Combined hollow fiber-based liquid-liquid-liquid microextraction and in-situ differential pulse voltammetry to improve selectivity, sensitivity, and interference elimination in electrochemical analysis

In this paper, a combined hollow fiber-based liquid three-phase microextraction and voltammetric method are applied for the first time as a highly selective and sensitive method of electrochemical analysis. Desipramine, used as a model compound was extracted from 8 mL aqueous solution (donor phase, 0.10 mol L⁻¹ NaOH) through a thin phase of propyl benzoate inside the pores of a polypropylene hollow fiber and finally into a 10 μL acidic acceptor solution inside the hollow fiber. Three microelectrodes designed and constructed for the purposes of this study were placed into the two ends of the hollow fiber inside the acceptor solution, and voltammetric analysis was performed in-situ during the extraction. After 15 min, the final stable signal was used for analytical applications. Under the optimized conditions, an enrichment factor of 301 was achieved and the relative standard deviation (R.S.D.) of the method was 6.2% (n = 5). The calibration curve was obtained in the range of 5-5000 nmol L⁻¹ with a reasonable linearity (R² > 0.988) and the limit of detection (LOD) was found to be 0.8 nmol L⁻¹. Finally, the applicability of the proposed method was evaluated by extraction and determination of desipramine in plasma and urine samples without any dilutions.     

Chemical composition of the essential oil of aerial parts of Haussknechtia elymaitica Boiss. from Iran: a good natural source for trans-asaron

The chemical composition of the essential oil of Haussknechtia elymaitica Boiss. was investigated by capillary GC and GC/MS for the first time. Twelve components were identified which accounting for 99.7% of the oil composition. The major compounds were trans-asarone (59.9%), trans-methyl isoeugenol (22.4%), α-zingiberene (7.96%), β-sesquiphellandrene (4.7%) and β-bisabolene (4.3%). The first three compounds considered as the main components of the essential oil were isolated and characterised by spectroscopic techniques.     

A new triterpene from Salvia xanthocheila Boiss

From the chloroform extract of the aerial parts of Salvia xanthocheila, one new triterpene, together with two known diterpenes, two known flavonoids and a phytosterol was isolated. On the basis of comprehensive spectroscopic analyses, including electron ionisation mass spectra, 1H-NMR, 13C-NMR, 1-D nuclear Overhauser effect, distortionless enchancement by polarisation transfer, H,H correlation spectroscopy, heteronuclear multiple quantum coherence, rotating frame Overhauser enhancement spectroscopy spectra and comparison with spectral data of known compounds, the structure of new compounds was established as 1β,3β-dihydroxy-olean-9(11),12-dienyl (1). The five known compounds (2-6) were 7α-acetoxyroyleanone, taxodione, salvigenin, apigenin-7,4'-dimethyl ether and β-sitosterol, respectively. These known structures are isolated from the aerial parts of S. xanthocheila for the first time.     

A novel homocystine-agarose adsorbent for separation and preconcentration of nickel in table salt and baking soda using factorial design optimization of the experimental conditions

Homocystine was for the first time, chemically linked to a highly cross-linked agarose support (Novarose) to be employed as a chelating adsorbent for preconcentration and AAS determination of nickel in table salt and baking soda. Nickel is quantitatively adsorbed on a small column packed with 0.25 ml of the adsorbent, in a pH range of 5.5–6.5 and simply eluted with 5 ml of a 1 mol l⁻¹ hydrochloric acid solution.

A factorial design was used for optimization of the effects of five different variables on the recovery of nickel. The results indicated that the factors of flow rate and column length, and the interactions between pH and sample volume are significant.

In the optimized conditions, the column could tolerate salt concentrations up to 0.5 mol l⁻¹ and sample volumes beyond 500 ml. Matrix ions of Mg²⁺ and Ca²⁺, with a concentration of 200 mg l⁻¹, and potentially interfering ions of Cd²⁺, Cu²⁺, Zn²⁺ and Mn²⁺, with a concentration of 10 mg l⁻¹, did not have significant effect on the analyte's signal. Preconcentration factors up to 100 and a detection limit of 0.49 μg l⁻¹, corresponding to an enrichment volume of 500 ml, were obtained for the determination of the analyte by flame AAS. Application of the method to the determination of natural and spiked nickel in table salt and baking soda solutions resulted in quantitative recoveries. Direct ETAAS determination of nickel in the same samples was not possible because of a high background observed.     

Effect of Microalgae/Activated Sludge Ratio on Cooperative Treatment of Anaerobic Effluent of Municipal Wastewater

In this work, capability of the green microalga (MA), Chlorella vulgaris, in treating synthetic anaerobic effluent of municipal wastewater was investigated. While pure C. vulgaris (100 % MA) provided maximum soluble chemical oxygen demand (sCOD) and N???NH ₄ ⁺ removal efficiencies of 27 and 72 % respectively, addition of activated sludge (AS) to MA in different mass ratios (91, 80, 66.7, 9 % MA) improved wastewater treatment efficiency. Thus giving maximum sCOD and N???NH ₄ ⁺ removal efficiencies 85 and 86.3 % (for MA/AS?=?10/1), respectively. Utilizing AS without C. vulgaris, for treating the synthetic wastewater resulted in 87 % maximum sCOD and 42 % maximum N???NH ₄ ⁺ removal efficiencies. Furthermore, algal growth and specific growth rates were measured in the systems with microalga as the dominant cellular population. As a result, faster algal growth was observed in mixed systems. Specific growth rate of C. vulgaris was 0.14 (day^?1) in 100 % MA and 0.39 (day^?1) in 80 % MA. Finally, data gathered by online measurement of dissolved oxygen indicate that algae-activated sludge mixture improves photosynthetic activity of examined microalga strain during anaerobic effluent treatment.     

Characterizing colloidal behavior of non-ionic emulsifiers in non-polar solvents using electrical impedance spectroscopy

Colloidal behavior of a widely used non-ionic emulsifier, sorbitan monooleate (Span80), was investigated in non-polar solvents (cyclohexane and xylene) using electrical impedance spectroscopy (EIS). The electrical characteristics of the colloidal mixtures were measured with frequency scans ranging from 1 Hz to 200 kHz. The conductances at low frequencies were found to increase with an increase in Span80 concentration. The source of conductivity for non-polar solvents using non-ionic emulsifiers is usually attributed to ionic impurities either in the Span80 or in the non-polar solvents. The measured electrical characteristics for pure Span80 and pure non-polar solvents revealed that the source of ionic conduction is impurities in Span80. It was confirmed that the ionic impurities in the non-polar solvents are in form of aggregate of ions, ion-pairs, and triple ions which is unaffected with the emulsifier concentration. Analyses using equivalent electrical circuits confirmed that the critical Maxwell-Wagner frequency is 0.6–1.8 Hz for the mixtures. The conductance-concentration profiles for the mixtures at 1 Hz showed transitions from a square root to a linear concentration dependence at the CMC. This indicated that the dissociation model holds below the CMC, while the fluctuation model applies above the CMC. The conductance profiles enabled estimates of the relative hydrophilic core radius and the fraction of charged micelles in both non-polar solvents. Figure

CMC determination of non-ionic emulsifier in non-polar solvents     

Fiber-Optical Parametric Amplification of Sub-Picosecond Pulses for High-Speed Optical Communications

Abstract

This article reviews recent results of amplification of short optical pulses using fiber-optical parametric amplifiers. This includes chirped-pulse amplification of 400 fs pulses, error-free amplification of a 640-Gbit/s optical time-division multiplexed signal with less than a 1-dB power penalty, and all-optical phase-preserving amplitude regeneration of a 640-Gbit/s return-to-zero differential phase-shift keying optical time-division multiplexed signal.     

Synthesis of Functionalized N-Sulfonylamidines from N-Sulfonylketenimines and 2-Aminobenzimidazole

The synthesis of a novel class of N-(1H-benzo[d]imidazol-2-yl)-2-alkyl-N′-sulfonylacetamidines via a copper-catalyzed, three-component coupling reaction of 1H-benzo[d]imidazol-2-amine, sulfonyl azides, and terminal alkynes is described.     

Surveying FDA-approved drugs as new potential inhibitors of N-cadherin protein: a virtual screening approach

Since N-cadherin protein plays a remarkable role in cancer metastasis and tumor growth and progression, finding new effective inhibitors of this protein can be of high importance in cancer treatment. Nevertheless, few molecules have been introduced to inhibit N-cadherin protein to date. In this work, in order to find and present potent inhibitors, 3358 FDA-approved small molecules were docked against N-cadherin protein. All complexes with binding energy ??9 to ??8 kcal/mol were selected for protein-ligand interaction analysis. In the following, Tanimoto coefficient (T_c) was calculated for those molecules that established appropriate interactions with N-cadherin in order to compute the similarity score between them. Afterwards, molecular dynamics simulation and free energy calculations were done to estimate the stability and ability of the chosen ligands in complex with the target protein. Finally, seven small molecules among 3358 FDA-approved were suggested as potential inhibitors of N-cadherin protein.