Enhancing adsorption of heavy metal ions onto biobased nanofibers from waste pulp residues for application in wastewater treatment

Biobased nanofibers are increasingly considered in purification technologies due to their high mechanical properties, high specific surface area, versatile surface chemistry and natural abundance. In this work, cellulose and chitin nanofibers functionalized with carboxylate entities have been prepared from pulp residue (i.e., a waste product from the pulp and paper production) and crab shells, respectively, by chemically modifying the initial raw materials with the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) mediated oxidation reaction followed by mechanical disintegration. A thorough investigation has first been carried out in order to evaluate the copper(II) adsorption capacity of the oxidized nanofibers. UV spectrophotometry, X-ray photoelectron spectroscopy and wavelength dispersive X-rays analysis have been employed as characterization tools for this purpose. Pristine nanofibers presented a relatively low content of negative charges on their surface thus adsorbing a low amount of copper(II). The copper adsorption capacity of the nanofibers was enhanced due to the oxidation treatment since the carboxylate groups introduced on the nanofibers surface constituted negative sites for electrostatic attraction of copper ions (Cu²⁺). The increase in copper adsorption on the nanofibers correlated both with the pH and carboxylate content and reached maximum values of 135 and 55 mg g^?1 for highly oxidized cellulose and chitin nanofibers, respectively. Furthermore, the metal ions could be easily removed from the contaminated nanofibers through a washing procedure in acidic water. Finally, the adsorption capacity of oxidized cellulose nanofibers for other metal ions, such as nickel(II), chromium(III) and zinc(II), was also demonstrated. We conclude that TEMPO oxidized biobased nanofibers from waste resources represent an inexpensive and efficient alternative to classical sorbents for heavy metal ions removal from contaminated water.     

Ring transformations of heterocyclic compounds. XIV . Ring transformations of pyrylium and thiopyrylium salts with anhydro-bases derived from 1H-benzimidazolium and benzothiazolium salts: An easy access to 2-(2,4,6-triarylphenyl) 1H-benzimidazolium and benzothiazolium derivatives

The preparation of former unknown 2-(2,4,6-triarylphenyl) substituted 1H-benzimidazolium perchlorates 7 and benzothiazolium perchlorates 8 from 2-methyl substituted derivatives 5/6 by a 2,6-[C₅+C] ring transformation of 2,4,6-triarylpyrylium and 2,4,6-triarylthiopyrylium salts 1/9 in the presence of an appropriate base ( 7 : sodium ethoxide, 8 : sodium acetate) is reported. Spectroscopic data of the transformation products and their mode of formation via anhydrobases of the salts 5/6 are discussed.     

Investigation,by single photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS), of the effect of different cigarette-lighting devices on the chemical composition of the first cigarette puff

Soft single-photon ionisation (SPI)–time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff. Lighting devices examined were a Borgwaldt electric lighter, a propane/butane gas lighter, a match, a candle, and the burning zone of another cigarette. To eliminate the effects of the different masses of tobacco burnt by use of the different lighting methods a normalisation procedure was performed which enabled investigation of changes in the chemical patterns of the resulting smoke. When another cigarette was used as the lighting device, elevated levels of ammonia and other nitrogen-containing substances were observed. These are high in the sidestream smoke of the cigarette used for lighting and would be drawn into the mainstream smoke of the cigarette being lit. In contrast, smoke from the cigarette lit by the electric lighter contained slightly higher normalised amounts of isoprene. Lighting the cigarette by use of a candle resulted in larger amounts of substances, e.g. benzene, which most probably originated from thermal decomposition of wax. The composition of the first puff of smoke obtained by use of the three lighting methods with open flames (gas lighter, match, and candle) was usually similar whereas the composition of the smoke produced by use of the electric lighter and the cigarette as the lighter were more unique. The chemical patterns generated by the different lighting devices could, however, be separated by principal-component analyses. Two additional test series were also studied. In the first the cigarette was lit with an electric lighter, then extinguished, the ash was cut off, and the cigarette was re-lit. In the second the cigarette was heated in an oven to 80 °C for 5 min before being lit. These treatments did not result in changes in the chemical composition compared with cigarettes lit in the ordinary way. Figure Time-of-flight mass spectrometry (TOFMS) has been used to investigate the effect of different cigarette-lighting devices on the chemical composition of the mainstream smoke from the first cigarette puff     

The Use of Constituent Spectra and Weighting in Extended Multiplicative Signal Correction in Infrared Spectroscopy

Extended multiplicative signal correction (EMSC) is a widely used preprocessing technique in infrared spectroscopy. EMSC is a model-based method favored for its flexibility and versatility. The model can be extended by adding constituent spectra to explicitly model-known analytes or interferents. This paper addresses the use of constituent spectra and demonstrates common pitfalls. It clarifies the difference between analyte and interferent spectra, and the importance of orthogonality between model spectra. Different normalization approaches are discussed, and the importance of weighting in the EMSC is demonstrated. The paper illustrates how constituent analyte spectra can be estimated, and how they can be used to extract additional information from spectral features. It is shown that the EMSC parameters can be used in both regression tasks and segmentation tasks.     

微波消解-ICP-AES测定鄱阳湖流域沉积物中微量元素

为了研究鄱阳湖沉积物中微量元素近几年来随季节、年度及沿程的变化情况,对2003年和2005年不同季节采集的鄱阳湖流域各采样点底泥进行了ICP-AES测定.结果表明,鄱阳湖沉积物中各元素的含量随着季节和年度变化而发生一定改变,枯水期普遍大于丰水期;南矶山2005年Cu和Pb含量较2003年有所降低;蔡家湾则与南矶山相反;姚公渡2005年Cu含量也较2003年低,Pb含量则高于2003年;与鄱阳湖流域底泥背景值相比,所测几个样点的Cu,Pb,Cr和Zn含量均在一定程度上超标;除大坞河外,其余各样点As含量均在背景值范围内;从饶河到鄱阳湖入湖口处,各元素含量呈逐渐降低趋势.文章提出的研究方法操作简便,效率高,劳动强度低.     

Pseudo‐R 2’s in the ordinal probit model*

This paper presents an analysis of the combining mechanism for status information postulated by the mathematical formulation of the theory of status characteristics and expectation states. Six lemmas on the basic features of the combining mechanism are derived from the formulation and discussed. Further, four theorems that illustrate the implications of the particular combining mechanism for power and prestige orders are presented and proven.