光的折射定律(Snell定律)演示实验装置

基于光子动量在不同媒质分界面上沿分界面方向守恒原理,制作了光的折射定律演示装置.使用该装置可演示入射角连续变化,折射角也自动遵循折射定律相应变化.本文介绍了该演示装置的原理、构造及使用方法.     

高功率脉冲激光对阶跃折射率多模光纤损伤机理

 理论分析和模拟仿真研究了激光点火系统中光纤端面损伤、光纤初始输入段损伤和光纤内部损伤机理。结果显示：端面损伤主要是由光纤端面的杂质和缺陷引起；光纤初始输入段损伤是由光束的初次反射造成光纤局部激光能量密度增大引起的；光纤内部体损伤主要由于激光自聚焦效应引起损伤和光纤受到的意外应力产生微小碎片，吸收激光能量，引起光纤局部损伤。给出了激光点火系统中提高光纤损伤阈值的一般方法，主要包括光纤端面处理、设计合理的激光注入耦合装置。     

Mach-Zehnder Interferometer Based on Coupled Dielectric Pillars

We propose a Mach-Zehnder interferometer （MZI） based on coupled dielectric pillars. It is composed of single-row pillar coupled waveguide modulating arms and three-row pillar waveguide 3 dB couplers. The slow light property and transmission loss of the single-row pillar modulating arm are optimized by the plane wave expansion method. A short 3dB coupler is designed based on the modes transformation in three-row pillar waveguide. Finite difference time domain simulations prove the validity of this MZI and show that it has low insertion loss of 1.1 dB and high extinction ratio of 〉 12 dB.     

原始数据中束流相关本底的分离

束流相关本底处理的不确定性是在BES/BEPC上进行R值测量的主要误差来源之一,提出从原始数据中分离出束流相关样本的新方法, 并把此样本用于调节强子产生器LUARLW的参数,以减小强子探测效率的系统误差, 提高R值的测量精度.     

猝发双脉冲直线感应加速器组元研究

在原单脉冲直线感应加速器（LIA）组元的基础上，利用电缆延时和电缆反射两种方式获得了间隔500～1 000 ns的猝发双脉冲输出。在感应加速腔上进行了双脉冲实验，获得了幅度大于200 kV、前沿小于35 ns、平顶大于60 ns的双脉冲加速电压波形。两种方式中第一个脉冲的前沿和幅度都达到了原单脉冲组元的水平，表明加速腔负载的变化对波形没有明显影响，但由于电缆对波形的损耗，第二个脉冲的幅度和前沿比第一个脉冲略差。可以利用水介质传输线来代替长电缆，减小传输线的长度及其对波形的损耗。两个脉冲间的幅度差异可以通过改变长电缆的阻抗来调节。实验表明，通过这两种猝发双脉冲的产生方式并结合加速腔磁芯的改进，可简单高效地完成原单脉冲LIA的双脉冲改造。     

原子尺度上的异质催化

现实中的催化剂是个相当复杂的系统体系，且为粉末状，限制了多种表面科学表征手段的应用,科学家通过建立简化的催化剂模型，充分利用目前多种有力的科技分析手段，如扫描隧道显微镜（STM）、透射电镜（TEM）、光电子能谱（XPS）、傅里叶变换红外吸收谱（FTIR）、电子能量损失谱（EELS）等，直观地在原子尺度上研究催化反应的机理，从而使得人们能够设计出选择性能更高、催化性能更好的催化剂．     

一种基于OTF稳定性的波前编码相位板优化方法

提出了一种简单的可用于光学系统中子午弧矢方向白光OTF稳定性评价的波前编码相位板参量优化方法.该方法仅以标准偏差来评价OTF在目标景深范围内的稳定性,并且结合自适应模拟退火算法在参量空间内优化得到相位板的最佳参量.使用该方法优化得到的相位板参量,可以大幅度提高光学系统的景深,并且可以获得更为清晰、稳定的成像.对应用波前编码技术前后光学系统的成像性能作了比较,并且考察了优化参量的容差性.     

R值测量中强子事例选择的改进

强子事例的选择和强子探测效率是在BEPC/BES上进行R值测量的两项主要误差来源. 过去实验只选取等于或者大于2叉的强子事例, 因而0叉和1叉事例的丢失将导致强子事例数和强子探测效率的较大误差. 试图提出在R值测量中选取包含1叉强子事例在内的样本, 这将有助于更合理地调节强子事例产生器LUARLW的参数, 减小强子探测效率和R值测量的系统误差.     

Raman and X-Ray Investigation of Pyrope Garnet （Mg0.76Fe0.14Ca0.10）3Al2Si3O12 under High Pressure

The compressional behavlour of natural pyrope garnet is investigated by using angle-dlspersive synchrotron radiation x-ray diffraction and Raman spectroscopy in a diamond anvil cell at room temperature. The pressureinduced phase transition does not occur under given pressure. The equation of state of pyrope garnet is determined under pressure up to 25.3 GPa. The bulk modulus KTO is 199 GPa, with its first pressure derivative K′TO fixed to 4. The Raman spectra of pyrope garnet are studied. A new Raman peak nearly at 743 cm^-1 is observed in a bending vibration of the SiO4 tetrahedra frequency range at pressure of about 28 GPa. We suggest that the new Raman peak results from the lattice distortion of the SiO4 tetrahedra. All the Raman frequencies continuously increase with the increasing pressure. The average pressure derivative of the high frequency modes （650-1000 cm^-1） is larger than that of the low frequency （smaller than 650 cm^-1）. Based on these data, the mode Grǖneisen parameters for pyrope are obtained.     

Photoinduced Resistance Change in an Oxygen-Deficient La 0.9 Sr 0.1 MnO 3-δ Thin Film

Photoinduced resistance change （ △ R/R） in an oxygen-deficient La0.9Sr0.1MnO3-δ thin film is studied. At room temperature, the resistance change of about 30% and response time of about 75 ns are observed under the illumination with a 532nm laser pulse of 7ns and light power of 750mW. It is also found that △ R/R changes with the light power. The phenomena are explained in terms of the photoinduced hole carriers and localized insulator-to-metal transition, which may have potential applications in optoelectronic devices.