Capillary electrochromatography with monolithic stationary phases: 1. Preparation of sulfonated stearyl acrylate monoliths and their electrochromatographic characterization with neutral and charged solutes

A novel monolithic stationary phase having long alkyl chain ligands (C17) was introduced and evaluated in capillary electrochromatography (CEC) of small neutral and charged species. The monolithic stationary phase was prepared by the in situ copolymerization of pentaerythritol diacrylate monostearate (PEDAS) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) in a ternary porogenic solvent consisting of cyclohexanol/ethylene-glycol/water. While AMPS was meant to support the electroosmotic flow (EOF) necessary for transporting the mobile phase through the monolithic capillary, the PEDAS was introduced to provide the nonpolar sites for chromatographic retention. Monolithic columns at various EOF velocities were readily prepared by conveniently adjusting the amount of AMPS in the polymerization solution as well as the composition of the porogenic solvent. The monolithic stationary phases thus obtained exhibited reversed-phase chromatography behavior toward neutral solutes and yielded a relatively strong EOF. For charged solutes (e.g., dansyl amino acids), nonpolar as well as electrostatic interaction/repulsion with the monoliths were observed in addition to electrophoretic migration. Therefore, for charged solutes, selectivity and migration can be readily manipulated by changing various parameters including the nature of the monolith and the composition of the mobile phase (e.g., pH, ionic strength and organic modifier). Ultrafast separation on the time scale of seconds of 17 different charged and neutral pesticides and metabolites were performed using short capillary columns of 8.5 cm x 100 microm ID.     

In vitro evaluation of potential complexation between bovine insulin and bovine serum albumin

The objective of this study was to examine the possible binding of bovine insulin (BI) with bovine serum albumin (BSA) to form a new potential diabetogenic irreversible complex protein. Several preparations of BSA and BI were prepared. Both capillary electrophoresis and spectrophotometric analysis were undertaken to test the possibility of complexation between BI and BSA. HPLC was used to test whether the potential complex of BI and BSA is reversible or irreversible. The optimum deviation between the real and calculated absorbances was observed at a BI/BSA ratio of 2. Moreover, the migration time of BI decreased substantially with increasing ratio of BI to BSA until it became almost constant at equal molar ratio of BI/BSA. While the majority of the 2:1 BI–BSA sample detached during the HPLC analysis, which confirms the reversible character of BI–BSA binding, the HPLC chromatogram also emphasizes the formation of an irreversible complexation between the two proteins. This study provides evidence of the formation of reversible and irreversible new BI–BSA complexes under physiological conditions. This highlights the importance of examining the possible diabetogenicity of BI–BSA complex in genetically susceptible people. Copyright © 2013 John Wiley & Sons, Ltd.     

The anharmonic vibrational potential and relaxation pathways of the amide I and II modes of N-methylacetamide

We investigate the influence of isotopic substitution and solvation of N-methylacetamide (NMA) on anharmonic vibrational coupling and vibrational relaxation of the amide I and amide II modes. Differences in the anharmonic potential of isotopic derivatives of NMA in D2O and DMSO-d6 are quantified by extraction of the anharmonic parameters and the transition dipole moment angles from cross-peaks in the two-dimensional infrared (2D-IR) spectra. To interpret the effects of isotopic substitution and solvent interaction on the anharmonic potential, density functional theory and potential energy distribution calculations are performed. It is shown that the origin of anharmonic variation arises from differing local mode contributions to the normal modes of the NMA isotopologues, particularly in amide II. The time domain manifestation of the coupling is the coherent exchange of excitation between amide modes seen as the quantum beats in femtosecond pump-probes. The biphasic behavior of population relaxation of the pump-probe and 2D-IR experiments can be understood by the rapid exchange of strongly coupled modes within the peptide backbone, followed by picosecond dissipation into weakly coupled modes of the bath.     

Postpolymerization modification of a hydroxy monolith precursor. Part II. Epoxy biphenyl modified poly (hydroxyethyl methacrylate‐co‐pentaerythritol triacrylate) monolithic capillary columns for reversed‐phase capillary electrochromatography based on π–π and hydrophobic interactions

In this second part of the series of investigations involving the postpolymerization modification of a hydroxy monolith (OHM) capillary column, the surface hydroxyl groups were reacted with epoxy biphenyl thus yielding the so‐called Biphenyl OHM capillary column. The modification involved the epoxy ring opening of the 2‐biphenylyl glycidyl ether catalyzed by BF₃ and its subsequent reaction with the hydroxyl groups on the OHM precursor surface. The Biphenyl OHM capillary column thus obtained exhibited the typical reversed phase behavior by primarily hydrophobic interactions vis‐à‐vis the homologous series of alkyl benzenes and in addition by π–π interactions toward nitroalkane homologous series via their π‐electron rich nitro groups. This dual retention mechanism was very distinctly observed with a set of PAH solutes in the sense that the k values of the PAH solutes were comparable to those obtained on a more non polar stationary phase, namely the Epoxy OHM C‐16 reported in the preceding article. Other aromatic solutes showed the dual retention mechanism on the Biphenyl OHM capillary including phenols, anilines derivatives, and phenoxy acid herbicides. The Biphenyl OHM capillary exhibited good reproducibility from run‐to‐run, day‐to‐day, and column‐to‐column.     

Synthesis,characterization, dielectric and rectification properties of PANI/Nd2O3:Al2O3 nanocomposites

Polyaniline–Nd₂O₃:Al₂O₃ nanocomposites were prepared by in situ oxidative polymerization method using different weight percentages of oxide powders. The prepared nanocomposites were characterized by Fourier transform infrared spectroscopy and X‐ray diffraction for molecular and crystal structures. Scanning electron microscopy and transmission electron microscopy images show the tubular structure of polyaniline nanocomposite with embedded metal oxides. The electrical conductivity of the nanocomposites increases with increase in temperature as well as with concentration of Nd₂O₃:Al₂O₃ particles in polyaniline. This is because of the hopping of charge polarons and extended chain length of the nanocomposites as evidenced by the negative thermal coefficient (NTC) characteristic. A high NTC value of 2.67 was found in nanocomposites with 15 wt% of oxide particles. These nanocomposites show low dielectric constant and dielectric loss; the electrical conductivity is higher than 0.3 S/cm as confirmed by Cole–Cole plot that indicates a decrease in both grain resistance and bulk resistance of the nanocomposites. The current–voltage and capacitance–voltage measurements were also carried out. The carrier mobility μ values of pure polyaniline and nanocomposites were found to be 4.27 × 10^?3 and 1.45 × 10^–2 H.M^?1, respectively. A significant enhancement in carrier mobility was observed in comparison with the literature. Copyright © 2016 John Wiley & Sons, Ltd.     

Affinity monolithic capillary columns for glycomics/proteomics: 1. Polymethacrylate monoliths with immobilized lectins for glycoprotein separation by affinity capillary electrochromatography and affinity nano-liquid chromatography in either a single column or columns coupled in series

In this report, microcolumn separation schemes involving monolithic capillary columns with immobilized lectins, and relevant to nanoglycomics/nanoproteomics were introduced. Positive and neutral monoliths based on poly(glycidyl methacrylate-co-ethylene dimethacrylate) were designed for achieving lectin affinity chromatography (LAC) by nano-LC and CEC. The positive monoliths (i.e., monoliths with cationic sites) afforded relatively high permeability in nano-LC but lack predictable EOF magnitude and direction, while neutral monoliths provided a good compromise between reasonable permeability in nano-LC and predictable EOF in CEC. Lectin affinity nano-LC permitted the enrichment of classes of different glycoproteins having similar N-glycans recognized by the immobilized lectin, whereas lectin affinity CEC provided the simultaneous capturing and separation of different glycoproteins due to differences in charge-to-mass ratio. Also, this investigation demonstrated for the first time the coupling of lectin capillary columns in series (i.e., tandem columns) for enhanced separation of glycoproteins by LAC using the CEC modality. Furthermore, in the coupled columns format, glycoforms of a given glycoprotein were readily separated.     

Nonequilibrium bubbles in a flowing langmuir monolayer

We investigate the nonequilibrium behavior of two-dimensional gas bubbles in Langmuir monolayers. A cavitation bubble is induced in liquid expanded phase by locally heating a Langmuir monolayer with an IR-laser. At low IR-laser power the cavitation bubble is immersed in quiescent liquid expanded monolayer. At higher IR-laser power thermo capillary flow around the laser-induced cavitation bubble sets in. The thermo capillary flow is caused by a temperature dependence of the gas/liquid line tension. The slope of the line tension with temperature is determined by measuring the thermo capillary flow velocity. Thermodynamically stable satellite bubbles are generated by increasing the surface area of the monolayer. Those satellite bubbles collide with the cavitation bubble. Upon collision the satellite bubbles either coalesce with the cavitation bubble or slide past the cavitation bubble. Moreover we show that the satellite bubbles can also be produced by the emission from the laser-induced cavitation bubbles.     

Global $$L^q$$-Gevrey Functions and Their Applications

The goal of this paper is to introduce a class of \(C^\infty \) functions derivatives of which satisfy quantitative size estimates. The estimates, called global \(L^q\) Gevrey estimates, first arose in the work of Boggess and Raich ( J. Fourier Anal. Appl. 19:180–224, 2013) when they investigated how to capture a particular type of exponential decay through estimates on the Fourier transform. In the present work, we refine the notion of global \(L^q\)-Gevrey functions and include a discussion of the function theory as well as the relationship to Gevrey classes and known function spaces. In addition, we present explicit examples of global \(L^q\)-Gevrey functions and ways to generate new global \(L^q\)-Gevrey functions from old ones. We conclude with three applications: The first is solving a Carleman-type problem for constructing functions derivatives of which are a given sequence of global \(L^q\)-Gevrey functions. The other two applications concern extensions of a given global \(L^q\)-Gevrey function: the first is constructing an almost analytic extension, and the second is building an approximate solution to a first-order complex vector field coefficients of which are global \(L^q\)-Gevrey functions.