基于生活实践的工程流体力学启发性教学初探

工程流体力学教学中需要强调理论与实践的有机结合.本文提出基于生活实践案例以问题链形式进行启发性工程流体力学教学.以总流能量方程及水头损失计算教学为例,设计了"自来水水龙头堵住一部分出口后水流喷射的距离和流量如何变化"这一简单生活实践问题,将重要知识点贯穿其中.教学应用效果表明,启发性、开放性的生活实践问题,能够很好地引导学生综合运用理论知识,解决实际问题,同时能够培养学生的生活观察和独立思考能力.     

磁电复合材料的力学实验与理论研究进展

磁电复合材料同时具备铁磁、铁电性,并且具有磁电耦合效应,在新型磁电器件、自旋电子器件、高性能信息存储等领域有着广泛的应用前景,已成为目前功能材料领域新的研究热点.论文对磁电复合材料在力电磁多场耦合下的力学行为研究的最新进展进行总结和回顾.着重介绍磁电复合材料的磁电耦合效应实验以及多场耦合微纳米力学实验仪器的研制和表征方法.同时,也阐述了磁电复合材料在多场耦合本构理论、失效断裂理论以及多尺度计算方面的研究进展.最后,总结已有研究存在的不足,就目前有待解决科学问题的进一步研究提出建议.     

基于能量变化的微尺度金属应变突变准则研究

微尺度金属在塑性变形过程中呈现出显著的应变突变特性.论文以力加载条件下单晶Ni微米柱体和位移加载下Au纳米柱体为对象,探讨应变突变的判定准则与不同特征阶段的判别条件.首先从经典塑性理论Hill稳定性条件出发,分析微柱体变形过程中的动能变化,提出了应变突变发生与结束的判定准则.进一步分析柱体变形过程中的内能变化,结合动能变化的分析结果,给出了微尺度金属不同变形阶段的判别条件.通过与文献中实验与理论结果对比发现,基于动能变化的应变突变判定准则能够判断应变突变的发生与结束,基于能量变化的判别条件可以有效区分微柱体的不同变形阶段.最后对新理论准则的可靠性与适用性进行了讨论.     

可控化学腐蚀法制备碳化硅量子点及其表面修饰

通过可控的化学腐蚀法完成了对碳化硅量子点的制备,而后经超声空化作用及高速层析裁剪获得水相的碳化硅量子点溶液,利用化学偶联法,一步实现了SiC量子点的表面物化特性调控。通过对制备工艺参数调整前后量子点微观形貌、光谱特性的表征,结果表明:腐蚀次数、腐蚀剂组分及腐蚀剂配比是影响碳化硅量子点光致发光效率的主要因素,调整腐蚀次数与腐蚀剂组分的配比,同时加入偶联剂分析纯硫酸,当以V(HF)∶V(HNO₃)∶V(H₂SO₄)=6∶1∶1(体积比)的组分及比例腐蚀球磨后的β-SiC粉体时,制备出的水相碳化硅量子点光致发光相对强度最为理想。同时对碳化硅量子点表面巯基的形成机制与修饰稳定性进行了初步分析。     

昆明物理研究所分子束外延碲镉汞薄膜技术进展

碲镉汞(MCT)自从问世以来一直是高端红外(IR)探测器领域的首选材料,分子束外延碲镉汞技术具有低成本异质外延、材料能带精准调控、原位成结等优势,是第三代红外焦平面陈列(FPA)器件研制的重要手段。本文报道了昆明物理研究所分子束外延(MBE)MCT薄膜技术进展,包括材料结构、晶体质量、表面缺陷、材料均匀性、掺杂浓度等参数优化控制的研究结果。异质衬底、碲锌镉衬底上MCT薄膜尺寸分别为4英寸(10.16 cm)及2.5 cm×2.5 cm,材料EPD值分别在1×10⁶ cm^-2附近及(3～30)×10⁴ cm^-2范围,表面宏观缺陷密度分别在30 cm^-2附近及100～300 cm^-2范围,薄膜质量与国内外先进水平相当。采用分子束外延MCT薄膜实现了2 048×2 048中波红外(MWIR)、2 048×2 048短波甚高分辨率红外(SWIR)焦平面、640×512中短双色红外(S-MWIR)、320×256中中双色红外(M-MWIR)FPA探测器的研制和验证。     

A Novel Aptamer-Imprinted Polymer-Based Electrochemical Biosensor for the Detection of Lead in Aquatic Products

Lead contamination in aquatic products is one of the main hazard factors. The aptasensor is a promising detection method for lead ion (Pb(II)) because of its selectivity, but it is easily affected by pH. The combination of ion-imprinted polymers(IIP) with aptamers may improve their stability in different pH conditions. This paper developed a novel electrochemical biosensor for Pb(II) detection by using aptamer-imprinted polymer as a recognition element. The glassy carbon electrode was modified with gold nanoparticles and aptamers. After the aptamer was induced by Pb(II) to form a G-quadruplex conformation, a chitosan-graphene oxide was electrodeposited and cross-linked with glutaraldehyde to form an imprint layer, improving the stability of the biosensor. Under the optimal experimental conditions, the current signal change (∆I) showed a linear correlation of the content of Pb(II) in the range of 0.1–2.0 μg/mL with a detection limit of 0.0796 μg/mL (S/N = 3). The biosensor also exhibited high selectivity for the determination of Pb(II) in the presence of other interfering metal ion. At the same time, the stability of the imprinted layer made the sensor applicable to the detection environment with a pH of 6.4–8.0. Moreover, the sensor was successfully applied to the detection of Pb(II) in mantis shrimp.     

An unusual autocatalysis with an air-stable Pd complex to promote enantioselective synthesis of Si-stereogenic enynes

Given the powerful potential of chiral-at-silicon chemistry, enantioselective synthesis of Si-stereogenic centers has attracted substantial research interest in recent years. However, the catalytic asymmetric synthesis of Si-stereogenic organosilicon compounds remains an appealing venture and is a challenging subject because of the difficulty in achieving high reactivity and stereoselectivity for “silicon-center” transformations. Herein, we disclose a highly enantioselective palladium-catalyzed hydrosilylation of 1,3-diynes with dihydrosilanes, which enables the facile preparation of Si-stereogenic enynes and an enyne-linked chiral polymer (polyenyne) in good yields and excellent ees (up to >99%) by desymmetrization. The unusual stereoselectivity in this reaction is achieved by precisely controlling the steric hindrance and electronic effect of the newly developed chiral ligands, resulting in a wide range of chiral silanes and a Si-containing polymer bearing a Si-stereogenic center which is otherwise difficult to access. The key to the high enantioselectivity relies on catalyst aggregation-induced non-covalent interaction, which exerts a remarkably positive influence on the Si–H bond activation and enhancement of enantioselectivity, in which the palladium/P-ligand complex was proved to be air-stable and moisture-insensitive in this reaction.

A highly enantioselective palladium-catalyzed hydrosilylation of 1,3-diynes with dihydrosilanes was established for the facile preparation of Si-stereogenic enynes and an enyne-linked chiral polymer (polyenyne) in good yields with excellent ees.     

高功率盒形窗内次级电子倍增效应

以S波段高功率盒型窗为对象,采用Monte Carlo模拟方法对盒型窗内的次级电子倍增效应进行研究,探索次级电子的倍增规律。模拟得到了盒型窗内TE11模和TM11模共同作用下,两种陶瓷窗片表面次级电子倍增活跃的区域随传输功率的变化特点。在低传输功率下,次级电子仅在未镀膜窗片表面被激励,并以双面倍增的方式在金属法兰与镀膜窗片相对应的区域增长;在较高的传输功率下,窗片表面的次级电子将以单面倍增的方式活跃在窗片表面与波导口相对的区域。传输功率的升高使得镀膜窗片表面的次级电子倍增活跃区域转移到矩形波导窄边对应的区域,并加剧了未镀膜窗片表面的局部倍增效应。     

低阻抗大面积二极管的研制

采用高纯石墨环状阴极和有机玻璃绝缘子,研制了一套低阻抗大面积二极管系统。使用理论计算和数值模拟方法对二极管进行优化设计,在保证绝缘要求的同时,尽量优化二极管轴向长度和内外筒距离以减小二极管的回路电感。实验结果表明,优化后的二极管能在200 kV左右的电压上稳定工作,绝缘结构未发生击穿现象;实验中最高输出电压为213 kV,电流为221 kA,特性阻抗约为1 ,电流密度为8 kA/cm2,脉宽(FWHM)为50 ns。