多结超导环在外磁场中的行为

分析和计算了双结超导环在无偏置电流时的磁通、环流、自由能与外磁场的关系.发现双结环与单结环在磁场中的行为有所不同.当两个结的Ic相等时，双结环在1＜β=2πLIcΦ0＜2时，若无偏置电流，总磁通Φ、环流I与外磁通Φe的关系仍然是非回滞的曲线.仅当β≥2时，曲线才出现回滞.另外双结环有两支解，并且每支解的周期为2Φ0. 关键词： 双结环 双支解 2Φ0周期 回滞     

Positive Solution of Multi-Point Boundary Value Problems for the One-Dimensional p-Laplacian with Singularities

In this paper, we obtain positive solution to the following multi-point singular boundary value problem with p-Laplacian operator,{（ φp（u＇））＇＋q（t）f（t,u,u＇）=0,0〈t〈1,u（0）=∑i=1^nαiu（ξi）,u＇（1）=∑i=1^nβiu＇（ξi）,whereφp（s）=｜s｜^p-2s,p≥2;ξi∈（0,1）（i=1,2,…,n）,0≤αi,βi〈1（i=1,2,…n）,0≤∑i=1^nαi,∑i=1^nβi〈1,and q（t） may be singular at t=0,1,f（t,u,u＇）may be singular at u＇=0     

两段级联掺铒光纤放大器的优化研究

基于Giles模型,研究了980 nm和1480 nm泵浦的两段级联掺铒光纤放大器(EDFA)的设计,得出了掺铒光纤(EDF)的最佳长度和光隔离器的最佳位置随泵浦功率和信号功率的变化关系.比较980 nm和1480 nm泵浦的两段级联EDFA,可以发现,前者的最佳EDF长度短,而光隔离器最佳位置距EDFA输入端远.     

Preparation of highly ordered mesoporous AlSBA-15-SO3H hybrid material for the catalytic synthesis of chalcone under solvent-free condition

Single-step preparation of SBA-15 materials functionalized with both propylsulfonic acid groups and aluminum species (AlSBA-15-SO₃H) was carried out by hydrothermal treatment of a mixture of aluminum isopropoxide, 3-mercaptopropyltriethoxysilane, tetraethoxysilane, and triblock copolymer surfactant. At Si/Al molar ratio of 11-96, the materials exhibited well-ordered hexagonally arranged mesopores with pore diameter of ca. 9 nm, BET surface area of 546.9-666.0 m² g⁻¹, and pore volume of 0.82-1.03 cm³ g⁻¹. As-prepared AlSBA-15-SO₃H was successfully used in the Claisen-Schmidt condensation reaction of benzaldehyde with acetophenone to produce chalcone under solvent-free condition, and the influence of the reaction parameters including temperatures, molar ratios of BZD to APN, and aluminum loadings were considered during the chalcone synthesis procedure. It showed that AlSBA-15-SO₃H exhibited significantly high catalytic activity and selectivity, outperforming the reference catalysts such as sulfuric acid, ZSM-5, and acidic MCM-49. In addition, the catalytic stability and regeneration of AlSBA-15-SO₃H was studied.     

Synthesis of micro- or nano-crystalline diamond films on WC-Co substrates with various pretreatments by hot filament chemical vapor deposition

Diamond films deposited on tungsten carbide can lead to major improvements in the life and performance of cutting tools. However, deposition of diamond onto cemented tungsten carbide (WC-Co) is problematic due to the cobalt binder in the WC. This binder provides additional toughness to the tool but results in poor adhesion and low nucleation density of any diamond film. A two-step chemical etching pretreatment (Murakami reagent and Caro acid, (MC)-pretreatment) and a boronization pretreatment have both been used extensively to improve adhesion of CVD diamond film on WC-Co substrates. Here we discuss the applicability of MC-pretreatment for a range of Co-containing WC-Co substrates, and demonstrate a controlled synthesis process based on liquid boronizing pretreatment for obtaining smooth and dense micro- or nano-crystalline diamond films on high Co-containing WC-Co substrates. Substrate treatments and deposition parameters were found to have major influences on the smoothness, structure and quality of the diamond films. The best quality diamond films were achieved under conditions of relatively high substrate temperature (T_s) and the best adhesion was achieved at T_s = 800 °C.     

Crystallization of 21.25Gd2O3-63.75MoO3-15B2O3 glass induced by femtosecond laser at the repetition rate of 250 kHz

We report the formation of β′-Gd₂(MoO₄)₃ (GMO) crystal on the surface of the 21.25Gd₂O₃-63.75MoO₃-15B₂O₃ glass, induced by 250 kHz, 800 nm femtosecond laser irradiation. The morphology of the modified region in the glass was clearly examined by scanning electron microscopy (SEM). By micro-Raman spectra, the laser-induced crystals were confirmed to be GMO phases and it is found that these crystals have a strong dependence on the number and power of the femtosecond laser pulses. When the irradiation laser power was 900 mW, not only the Raman peaks of GMO crystals but also some new peaks at 214 cm⁻¹, 240 cm⁻¹, 466 cm⁻¹, 664 cm⁻¹ and 994 cm⁻¹which belong to the MoO₃ crystals were observed. The possible mechanisms are proposed to explain these phenomena.     

聚合物泡沫结构及密度分布的相衬CT表征技术

阐述了利用X射线相衬成像技术研究高分子有机泡沫材料微观结构的原理及方法,理论分析及实验结果表明,X射线相衬成像方法可以在相当大的程度上提高低Z聚合物泡沫材料的成像衬度。将相衬成像技术与计算机层析成像技术相结合,获得了泡沫样品的3维骨架结构分布,同时,提出利用统计切片骨架“粒子”质心分布的方法来表征其密度分布均匀性。结果说明,该方法能够在微观层次上实现对泡沫样品3维密度分布的完备表征。     

相对论磁控管的实验研究

简要分析了相３对论磁控管的主要特点与问题，编制了谐振系统数值计算程序，通过数值计算与冷测，对不同阴极尺寸与输出结构的磁控管进行了研究，清晰地描述了磁控管的振荡模式与简并现象。制作了Ａ６型相对论磁控管并进行了热测实验，研究了输出功率与工作磁场的关系，经过大量优化工作，在Ｓ波段获得了３８０ＭＷ的微波辐射。     

ZnS:Tm薄膜电致发光的激发过程

利用电子束蒸发方法制得ITO-Y2O3-ZnS:Tm3+-Y2O3-Al结构的薄膜可以得到蓝色电致发光.本文首次报导了ZnS:Tm3+薄膜与ZnS:Er3+、ZnS:Tb3+薄膜电致发光的激发过程有所不同.Tm3+离子的激发可以通过某些杂质中心到Tm3+离子的能量传递来实现.