Enantioselective hydrogenation of alkenes with iridium-PHOX catalysts: a kinetic study of anion effects

In the asymmetric hydrogenation of unfunctionalized olefins with cationic iridium-PHOX catalysts, the reaction kinetics and, as a consequence, catalyst activity and productivity depend heavily on the counterion. A strong decrease in the reaction rate is observed in the series [Al[OC(CF3)3]4]- >BArF- >[B(C6F5)4]- >PF6- >BF4- >CF3SO3-. With the first two anions, high rates, turnover frequencies (TOF >5000 h(-1) at 4 degrees C), and turnover numbers (TONs) of 2000-5000 are routinely achieved. The hexafluorophosphate salt reacts with lower rates, although they are still respectable; however, this salt suffers from deactivation during the reaction and extreme water-sensitivity, especially at low catalyst loading. Triflate and tetrafluoroborate almost completely inhibit the catalyst. In contrast to the hexafluorophosphate salt, catalysts with [Al[OC(CF3)3]4]-, BArF-, and [B(C6F5)4]- as counterions do not lose activity during the reaction and remain active, even after all the substrate has been consumed. In addition they are much less sensitive to moisture and, in general, rigorous exclusion of water and oxygen is not necessary. A first-order rate dependence on the hydrogen pressure was determined for the BArF- and the PF6- salts. At low catalyst loading, the rate dependence on catalyst concentration was also first order. The rate dependence on the alkene concentration was strikingly different for the two salts. While the reaction rate observed for the BArF- salt slightly decreased with increasing alkene concentration (rate order -0.2), a rate order of approximately 1 was determined for the corresponding hexafluorophosphate at low alkene concentrations.     

Optical characteristics of atomic force microscopy tips for single-molecule fluorescence applications.

Knowledge of the optical properties of atomic force microscopy (AFM) tips is relevant for the combination of optical and force spectroscopy. The luminescence properties of five commercial AFM tips were characterized using a combination of multiparameter fluorescence detection (MFD) and scanning confocal techniques. These include three Si3N4 tips, one silicon tip, and one high-density carbon (HDC) tip grown on top of a silicon tip. Time-decay histograms of the signal were analyzed to determine the strength of scatter, constant background, and fluorescence in the observed signal. Intensity and anisotropy images with optical resolution down to the diffraction limit were generated. The optical signal recorded from the apex of the Si3N4 tips ranged from 0.7 to 1.9 times the count rates from single Rhodamine 110 molecules under similar illumination conditions. The signal is predominantly composed of scatter and background (>85%), plus a small fluorescence component with lifetimes between 1 and 3 ns. The intensity of the recorded signal fell with increasing distance from the apex, and by 300 nm the signals fell below single-molecule levels for all Si3N4 cantilevers. Silicon cantilevers demonstrated very low count rates relative to single-molecule measurements under all conditions, and virtually no fluorescence. The high-density carbon tips also demonstrated low count rates, but the signal contained a short lifetime fluorescence component (0.7 ns). The intensity of the signals from each of the tips was geometry dependent, demonstrating the highest intensities at the edges and corners. Likewise, the anisotropy of all tip signals was observed to be geometry dependent, with the dependence varying on a case-by-case basis. The implications for using confocal illumination instead of total internal reflection are discussed.     

Ionization of aniline and its N-methyl and N-phenyl substituted derivatives by (free) electron transfer to n-butyl chloride parent radical cations

The electron transfer from aniline and its N-methyl as well as N-phenyl substituted derivatives (N-methylaniline, N,N-dimethylaniline, diphenylamine, triphenylamine) to parent solvent radical cations was studied by electron pulse radiolysis in n-butyl chloride solution. The ionization results in the case of aniline (ArNH2) and the secondary aromatic amines (Ar2NH, Ar(Me)NH) in the synchronous and direct formation of amine radical cations, as well as aminyl radicals, in comparable amounts. Subsequently, ArNH2*+ deprotonates in a delayed reaction with the present nucleophile Cl-, and forms further ArNH*. In contrast, tertiary aromatic amines such as triphenylamine and dimethylaniline yield primarily the corresponding amine radical cations Ar3N*+ or Ar(Me2)N*+, only. The persistent Ar3N*+ forms a charge transfer complex (dimer) with the parent amine molecule, whereas Ar(Me2)N*+ deprotonates to carbon-centered radicals Ar(Me)NCH2*.     

A new route into single-crystalline partially oxidized cobalt compounds: reactions with zintl-type hexaselenodistannate(III) K6Sn2Se6 as mild oxidant

Reactions of K6Sn2Se6 (1) with [Cp*CoCl]2 were investigated in order to probe the stability of the formal +3 oxidation state at Sn and possible ligand properties of heteroatomic zintl-type anion "Sn2Se6(6)- ". From these experiments, we obtained the following compounds that are oxidized to different extent as a result of the reaction with SnIII: [Cp2*Co][Cl2Co(mu2-Cl)2Li(thf)2] (2), [(Cp*Co)3(mu-Se)2] (3), [(Cp*Co)3(mu3-Se)2][Cl2Co(mu2-Cl)2Li(thf)2] (4), and [(Cp*Co)4(mu3-Se)4] (5). These compounds were structurally characterized by single-crystal X-ray diffractometry. It shows that the reaction conditions strongly affect the type and oxidation state of the isolated product. Two of the observed compounds, 3 and 4, are closely related both structurally and electronically; this is discussed and further illustrated by cyclovoltammetric measurements. The choice of the terminal Cp* ligand attached to the transition metal in the reactand complex is assumed to be basically dependent for the alignment of unexpected structural details when compared with known compounds of similar compositions. In conclusion, 1 is observed to act as mild oxidant as well as selenide donor, but is not in the position to keep its Sn-Se framework under the given reaction conditions.     

Production of a calibrant certified reference material for determination of the estrogenic mycotoxin zearalenone

Several previous interlaboratory studies in the field of mycotoxin analysis have revealed considerable problems, apparent as high between-laboratory standard deviations, or rather non-comparable and non-traceable results. A major reason is lack of proper calibrants for external calibration. Public awareness of substances that mimic or interfere with the activity of natural hormones (endocrine disrupters) has led to increased interest in mycotoxins with estrogenic potential, e.g. zearalenone (ZON). During a large-scale standard measurement and testing (SMT) project of the European Commission (EC) dealing with the preparation and certification of reference materials for determination of the mycotoxin ZON in maize, a ZON calibrant in acetonitrile was prepared and intensively checked for purity, homogeneity, and stability. Preparation of the material, study of its homogeneity and stability, and characterisation of the calibrant on the basis of its preparation, with discussion of the results obtained, are described in this paper. The certified value of 9.95 µg mL^–1 for ZON in acetonitrile and its corresponding expanded uncertainty of ±0.30 µg mL^–1 were calculated in compliance with the Guide to the Expression of Uncertainty in Measurement (GUM).     

Bioreductive synthesis of perfluorinated chiral alcohols

Perfluorinated chiral alcohols are interesting building blocks for pharmaceuticals and agrochemicals. Different chiral (R)- and (S)-configured perfluorinated alcohols were produced by asymmetric reduction of the corresponding ketones. Commercially available alcohol dehydrogenases were used as catalyst in combination with different cofactor regenerating systems. High selectivities of >99% were observed in most cases. The results also demonstrate the influence of the CF₃ group on reactivity and enantioselectivity of alcohol dehydrogenases.     

Lifetime measurements and stark mixing of autoionizing Cu I-states

Using a combination of collisional and laser excitation the lifetimes of 17 autoionizing Cu I states in the configurations 3d ⁹ 4s 6s and 3d ⁹ 4s4d were measured. The lifetimes are in the range of 1–50 ps and depend strongly on the coupling properties, the mixing with different configurations, and the radial integrals of the discrete with the continuum states. For the level 3d ⁹ 4s 4d ⁴ S _3/2 the influence of an electric field via Stark mixing of 3d ⁹ 4s 5p ⁴ P _1/2 on the autoionizing rate was investigated. The experimental values are compared with theoretical results which follow from ab initio calculations for the transition probabilities and least square fit values deduced from the experimental positions. Good agreement is found only for theJ=3/2 levels of both configurations 3d ⁹ 4s 4d and 3d ⁹ 4s 6s.     

povel isomers of hexasulfur: Prediction of a stable prism isomer and implications for the thermal reactivity of elemental sulfur

High-level ab initio molecular orbital calculations were employed to explore the potential energy hypersurface of hexasulfur, S(6). Twelve isomeric structures of S(6) have been identified: two unbranched rings (chair and boat), one trigonal prism of D(3h) symmetry, two singly branched rings (S(5)double bondS), three triplet chains, one singlet chain, and three doubly branched rings (Sdouble bondS(4)double bondS). The prism structure is essentially a cluster of three S(2) molecules connected via a six-center pi(*)-pi(*)-pi(*) interaction. It is by 51 kJ mol(-1) less stable than the lowest-energy chair form. The reactions to generate the boat, the prism, and the singly branched isomers from the chair form are predicted to have lower barriers than the ring opening reaction of cyclo-S(6), which requires an activation energy of 149 kJ mol(-1). The prism and singly branched isomers are found to be more reactive species than the chair form and they are potential sources of S(2) in chemical reactions involving elemental sulfur.