To elevate the potency of sophoridine, phosphoramidate mustard motif was incorporated to D‐ring opened sophoridine scaffold. A series of acyclic aryloxy phosphoramidate mustard functionalized sophoridine derivatives were synthesized and screened for cytostatic activity in a range of different tumor cell lines (S180, H22, K562, MCF‐7, SMMC‐7721, and LoVo). All these compounds were shown to be more sensitive to S180 and H22 cells with IC50 values ranging from 2.10 to 7.21 μM. In addition, all targeted derivatives distinctly are more cytotoxic to cancer cells than normal cell L929. Compounds 8b , 8c , 8d , and 8e displayed moderate tumor suppression without apparent organ toxicity in vivo against mice bearing H22 liver tumors. Their potential binding modes with DNA topoisomerase I complex have also been investigated. 相似文献
MoS2, a typical layered transition-metal dichalcogenide, is promising as an electrode material in supercapacitors. However, its low electrical conductivity could lead to limited capacitance if applied in electrochemical devices. Herein, a new nanostructure composed of hollow carbon–MoS2–carbon was successfully synthesized through an l -cysteine-assisted hydrothermal method by using gibbsite as a template and polydopamine as a carbon precursor. After calcination and etching of the gibbsite template, uniform hollow platelets, which were made of a sandwich-like assembly of partial graphitic carbon and two-dimensional layered MoS2 flakes, were obtained. The platelets showed excellent dispersibility and stability in water, and good electrical conductivity due to carbon provided by the calcination of polydopamine coatings. The hollow nanoplate morphology of the material provided a high specific surface area of 543 m2 g−1, a total pore volume of 0.677 cm3 g−1, and fairly small mesopores (≈5.3 nm). The material was applied in a symmetric supercapacitor and exhibited a specific capacitance of 248 F g−1 (0.12 F cm−2) at a constant current density of 0.1 A g−1; thus suggesting that hollow carbon–MoS2–carbon nanoplates are promising candidate materials for supercapacitors. 相似文献
Molecular or supramolecular level photoluminescence (PL) modulation combining chemical and photonic input/output signals together in an integrated system can provide potential high-density data memorizing and process functions intended for miniaturized devices and machines. Herein, a PL-responsive supramolecular coordination cage has been demonstrated for complex interactions with redox-active guests. PL signals of the cage can be switched and modulated by adding or retracting Fc derivatives or converting TTF into different oxidation states through chemical or photochemical pathways. As a result, reversible or stepwise PL responses are displayed by these host–guest systems because of the occurrence of photoinduced electron-transfer (PET) or fluorescence resonance energy transfer (FREnT) processes, providing unique nanodevice models bearing off/on logic gates or memristor-like sequential memory and Boolean operation functions. 相似文献
With the increasing depletion of fossil energy, the refuse-derived fuel (RDF) as an unavoidable by-product of human activities has been used as an alternative fuel in the precalciner cement kilns. Since the RDF combustion also brings the problems of NOx pollution, it is quite important to find ways to lower the NOx emission during RDF combustion in the precalciner. The pyrolysis characteristics and products of RDF were studied by TG-FTIR and Py-GC/MS. From TG-FITR and Py-GC/MS tests, various carboxylic acids and alkenes formed with NOx released at the RDF pyrolysis process at 200–550 °C. By simulating the temperature (700 °C, 800 °C and 900 °C) and O2 (12%, 14%, 16%, 18% and 21%) environment of the precalciner using a double furnaces reactor, the combustion processes and NOx formation characteristics of RDF combustion were studied. The results showed that the volatile-N was the dominant reactant source of fuel NOx during RDF combustion. The fuel-N conversion and NOx emission yield showed a continuous decreasing trend with temperature increasing from 700 to 900 °C. The fuel-N conversion and NOx emission yield showed a slight increasing trend with the oxygen concentration increase, and the optimum oxygen concentration for RDF combustion was 14%. In this study, the optimum temperature was 900 °C and oxygen concentration was 14% for de-NOx in the precalciner.
Kaolin-filled polypropylene (PP) composites generally form α-crystal due to the effect of kaolin with α-nucleation. The transition from α- to β-nucleation of kaolin has been investigated, and a novel kaolin with β-nucleation (β-kaolin) and kaolin-filled PP composites with high β-crystal content were prepared first. The DSC and WAXD results indicated that the β-kaolin exhibits stronger β-nucleating ability than CaPA as β-nucleating agent for PP crystallization. It is found that the β-crystal content has been influenced little by filler contents in β-kaolin-filled PP composites. Mechanical properties and spherulitic morphology of filled PP composites was characterized. The synergistic effect of filler and β-crystal significantly improved impact strength of kaolin-filled PP composites.
The thioglycolic acid-functionalized CdTe quantum dots (QDs) were synthesized in aqueous solution using safe and low-cost inorganic salts as precursors. Fluorescence resonance energy transfer (FRET) system was constructed between CdTe QDs (donor) and butyl-rhodamine B (BRB) (acceptor) in the presence of cetyltrimethylammonium bromide (CTMAB). CTMAB micelles formed in water reduced the distance between the donor and the acceptor significantly and thus improved the FRET efficiency, which resulted in an obvious fluorescence enhancement of the acceptor. Several factors which impacted the fluorescence spectra of the FRET system were studied. The energy transfer efficiency (E) and the distance (r) between CdTe and BRB were obtained. The feasibility of the prepared FRET system as fluorescence probe for detecting Hg(II) in aqueous solution was demonstrated. At pH 6.60, a linear relationship could be established between the quenched fluorescence intensity of BRB and the concentration of Hg(II) in the range of 0.0625-2.5mumolL(-1). The limit of detection was 20.3nmolL(-1). The developed method was proved to be sensitive and repeatable to detect Hg(II) in a wide range in aqueous solutions. 相似文献
采用6-氨基喹啉基-N-羟基琥珀酰亚氨基甲酸酯(AQC)柱前衍生,紫外、荧光双检测器串接,通过梯度洗脱,在AccQ. Tag C18氨基酸专用分析柱上同时分离并定量测定了啤酒中包括天冬酰胺和谷氨酰胺在内的21种游离氨基酸。方法操作简单,准确可靠,具有较高的灵敏度。21种氨基酸在0.01~1.25 mmol/L内其浓度与响应值呈线性关系,相关系数(r2)不小于0.995,大部分氨基酸的加标回收率为92.5%~100.1%。分析了6种啤酒样品,受酵母对氨基酸的同化规律的影响,不同酿造工艺制造的啤酒其氨基酸组成差异明显。 相似文献
The use of supercritical fluids (SCFs) as solvents has been attracting widespread interest in the research and commercial applications. The study of partial molar volumes of solutes at infinite dilution in the near-critical region is of considerable fundamental importance, as these data reflects the interactions occurring between the solute and the solvent. Experimental measurements of partial molar volumes may be divided into two categories: direct and indirect methods. The direct methods… 相似文献
IntroductionNicotinic acid,whose IUPAC name is 3-pyridine formic acid,also known as Vitamine B5,ismainly used as an additive in food,drink andforage industry[1— 3 ] .In medical practice,it is usedto cure pellagra and other relative vitaminedeficiency illness. It is also an intermediate for thesynthesis of important medicines and chemicalmaterials[1,4] . In China,the demand of nicotinicacid is very big. However,there are manyproblems in the current preparation methods ofnicotinic acid,such… 相似文献
The threat and global concern of energy crises have significantly increased over the last two decades. Because solar light and water are abundant on earth, photocatalytic hydrogen evolution through water splitting has been considered as a promising route to produce green energy. Therefore, semiconductor photocatalysts play a key role in transforming sunlight and water to hydrogen energy. To date, various photocatalysts have been studied. Among them, TiO2 has been extensively investigated because of its non-toxicity, high chemical stability, controllable morphology, and high photocatalytic activity. In particular, 1D TiO2 nanofibers (NFs) have attracted increasing attention as effective photocatalysts because of their unique 1D electron transfer pathway, high adsorption capacity, and high photoinduced electron–hole pair transfer capability. However, TiO2 NFs are considered as an inefficient photocatalyst for the hydrogen evolution reaction (HER) because of their disadvantages such as a large band gap (~3.2 eV) and fast recombination of photoinduced electron–hole pairs. Therefore, the development of a high-performance TiO2 NF photocatalyst is required for efficient solar light conversion. In recent years, several strategies have been explored to improve the photocatalytic activity of TiO2 NFs, including coupling with narrow-bandgap semiconductors (such as ZnIn2S4). Recently, microwave (MW)-assisted synthesis has been considered as an important strategy for the preparation of photocatalyst semiconductors because of its low cost, environment-friendliness, simplicity, and high reaction rate. Herein, to overcome the above-mentioned limiting properties of TiO2 NFs, we report a 2D/1D ZnIn2S4/TiO2 S-scheme heterojunction synthesized through a microwave (MW)-assisted process. Herein, the 2D/1D ZnIn2S4/TiO2 S-scheme heterojunction was constructed rapidly by using in situ 2D ZnIn2S4nanosheets decorated on 1D TiO2 NFs. The loading of ZnIn2S4 nanoplates on the TiO2 NFs could be easily controlled by adjusting the molar ratios of ZnIn2S4 precursors to TiO2 NFs. The photocatalytic activity of the as-prepared samples for water splitting under simulated solar light irradiation was assessed. The experimental results showed that the photocatalytic performance of the ZnIn2S4/TiO2 composites was significantly improved, and the obtained ZnIn2S4/TiO2 composites showed increased optical absorption. Under optimal conditions, the highest HER rate of the ZT-0.5 (molar ratio of ZnIn2S4/TiO2= 0.5) sample was 8774 μmol·g-1·h-1, which is considerably higher than those of pure TiO2 NFs (3312 μmol·g-1·h-1) and ZnIn2S4nanoplates (3114 μmol·g-1·h-1) by factors of 2.7 and 2.8, respectively. Based on the experimental data and Mott-Schottky analysis, a possible mechanism for the formation of the S-scheme heterojunction between ZnIn2S4 and TiO2 was proposed to interpret the enhanced HER activity of the ZnIn2S4/TiO2heterojunctionphotocatalysts.相似文献