Concurrent Determination of Tigecycline,Tetracyclines and Their 4-Epimer Derivatives in Chicken Muscle Isolated from a Reversed-Phase Chromatography System Using Tandem Mass Spectrometry

A quantitative and qualitative method using a high-performance liquid chromatography–tandem mass spectrometry (HPLC–MS/MS) detection approach was developed and validated for the analysis of tigecycline, four tetracyclines and their three 4-epimer derivatives in chicken muscle. Samples were extracted repeatedly with 0.1 mol/L Na₂EDTA–McIlvaine buffer solution. After vortexing, centrifugation, solid-phase extraction, evaporation and reconstitution, the aliquots were separated using a C8 reversed-phase column (50 mm × 2.1 mm, 5 µm) with a binary solvent system consisting of methanol and 0.01 mol/L trichloroacetic acid aqueous solution. The typical validation parameters were evaluated in accordance with the acceptance criteria detailed in the guidelines of the EU Commission Decision 2002/657/EC and the U.S. Food and Drug Administration Bioanalytical Method Validation 05/24/18. The matrix-matched calibration curve was linear over the concentration range from the limit of quantitation (LOQ) to 400 μg/kg for doxycycline, and the calibration graphs for tetracycline, chlortetracycline, oxytetracycline, their 4-epimer derivatives and tigecycline showed a good linear relationship within the concentration range from the LOQ to 200 μg/kg. The limits of detection (LODs) for the eight targets were in the range of 0.06 to 0.09 μg/kg, and the recoveries from the fortified blank samples were in the range of 89% to 98%. The within-run precision and between-run precision, which were expressed as the relative standard deviations, were less than 5.0% and 6.9%, respectively. The applicability was successfully demonstrated through the determination of residues in 72 commercial chicken samples purchased from different sources. This approach provides a novel option for the detection of residues in animal-derived food safety monitoring.     

Chemical Composition and In Vitro Antioxidant Activity of Sida rhombifolia L. Volatile Organic Compounds

In the current study, the phytochemical constituents of volatile organic compounds (VOCs) obtained from Sida rhombifolia L. were identified by GC-FID and GC-MS analysis. A total of 73 volatile organic compounds were identified. The major components of S. rhombifolia VOCs were identified as palmitic acid (21.56%), phytol (7.02%), 6,10,14-trimethyl-2-pentadecanone (6.30%), oleic acid (5.48%), 2-pentyl-furan (5.23%), and linoleic acid (3.21%). The VOCs are rich in fatty acids (32.50%), olefine aldehyde (9.59%), ketone (9.41%), enol (9.02%), aldehyde (8.63%), and ketene (6.41%). The antioxidant capacity of S. rhombifolia VOCs was determined by 2,2-diphenyl-1-picryl-hydrazyl-hydrate (DPPH), 2,2-azinobis-(3-ethylbenzothiazolin-6-sulfonic acid) diammonium salt (ABTS), and ferric reducing/antioxidant power (FRAP) methods with butylated hydroxytoluene (BHT) and Trolox as standard. The VOCs showed dose-dependent antioxidant activity with IC50 (50% inhibitory concentration) values of 5.48 ± 0.024 and 1.47 ± 0.012 mg/mL for DPPH and ABTS assays, respectively. FRAP antioxidant capacity was 83.10 ± 1.66 mM/g. The results show that the VOCs distilled from S. rhombifolia have a moderate antioxidant property that can be utilized as a natural botanical supplement or an antioxidant.     

Simultaneous Extraction and Determination of Characteristic Steroidal Saponins and Homoisoflavonoids in Zhejiang Ophiopogon japonicus

Zhejiang Ophiopogon japonicus (ZOJ) is a specific variety of Ophiopogon japonicus with characteristic steroidal saponins and homoisoflavonoids, which are also main pharmacodynamic constituents with clinical effects, including curing inflammation and cardiovascular diseases. However, few analysis methods were applied to simultaneously and quantitatively determine two kinds of its constituents, and hazardous organic solvents are mostly used for extraction. In this study, a new validated simultaneous extraction and determination method for four characteristic steroidal saponins and homoisoflavonoids in ZOJ was established by ionic liquid–ultrasonic extraction (IL-UAE) combined with HPLC-DAD-ELSD analysis, which can be used for the quality control of ZOJ. Chromatographic separation was performed with a DAD wavelength at 296 nm, and the ELSD parameters of the drift tube temperature (DTT), atomizer temperature (AT), and nitrogen gas pressure (NGP) were set at 20% heating power, 70 °C, and 25 psi, respectively. The optimal IL-UAE conditions were 1 mol/L [Bmim]CF₃SO₃ aqueous solution, a liquid–material ratio of 40 mL/g, and an ultrasonic time of 60 min. The proposed method is reliable, reproducible, and accurate, which were verified with real sample assays. Consequently, this work will be helpful for the quality control of ZOJ. It can also present a promising reference for the simultaneous extraction and determination of different kinds of constituents in other medicinal plants.     

Efficient Preparation of Small-Sized Transition Metal Dichalcogenide Nanosheets by Polymer-Assisted Ball Milling

Two-dimensional (2D) transition metal dichalcogenide nanosheets (TMDC NSs) have attracted growing interest due to their unique structure and properties. Although various methods have been developed to prepare TMDC NSs, there is still a great need for a novel strategy combining simplicity, generality, and high efficiency. In this study, we developed a novel polymer-assisted ball milling method for the efficient preparation of TMDC NSs with small sizes. The use of polymers can enhance the interaction of milling balls and TMDC materials, facilitate the exfoliation process, and prevent the exfoliated nanosheets from aggregating. The WSe₂ NSs prepared by carboxymethyl cellulose sodium (CMC)-assisted ball milling have small lateral sizes (8~40 nm) with a high yield (~60%). The influence of the experimental conditions (polymer, milling time, and rotation speed) on the size and yield of the nanosheets was studied. Moreover, the present approach is also effective in producing other TMDC NSs, such as MoS₂, WS₂, and MoSe₂. This study demonstrates that polymer-assisted ball milling is a simple, general, and effective method for the preparation of small-sized TMDC NSs.     

Building Polymeric Framework Layer for Stable Solid Electrolyte Interphase on Natural Graphite Anode

The overall electrochemical performance of natural graphite is intimately associated with the solid electrolyte interphase (SEI) layer developed on its surface. To suppress the interfacial electrolyte decomposition reactions and the high irreversible capacity loss relating to the SEI formation on a natural graphite (NG) surface, we propose a new design of the artificial SEI by the functional molecular cross-linking framework layer, which was synthesized by grafting acrylic acid (AA) and N,N′−methylenebisacrylamide (MBAA) via an in situ polymerization reaction. The functional polymeric framework constructs a robust covalent bonding onto the NG surface with —COOH and facilitates Li⁺ conduction owing to the effect of the —CONH group, contributing to forming an SEI layer of excellent stability, flexibility, and compactness. From all the benefits, the initial coulombic efficiency, rate performance, and cycling performance of the graphite anode are remarkably improved. In addition, the full cell using the LiNi_0.5Co_0.2Mn_0.3O₂ cathode against the modified NG anode exhibits much-prolonged cycle life with a capacity retention of 82.75% after 500 cycles, significantly higher than the cell using the pristine NG anode. The mechanisms relating to the artificial SEI growth on the graphite surface were analyzed. This strategy provides an efficient and feasible approach to the surface optimization for the NG anode in LIBs.     

Ultrathin Two-Dimensional Fe–Co Bimetallic Oxide Nanosheets for Separator Modification of Lithium–Sulfur Batteries

The shuttle effect is understood to be the most significant issue that needs to be solved to improve the performance of lithium–sulfur batteries. In this study, ultrathin two-dimensional Fe–Co bimetallic oxide nanosheets were prepared using graphene as a template, which could rapidly catalyze the conversion of polysulfides and inhibit the shuttle effect. Additionally, such ultrathin nanostructures based on graphene provided sufficient active sites and fast diffusion pathways for lithium ions. Taking into account the aforementioned benefits, the ultrathin two-dimensional Fe–Co bimetallic oxide nanosheets modified separator assembled lithium–sulfur batteries delivered an incredible capacity of 1044.2 mAh g⁻¹ at 1 C and retained an excellent reversible capacity of 859.4 mAh g⁻¹ after 100 cycles. Even under high loading, it still achieved high area capacity and good cycle stability (92.6% capacity retention).     

Surface differences of oxide nanocrystals determined by geometry and exogenously coordinated water molecules

Determining the different surfaces of oxide nanocrystals is key in developing structure–property relations. In many cases, only surface geometry is considered while ignoring the influence of surroundings, such as ubiquitous water on the surface. Here we apply ¹⁷O solid-state NMR spectroscopy to explore the facet differences of morphology-controlled ceria nanocrystals considering both geometry and water adsorption. Tri-coordinated oxygen ions at the 1^st layer of ceria (111), (110), and (100) facets exhibit distinct ¹⁷O NMR shifts at dry surfaces while these ¹⁷O NMR parameters vary in the presence of water, indicating its non-negligible effects on the oxide surface. Thus, the interaction between water and oxide surfaces and its impact on the chemical environment should be considered in future studies, and solid-state NMR spectroscopy is a sensitive approach for obtaining such information. The work provides new insights into elucidating the surface chemistry of oxide nanomaterials.

Both atomic geometry and the influence of surroundings (e.g., exogenously coordinated water) are key issues for determining the chemical environment of oxide surfaces, whereas the latter is usually ignored and should be considered in future studies.     

Syntheses,homeomorphic and configurational isomerizations,and structures of macrocyclic aliphatic dibridgehead diphosphines; molecules that turn themselves inside out

The diphosphine complexes cis- or trans- PtCl₂(P((CH₂)_n)₃P ) (n = b/12, c/14, d/16, e/18) are demetalated by MC X nucleophiles to give the title compounds (P((CH₂)_n)₃)P (3b–e, 91–71%). These “empty cages” react with PdCl₂ or PtCl₂ sources to afford trans- MCl₂(P((CH₂)_n)₃P ). Low temperature ³¹P NMR spectra of 3b and c show two rapidly equilibrating species (3b, 86 : 14; 3c, 97 : 3), assigned based upon computational data to in,in (major) and out,out isomers. These interconvert by homeomorphic isomerizations, akin to turning articles of clothing inside out (3b/c: ΔH^‡ 7.3/8.2 kcal mol⁻¹, ΔS^‡ −19.4/−11.8 eu, minor to major). At 150 °C, 3b, c, e epimerize to (60–51) : (40–49) mixtures of (in,in/out,out) : in,out isomers, which are separated via the bis(borane) adducts 3b, c, e·2BH₃. The configurational stabilities of in,out-3b, c, e preclude phosphorus inversion in the interconversion of in,in and out,out isomers. Low temperature ³¹P NMR spectra of in,out-3b, c reveal degenerate in,out/out,in homeomorphic isomerizations (ΔG^‡_Tc 12.1, 8.5 kcal mol⁻¹). When (in,in/out,out)-3b, c, e are crystallized, out,out isomers are obtained, despite the preference for in,in isomers in solution. The lattice structures are analyzed, and the D₃ symmetry of out,out-3c enables a particularly favorable packing motif. Similarly, (in,in/out,out)-3c, e·2BH₃ crystallize in out,out conformations, the former with a cycloalkane solvent guest inside.

It’s not a magic trick. Molecules can turn themselves inside out, just like articles of clothing or other familiar household objects. This behavior is demonstrated for the title compounds through a combination of synthesis, rate, and NMR studies.