2]·H_2O}_n的合成、结构和性质的研究(英文)

0IntroductionThereisagreatcurrentinterestforthecrystalengineeringofcoordinationframeworks犤1,2犦,notonlybecauseoftheirpotentialapplicationsaszeolite-likematerialsinmolecularselection,ionexchange,andcatalysis,butalsobecauseoftheirintriguingvarietyofarchitecturesandnewtopologies.Uptonow,themostimportantdrivingforcesincrystalengineeringarecoordinationbondingandhydrogenbondinginteract-ion犤3～5犦.Theuniquedirectionality,strength,andcom-plementaryofnon-covalenthydrogenandcoordinatedbondingplayanimp…     

密度泛函理论研究CO和 O2在NiFeB2/TiO2表面的吸附

 运用密度泛函理论中广义梯度近似的 PW91 方法结合周期平板模型, 研究了 NiFeB2 合金簇在 TiO2(110) 面的吸附模式. 结果表明, NiFeB2 平行吸附在 TiO2 面的 Ot-Ot 位最稳定, 吸附能为 526.4 kJ/mol. 为了探明 NiFeB2/TiO2 是否具有催化氧化 CO 活性, 进一步研究了 CO 和 O2 在 NiFeB2/TiO2 面的共吸附行为. 结果表明, CO 和 O2 以 Eley-Rideal 机理共吸附在 Fe 上时, 易形成碳酸盐, 而以 Langmuir-Hinshelwood 机理共吸附在 Fe 上时, O2 发生分解, 与 Fe, Ni 和 B 形成稳定的六元环.     

吡啶甲酸铑阳离子催化甲醇羰基化反应机理的理论计算

采用有效核近似从头算方法,在HF/LANL2DZ水平下用Berny优化法,对吡啶甲酸铑阳离子催化剂催化甲醇羰基化反应中各基元反应的中间体、过渡态和产物的几何结构进行了优化,过渡态结构通过振动分析进行了确认;计算了各反应的活化位垒.CH_3OH与CO在吡啶甲酸铑阳离子催化剂的作用下反应分4步进行:(1)CH3I氧化加成反应;(2)羰基重排反应:(3)羰基配位反应;(4)CH_3COI还原消除反应.对于各基元反应,CH3I氧化加成反应位垒最高(167.78kJ/mol),是整个反应过程的决速步骤;羰基重排反应和CH_3COI还原消除反应的活化位垒分别为110.67和62.94 kJ/mol,羰基配位反应的位垒为零.与[Rh(CO)_2I_2]-催化剂相比,吡啶甲酸铑阳离子催化剂具有相同的催化机理,但后者催化剂上各步反应的位垒较低.     

KF/Al203催化下由芳醛、丙二腈和2-(1,2-二氢-3-亚茚基)丙二腈或2-(2,3-二氢-4H-亚萘基)丙二腈-步合成芴或菲衍生物

以芳醛、丙二腈、2-(1,2-二氢-3-亚茚基)丙二腈或2-(2,3-二氢-4H-亚萘基)丙二腈为原料,乙醇为溶剂,在80℃下以KF/Al2O3为催化剂合成了一系列芴或菲的衍生物,该方法具有反应条件温和,产率高(72%～88%)和操作简单等优点.产物的结构通过IR,1H NMR和元素分析表征.     

Towards a unified recurrent neural network theory: The uniformly pseudo-projection-anti-monotone net

In the past decades, various neural network models have been developed for modeling the behavior of human brain or performing problem-solving through simulating the behavior of human brain. The recurrent neural networks are the type of neural networks to model or simulate associative memory behavior of human being. A recurrent neural network (RNN) can be generally formalized as a dynamic system associated with two fundamental operators: one is the nonlinear activation operator deduced from the input-output properties of the involved neurons, and the other is the synaptic connections (a matrix) among the neurons. Through carefully examining properties of various activation functions used, we introduce a novel type of monotone operators, the uniformly pseudo-projectionanti-monotone (UPPAM) operators, to unify the various RNN models appeared in the literature. We develop a unified encoding and stability theory for the UPPAM network model when the time is discrete. The established model and theory not only unify but also jointly generalize the most known results of RNNs. The approach has lunched a visible step towards establishment of a unified mathematical theory of recurrent neural networks.     

相场再结晶储能释放模型与显微组织演变的模拟研究

在相场再结晶模型中提出了形式为 f(η_i^k,η_j^k) = E_s (η_i^de )² (1-(η_j^re)²)的冷变形储能项,并应用该模型模拟了 AZ31镁合金的再结晶过程,模拟结果和实验观测结果符合很好.研究表明, 引入储能释放模型可以实现再结晶形核物理过程的模拟; 模拟结果可以把合金在冷变形后退火的过程按照机理分为再结晶和热晶粒 长大两个阶段,模拟得出的理论再结晶时间是实验再结晶时间的2/3. 考察了冷变形应变大小对形变金属的亚晶粒尺寸和储能的影响机理和 试验结果,并将考察结果代入到改进后的再结晶模拟模型, 成功地再现了一个经典实验结果:随预先应变量的增加, 存在临界应变量对应的一个再结晶晶粒尺寸峰值.同时还给出了 这一经典实验结果的理论解释.     

Judd--Ofelt analysis of spectra and experimental evaluation of laser performance of Tm3+ doped Lu2SiO5 crystal

This paper reports that the Tm^3＋：Lu2SiO5 （Tm：LSO） crystal is grown by Czochralski technique. The roomtemperature absorption spectra of Tm：LSO crystal are measured on a b-cut sample with 4 at.% thulium. According to the obtained Judd-Ofelt intensity parameters Ω2=9.3155×10^-20 cm^2, Ω4=8.4103×10^-20 cm^2, Ω6=1.5908×10^-20 cm^2, the fluorescence lifetime is calculated to be 2.03 ms for ^3F4 → ^3H6 transition, and the integrated emission cross section is 5.81×10^-18 cm^2. Room-temperature laser action near 2μm under diode pumping is experimentally evaluated in Tm：LSO. An optical-optical conversion efficiency of 9.1% and a slope efficiency of 16.2% are obtained with continuouswave maximum output power of 0.67 W. The emission wavelengths of Tm：LSO laser are centred around 2.06μm with spectral bandwidth of -13.6 nm.     

The optical properties of MgxZnl-xO thin films

Mg_xZn_1-xO thin films have been prepared on silicon substrates by radio frequency magnetron sputtering at 60℃. The thin films have hexagonal wurtzite single-phase structure and a preferred orientation with the c-axis perpendicular to the substrates. The refractive indices of Mg_xZn_1-xO films are studied at room temperature by spectroscopic ellipsometry over the wavelength range of 400--760\,nm at the incident angle of 70℃. Both absorption coefficients and optical band gaps of Mg_xZn_1-xO films are determined by the transmittance spectra. While Mg content is increasing, the absorption edges of Mg_xZn_1-xO films shift to higher energies and band gaps linearly increase from 3.24.eV at x=0 to 3.90\,eV at x=0.30. These results provide important information for the design and modelling of ZnO/ Mg_xZn_1-xO heterostructure optoelectronic devices.     

Investigation on the scattering effect of ceramic Nd:YAG

This paper investigates the scattering effect of domestic 0.5 at{\%} ceramic Nd:YAG. An effective method has been utilized to measure the scattering and absorption coefficients. An end-pumped continuous wave (CW) Nd:YAG ceramic laser was also demonstrated. A maximum output power of 6.7~W at 1064~nm was obtained at an 808-nm pump power of 32.9~W. Conversion efficiency and slope efficiency have been achieved. This indicates that scattering has an important effect on the optical performance of ceramic Nd:YAG.