Development of a universal constant rate thermal analysis system for being used with any thermoanalytical instrument

The SCTA method implies to control the temperature in such a way that the reaction rate changes with the time according to a function previously defined by the user. Constant Rate Thermal Analysis (CRTA) is one of the most commonly used SCTA methods and implies achieving a temperature profile at which the reaction rate remains constant all over the process at a value previously selected by the user. This method permits to minimize the influence of heat and mass transfer phenomena on the forward reaction. The scope of this work is to develop a universal CRTA temperature controller that could be adapted to any thermoanalytical device. The thermoanalytical signal is programmed to follow a preset linear trend by means of a conventional controller that at the time controls a second conventional temperature programmer that forces the temperature to change for achieving the trend programmed for the thermoanalytical signal. Examples of the performance of this control system with a Thermobalance and a Thermomechanical Analyser (TMA) are given.     

On the role of heterogeneous and imperfect information in a laboratory financial market

In this paper, we analyze the behavior of a group of heterogeneously informed investors in an laboratory asset market. Our experimental setting is inspired by Huber et al. (On the benefit of information in markets with heterogeneously informed traders: an experimental study, 2004). However, instead of their system of cumulative and exogenously given information structure, we introduce an information market where the traders can buy an imperfect prediction of the future value of the dividend with a maximum anticipation of four periods. The accuracy of the prediction decreases with the chosen time horizon, whereas its price remains constant. Our results confirm a non-strictly monotonic increasing value of the information.     

Air-activated carbons from almond tree pruning: Preparation and characterization

In this work the results obtained in the preparation and characterization of carbons made from almond tree pruning by non-catalytic and catalytic gasification (using K and Co) with air are analyzed and discussed. The main aim was to obtain high quality activated carbons at the lowest possible cost. The variables studied have been the temperature (190-260 °C) and the time (1-10 h) in non-catalytic gasification and the influence of the catalyst type (K and Co, 1 wt.% referred to cation, at 190 °C and 1 h) and the time (1-4 h) in catalytic gasification with Co at 190 °C. The air flow rate used in all the series was 167 cm³ min⁻¹. In non-catalytic gasification the reaction normalized rate versus the conversion degree was maintained until a conversion value of 10% for the experiment made at 260 °C since, at lower temperatures, this rate drops quickly for low conversion values. The N₂ adsorption isotherms for the carbons of this series resemble type I, although there is an increase of N₂ adsorbed volume at relatively high pressures. A temperature rise produced an increase of the carbon porosity and BET specific surface (116-469 m² g⁻¹). The activation time has a positive effect on the N₂ volume adsorbed by the carbons. The isotherms shapes were similar to those previously commented. A concentration equal to 1 wt.% was used to study the influence of the catalyst type. Under the studied experimental conditions, Co drives to a bigger porosity development than K, although with both catalysts a very similar pore size distribution is obtained. The activation time, in the gasifications catalyzed with Co, gives rise to a very important porosity development in the carbons. This produces a strong increase of the carbon specific surface area with very high values in the 4 h experiment, in which a BET specific surface of 959 m² g⁻¹ was obtained.     

Extraction of strontium using an irradiated extraction agent of crown structure

The partition coefficient of strontium upon its extraction from the aqueous solutions of picric acid into chloroform containing DC-18-crown-6, B-15-crown-5 after their exposition to gamma radiation has been studied. A significant decrease of the partition coefficient in the studied range of doses 10–70 kGy was observed. This effect can be attributed to the radiolytic products of chloroform. The radiation destruction as well as dehydrogenation of crown ethers were not observed.     

Mössbauer studies of the re-entrant spin-glass behaviour of Fe–Al alloys

Fe–Al alloys around the concentration of 30 at. % Al present re-entrant spin-glass behaviour at low temperatures. This behaviour is not completely understood and Mössbauer spectroscopy, combined with other experimental techniques, is useful to describe and explain this behaviour. Results show that the Mössbauer spectra coincide with the magnetic behaviour showed in literature and they can be explained as a magnetic cluster system whose magnetic clusters are getting smaller when the temperature is decreasing. When the temperature is reaching to the spin-glass transition at 92 K the spins in the paramagnetic matrix are moving slower and below this transition the spins are completely frozen.     

Advances in constant-velocity Mössbauer instrumentation

A prototype of a programmable constant-velocity scaler is presented. This instrument allows the acquisition of partial Mössbauer spectra in selected energy regions using standard drivers and transducers. It can be fully operated by a remote application, thus data acquisition can be automated. The instrument consists of a programmable counter and a constant-velocity reference. The reference waveform generator is amplitude modulated with 13-bit resolution, and is programmable in a wide range of frequencies and waveforms in order to optimize the performance of the transducer. The counter is compatible with most standard SCA, and is configured as a rate-meter that provides counts per selectable time slice at the programmed velocity. As a demonstration of the instrument applications, a partial Mössbauer spectrum of a natural iron foil was taken. Only positive energies were studied in 512 channels, accumulating 20 s per channel. A line width of 0.20 mm/s was achieved, performing with an efficiency of 80%.     

Fourier Analysis of Semistable Distributions

We consider the generalized convolution powers G _α ^*u (x) of an arbitrary semistable distribution function G _α (x) of exponent α∈(0,2), and prove that for all j, k∈{0,1,2,…} and u>0 the derivatives G _α ^(k,j)(x;u)=∂ ^k+j G _α ^*u (x)/∂ x ^k ∂ u ^j , x∈ℝ, are of bounded variation on the whole real line ℝ. The proof, along with an integral recursion in j, is new even in the special case of stable laws, and the result provides a framework for possible asymptotic expansions in merge theorems from the domain of geometric partial attraction of semistable laws. An erratum to this article can be found at     

Study of the spectrum of cherenkov light

It is pessible to study experimentally Cherenkov light spectra in a liquid scintillation spectrometer with colour filters. Cherenkov light spectra of⁶⁰Co,¹⁹⁸Au,¹¹⁵Cd,¹⁴³Ce,¹⁴⁰La,³²P,⁸⁶Rb,⁷⁶As,⁴²K and an external standard were studied in a Packard 3375 type liquid scintillation spectrometer, using 11 various Kodak Wratten filters. The absorption maxima of the filters ware in the 410–796 nm interval.     

Properties of (InGa)As/GaAs QW (λ ≈ 1.2 µm) facet-coated edge emitting diode laser

In this paper, we report on the design and optical properties of laser diodes with an emission wave-length of ～1170 nm based on an (InGa)As/GaAs double quantum well active layer. The back and front facet of the laser diodes were coated with SiO_x dielectric films that influence the output optical power by enhancing or lowering the facet reflectivity. The measurements show improvement of the facet-coated laser diode properties in the threshold-current-density reduction along with light output power enhancement. Furthermore, a narrow far field pattern and high side mode suppression have been observed.