Trapping of helium atom by vacancy in tungsten: a density functional theory study

The interaction between helium (He) atom and vacancy defect in tungsten (W) has been investigated by using first-principles simulations. We have obtained that the most stable site for He in tungsten is the substitutional position because He can keep its own electronic structure at this position. In the studied tungsten system, vacancy can act as a trapping center for surrounding He atom with negative trapping energy. The migration behaviors of He atom at tetrahedral interstitial site in W, which can be trapped by vacancy but the final position is almost unchanged comparing with its initial position through structural relaxation, have been predicted and discussed. It is also found that single He atom prefers to go through an octahedral site rather than through a direct path to the vacancy, and the stronger the interaction between He atom and vacancy is, the lower the migration barrier will be.     

High-power 880-nm diode-directly-pumped passively mode-locked Nd:YVO₄ laser at 1342 nm with a semiconductor saturable absorber mirror

A high-power 880-nm diode-directly-pumped passively mode-locked 1342 nm Nd:YVO? laser was demonstrated with a semiconductor saturable absorber mirror (SESAM). The laser mode radii in the laser crystal and on the SESAM were optimized carefully using the ABCD matrix formalism. An average output power of 2.3 W was obtained with a repetition rate of 76 MHz and a pulse width of 29.2 ps under an absorbed pump power of 12.1 W, corresponding to an optical-optical efficiency of 19.0% and a slope efficiency of 23.9%, respectively.     

The Calibration Method of TOFr in the STAR Experiment

a tray of time of flight detector based on mrPc technology took part in the physics run of star both in p+p and d+au collisions in 2003. together with the information from the time Projection chamber(tPc) and the pseudo–vertex Position detector (pvPd) of the star experiment,corrections are done to calibrate the new prototype tof. the intrinsic time resolution of tofr reaches 85ps and it extends the π/K and K/p separation up to 1.6gev/c and 3.0gev/c respectively.     

Leakage current and sub-bandgap photo-response of oxygen-plasma treated GaN Schottky barrier diodes

The effect of oxygen plasma treatment on the performance of GaN Schottky barrier diodes is studied. The GaN surface is intentionally exposed to oxygen plasma generated in an inductively coupled plasma etching system before Schottky metal deposition. The reverse leakage current of the treated diodes is suppressed in low bias range with enhanced diode ideality factor and series resistance. However, in high bias range the treated diodes exhibit higher reverse leakage current and corresponding lower breakdown voltage. The X-ray photoelectron spectroscopy analysis reveals the growth of a thin GaO_x layer on GaN surface during oxygen plasma treatment. Under sub-bandgap light illumination, the plasma-treated diodes show larger photovoltaic response compared with that of untreated diodes, suggesting that additional defect states at GaN surface are induced by the oxygen plasma treatment.     

Superposition of Coherent States in a Mesoscopic Josephson Junction with Dissipation

A mesoscopic Josephson junction with dissipation is considered. Usually the dissipation in the system is described as a consequence of its coupling to a reservoir. By solving the master equation we show that the state of the junction can evolve in a quantum superposition of two coherent states even when the dissipation is present.``     

Optical Properties of a New Two-photon Absorption Dye DEASPI

The two-photon absorption (TPA), TPA-induced frequency up-conversion emission, and two-photon pumped (TPP) frequency up-conversion lasing properties of a new synthesized dye Trans-4-［p-(N,N-diethylamino)styryl］-N-methylpyridinium iodide (DEASPI) were experimentally studied. This new dye has a moderate TPA cross-section of σ2=6.9×10-48 cm4*s/photon at 1064 nm, but exhibits a high lasing efficiency. The overall superradiant lasing conversion efficiency is as high as 10.7% at the pump energy of 2.14 mJ.     

175-W continuous-wave master oscillator power amplifier structure ytterbium-doped all-fiber laser

We report on hundred watts range ytterbium-doped all-fiber laser assembly based on the master oscillator power amplifier structure. It consisted of an oscillator and an amplifier with all-fiber components. And fiber fusion splice made the laser be an integrated fiber system. It generated up to 175.5 W of continuouswave (CW) output power at 1085 nm with more than 75% extraction efficiency in the amplifier when the total coupled pump power into the double clad fiber was 270 W.     

基于近红外光谱技术的石油组分定量分析新方法

针对石油化工产品生产控制和质量检查的需要,为提高测定产品组成的效率,将近红外光谱法作为基础测定方法,以直馏柴油、加氢精制柴油和催化裂化柴油为校正模型的训练样本,测定其中饱和烃、胶质、单环芳烃、双环芳烃、三环芳烃和环烷烃的组成,论述了采用模糊神经网络建立校正模型测定石油化工产品组成的可行性。基于dSPACE硬件平台,用验证样本对模糊神经网络校正模型进行了检验,实验结果表明,该方法响应快、误差小、鲁棒性强,在近红外长波区内,校正样品和验证样品的均方误差小于10-6。该方法可用于石油化工产品的生产工艺研究中。     

绿光抽运准周期光学超晶格产生红光与蓝光的研究

使用一块准周期LiTaO3光学超晶格晶体,利用准相位匹配技术,通过光参变产生与和频两个非线性过程,将一束532nm绿色抽运光转变成666nm红光与443nm蓝光。具体过程为,通过参变过程获得红色信号光和红外闲频光,再通过绿色抽运光与红外闲置光和频获得蓝光,两个过程在同一块准周期光学超晶格中实现,准周期超晶格的两个倒易矢量分别补偿这两个过程中的相位失配。抽运光的脉宽为40ps,重复频率为10Hz,在平均功率为0．5mW时,测得红光和蓝光功率分别0．15mW和16．6μW,转换效率达到34％和3％。这一方法,提供了一种用一块超晶格晶体同时获得三原色输出的有效途径。     

Absorption of short laser pulses on solid targets in the ultrarelativistic regime

We report the first direct measurements of total absorption of short laser pulses on solid targets in the ultrarelativistic regime. The data show an enhanced absorption at intensities above 10(20) W/cm(2), reaching 60% for near-normal incidence and 80%-90% for 45 degrees incidence. Two-dimensional particle-in-cell simulations demonstrate that such high absorption is consistent with both interaction with preplasma and hole boring by the intense laser pulse. A large redshift in the second harmonic indicates a surface recession velocity of 0.035c.