Leveraging Material Properties in Fluorescence Anion Sensor Arrays: A General Approach

As the demand for probes suitable for sensor development increases, investigation of approaches that utilize known successful receptors gains in general importance. This study describes a two‐prong approach that can be used as a guide to developing sensors from known receptors. First, the conversion of a simple receptor, calix[4]pyrrole, into a fluorescent probe to establish a ratiometric signal is described. Secondly, the sensors that employ an output from a single ratiometric calix[4]pyrrole probe are fabricated by using poly(ether‐urethane) hydrogel copolymers. These hydrogels are designed to absorb, internalize and transport aqueous electrolytes. A sensor array of ten different poly(ether‐urethane) matrices with varying comonomer proportions were doped with a single probe and were exposed to eight different anions: acetate, benzoate, fluoride, chloride, phosphate, pyrophosphate, hydrogen sulfide, and cyanide, eight urine samples and anti‐inflammatory drugs (NSAIDs). The poly(ether‐urethane) matrices comprise different proportions of anion‐binding urethane moieties and different hydrophilicity given by the ratio between ethylene glycol ether and butylene glycol ether. This diversity in the hydration behavior provides different environment polarity, in which the recognition and self‐assembly processes display enough diverse behavior to allow for unique response of the probe to the analytes. Furthermore, a single probe is shown to recognize eight different aqueous anions and eight urine samples when embedded in ten different polyurethanes in an array that displays 100 % classification accuracy. To demonstrate the potential of the concept for quantitative studies, an estimation of non‐steroidal anti‐inflammatory drugs ibuprofen and diclofenac in water and in saliva was performed. A limit of detection of 0.1 ppm and a dynamic range of 0.1–0.6 and 0.05–60 ppm was observed, respectively. Given the general difficulty of chemosensors to recognize aqueous anions, the fact that one probe recognizes eight different analytes attests to an enormous effect of the polymer environment on the recognition process. This method could be used to generate a variety of sensor arrays for various analyses including species that are difficult to recognize, such as small‐molecule‐ and inorganic anions.     

质子型离子液体N,N-二甲基乙醇胺丙酸盐的密度、粘度及电导率

在283.15-333.15 K温度范围内, 测量了质子型离子液体N,N-二甲基乙醇胺丙酸盐(DMEOAP)的密度、粘度及电导率. 讨论了温度对密度、粘度和电导率等物理化学参数的影响. 通过经验和半经验方程得到了该离子液体的热膨胀系数、分子体积、标准摩尔熵及晶格能等热力学性质参数. 由电导率和密度计算出了该离子液体的摩尔电导率. 利用Vogel-Fulcher-Tamman (VFT)方程, 将测量的动力粘度和电导率对温度拟合, 得到了动力粘度和电导率随温度变化方程式.并通过Walden规则, 建立了粘度与摩尔电导率之间的联系.     

基于ARM11的热力站远程水质监控系统设计

为实现对循环水水质的远程监测,设计并开发了一种基于嵌入式技术的热力站远程水质监测系统的监测终端。监测终端由水质传感器、GPRS模块、通信转换模块及嵌入式开发板组成。嵌入式开发板以ARM11系列的Tiny6410为硬件基础,并嵌入WinCE系统作为软件平台,同时加入SQLite数据库以实现将水质传感器采集到的氯离子、PH值、溶解氧等参数的本地存储、查询及图表显示。最后监测终端通过GPRS模块与数据中心建立无线连接,接收数据中心的配置命令,并将现场测得数据发送到远端数据中心。调试结果表明：远程监测终端实现了循环水水质远程监测的功能要求,对于实现水质自动化监测具有一定的理论意义和实用价值。     

分子动力学模拟研究点突变(Met108→Leu108)对树胶醛糖结合蛋白与配体作用的影响

为了研究点突变(Met108→Leu108)对树胶醛糖结合蛋白(ABP)与配体结合能力的影响,对ABP、ABP结合树胶醛糖复合物及ABP结合半乳糖复合物以及它们各自的突变体分别进行60 ns的分子动力学模拟.模拟结果表明,108号残基突变前后,电子等排体的两个氨基酸残基,使蛋白与配体间的范德华相互作用发生明显变化,同时导致蛋白的内部运动也发生变化,进而影响蛋白与配体的相互作用.进一步分析表明,突变前后的蛋白构象变化都趋向于两个结构域张开,而与配体的结合可减缓张开程度.     

晶化时间对ZSM-5/MCM-48复合分子筛结构及MTG反应性能的影响

采用两步晶化法制备ZSM-5/MCM-48微介孔复合分子筛,通过调变前驱体溶胶的晶化时间获得不同结构的ZSM-5/MCM-48基分子筛催化剂。采用XRD、N₂-吸附、SEM、TEM、FT-IR和Py-FTIR等手段进行表征,结果表明,前驱体溶胶的晶化时间对ZSM-5/MCM-48复合分子筛的结构和表面酸性产生重要的影响,而特定结构的复合分子筛基催化剂可以显著改变甲醇制汽油（MTG）反应的产物分布,与ZSM-5基催化剂相比显著降低了油品中芳烃和均四甲苯的含量。阐明了其催化作用机制是由于介孔结构的MCM-48对微孔结构的ZSM-5界面或表面的修饰作用。     

Fluorocarbon and Hydrocarbon N‐Heterocyclic (C5–C7) Imidazole‐Based Liquid Crystals

By using three synthetic protocols, a series of fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based liquid crystals (LCs) and related imidazolium‐based ionic liquid crystals (ILCs) have been prepared. The ring size of the N‐heterocycle and the length of the N‐terminal chain (on the imidazolium unit in the ILCs) were modified, and the influence of these structural parameters on liquid‐crystal phases was investigated by means of polarizing optical microscopy (POM), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). These new ILCs exhibit a disordered smectic phase (SmA), good thermal stabilities, a broad smectic phase range, a high dipole moment, relatively low melting points, but high clearing points and strong emission fluorescence relative to imidazole‐based LCs. These encouraging results have led us to believe these fluorocarbon and hydrocarbon N‐heterocyclic imidazole‐based LCs and related imidazolium‐based ILCs could be used as new liquid‐crystalline materials.     

三嗪基多孔有机材料的合成及在固相微萃取应用中的研究进展

三嗪基多孔有机材料(TPOPs)具有较大的比表面积、可调的孔道结构、较高的热和化学稳定性、丰富的π键体系等诸多优点,目前被广泛应用于气体储存、催化、能源转化和吸附等诸多领域。基于TPOPs的固相微萃取(SPME)技术近年来引起了人们的极大兴趣,成为样品前处理技术领域的研究热点之一。该文简要地综述了近年来TPOPs的合成方法及其在固相微萃取领域的应用与发展,并对该领域研究进行了展望。     

基于HRTEM和Raman分析定向多壁碳纳米管阵列的生长机理

以二茂铁、二甲苯为前驱体,石英为衬底,在850 oC的管式炉内采用化学气相沉积法制备出了定向碳纳米管阵列. 高分辨透射电子显微镜和拉曼光谱的结果表明：碳纳米管阵列具有良好的定向性和多壁管状结构,石墨化程度高,并且只在表面存在少量单壁碳纳米管.定向多壁碳纳米管阵列的生长模式为“底部”生长模式,即在生长的初期,当催化剂颗粒较小时,析出的碳原子生成了单壁碳纳米管或与其性质类似的多壁碳纳米管(一般层数小于5层);催化剂颗粒逐渐长大后,大量的碳原子析出后生成了普通的多壁碳纳米管,从而形成了单壁碳纳米管只存在于碳纳米管阵列膜表面和多层碳纳米管膜表面与界面的现象.     

Wide-band circular polarization-keeping reflection mediated by metasurface

In this paper,we show that circular polarization-keeping reflection can be achieved using reflective metasurfaces.The underlying physical mechanism of the polarization-keeping reflection is analyzed using a reflection matrix.A wideband circular polarization-keeping reflector is demonstrated using N-shaped resonators.Both the simulation and experiment results show that the polarization-keeping reflection can be achieved with a high efficiency larger than 98%over the frequency range from 9.2 GHz to 17.7 GHz for both incident left-and right-handed circularly polarized waves.Under oblique incidence,the bandwidth increases as the incident angle varies from 0°to 80°. Moreover,the co-polarization reflection is independent of the incident azimuth angles.     

Cellulosic nanocomposite membranes from hydroxypropyl cellulose reinforced by cellulose nanocrystals

Cellulosic nanocomposite membranes were prepared by incorporation of cellulose nanocrystals (CNCs) into a hydroxypropyl cellulose (HPC) matrix using a mixing/evaporation technique. CNCs were obtained from filter paper using the sulfuric acid hydrolysis method with the aid of ultrasonication. The relationship between the microstructure and mechanical properties of the CNCs/HPC nanocomposite membranes was studied. Scanning electron microscopy showed that the CNCs were well dispersed in the HPC matrix, and the fracture surface demonstrated a fibrous characteristic. With increasing CNCs content, the tensile strength and Young’s modulus of the CNCs/HPC nanocomposite membranes gradually increased. At 5 wt% content of CNCs, the strength was increased by 525 % and the Young’s modulus by 124 % compared with pure HPC membrane. Moreover, the effect of the phase change of HPC on the mechanical properties of the CNCs_5wt%/HPC nanocomposite membranes and the corresponding mechanism were also studied.