Structural and electrochemical properties of high-capacity Ml-Mg-Ni-based hydrogen storage alloys

The Ml-Mg-Ni-based (Ml = La-rich mixed lanthanide) hydrogen storage alloy Ml_0.88Mg_0.12Ni_3.0-Mn_0.10Co_0.55Al_0.10 was prepared by inductive melting. The micro-structure was analyzed by XRD and SEM. The alloy consists mainly of CaCu₅-type phase, Ce₂Ni₇-type phase and Pr₅Co₁₉-type phase. The electrochemical measurements show that the maximum discharge capacity is 386 mAh/g, 16.3% higher than that of the commercial AB₅-type alloy (332 mAh/g). At discharge current density of 1 100 mA/g, high rate dischargeability is 62%, while that of the AB5-type alloy is only 45%. The discharge capacity decreases to 315 mAh/g after 300 charge/ discharge cycles, 81.5% of the maximum discharge capacity. __________ Translated from Journal of Xi’an Jiao Tong University, 2008, 42(3) (in Chinese)     

Preparation and characterization of SiO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–Na<Subscript>2</Subscript>O glass coated cBN abrasive particles via sol–gel route

SiO₂–Al₂O₃–Na₂O glass coated cubic boron nitride (cBN) abrasive particles were prepared by sol–gel technique. The results indicated that SiO₂–Al₂O₃–Na₂O glass was excellent material for oxidation protection of cBN abrasive grains because coefficient of thermal expansion of this glass closely matched that of cBN materials. The single particle compressive strength and impact toughness of this glass coated cBN abrasive particles were significantly increased. For the application of glass coated cBN abrasives to vitrified grinding wheels, it was evident that the glass coating provided high bonding strength between cBN abrasive grains and vitrified bond system.     

Mesoporous inorganic salts with crystal defects: unusual catalysts and catalyst supports

We proposed a strategy to synthesize mesoporous inorganic salt particles using the special properties of ionic liquid (IL) mixtures, and hollow mesoporous LaF₃, NdF₃, and YF₃ particles were synthesized and characterized using different techniques. The size of the mesopores in the salt particles was about 4 nm, and the materials were full of crystal defects. The LaF₃, NdF₃ and YF₃ particles were used as the catalysts for the cyanosilylation reaction of benzaldehyde using trimethylsilyl cyanide, and Ru/LaF₃ and Ru/NdF₃, in which Ru nanocatalysts were supported on the LaF₃ and NdF₃ particles with mesopores, were used to catalyze hydrogenations of benzene to cyclohexane and levulinic acid (LA) to γ-valerolactone (GVL). It was discovered that the activities of these catalysts were unprecedentedly high for these reactions. Detailed study showed that both the crystal defects and the mesopores in the salt particles played crucial roles for the extremely high catalytic activity.     

Application of solid-phase microextraction for the determination of organophosphorus pesticides in textiles by gas chromatography with mass spectrometry

A method based on solid-phase microextraction (SPME) and gas chromatography with mass spectrometry (GC/MS) for the determination of 18 organophosphorus pesticides (OPPs) in textiles is described. Commercially available SPME fibers, 100 μm PDMS and 85 μm PA, were compared and 85 μm PA exhibited better performance to the OPPs. Various parameters affecting SPME, including extraction and desorption time, extraction temperature, salinity and pH, were studied. The optimized conditions were: 35 min extraction at 25 °C, 5% NaSO₄ content, pH 7.0, and 3.5 min desorption in GC injector port at 250 °C. The linear ranges of the SPME-GC/MS method were 0.1-500 μg L⁻¹ for most of the OPPs. The limits of detection (LODs) ranged from 0.01 μg L⁻¹ (for bromophos-ethyl) to 55 μg L⁻¹ (for azinphos-methyl) and the RSDs were between 0.66% and 9.22%. The optimized method was then used to analyze 18 OPPs in textile sample, and the determined recoveries were ranged from 76.7% to 126.8%. Moreover, the distribution coefficients of the OPPs between 85 μm PA fiber and simulative sweat solution (K_pa/s) were determined. The determined K_pa/s of the OPPs correlated well with their octanol-water partition coefficients (r = 0.764 and 0.678) and water solubility (r = −0.892 and −0.863).     

Synthesis,crystal structure,and photoluminescence of zinc complex [Zn(Qina)<Subscript>2</Subscript>(DMSO)<Subscript>2</Subscript>] · 2DMSO

A novel complex [Zn(Qina)₂(DMSO)₂] · 2DMSO (I) (Qina = quinaldic acid, DMSO = dimethyl sulfoxide) has been synthesized and characterized by X-ray diffraction, elementary analysis, and IR spectrum. The unit cell parameters for complex I: a = 8.2884(11), b = 22.015(3), c = 9.0685(12) Å, β = 100.61(0)°, V = 1626.41(40) ų, Z = 2, space group, P2₁/n. In the complex I, the Zn(II) atom was six-coordinated to form a distorted octahedral geometry by two Qina ligands and two dimethyl sulfoxide molecules. The crystal structure is stabilized by hydrogen bonds, C - H... π, π-π stacking interaction between adjacent complexes. The binding of the complex I with calf thymus DNA has been investigated by fluorescence spectroscopic studies. The result suggested that the complex intercalates into DNA base pairs.     

A novel antioxidant isobenzofuranone derivative from fungus Cephalosporium sp.AL031

Bioassay-guided fractionation of metabolites from the fungus Cephalosporium sp.AL031 isolated from Sinarundinaria nitida led to the discovery of a new isobenzofuranone derivative, 4,6-dihydroxy-5-methoxy-7-methylphthalide (1), together with three known compounds: 4,5,6-trihydroxy-7-methyl-1,3-dihydroisobenzofuran (2), 4,6-dihydroxy-5-methoxy-7-methyl-1,3-dihydroisobenzofuran (3) and 4,5,6-trihydroxy-7-methylphthalide (4). The structure of the new compound 1 was determined based on MS, 1D and 2D NMR spectral data. Compounds 1-4 showed potent antioxidant activity with EC?? values of 10, 7, 22 and 5 μM by 1,1-diphenyl-2-picryhydrazyl (DPPH) radical-scavenging assay.     

Synthesis of 3-substituted 1,5-aldehyde esters via an organocatalytic highly enantioselective conjugate addition of new carbonylmethyl 2-pyridinylsulfone to enals

A highly enantioselective organocatalytic protocol for conjugate addition of new nucleophilic carbonylmethyl 2-pyridinylsulfone to enals has been developed in good yields and with high enantioselectivities. The resulting Michael adducts are versatile building blocks for a variety of organic transformations.     

Design, preparation, X-ray crystal structure, and reactivity of o-alkoxyphenyliodonium bis(methoxycarbonyl)methanide, a highly soluble carbene precursor

The preparation, X-ray structure, and reactivity of new, highly soluble, and reactive iodonium ylides derived from malonate methyl ester and bearing an ortho substituent on the phenyl ring are reported. These new reagents show higher reactivity than common phenyliodonium ylides in the Rh-catalyzed cyclopropanation, C-H insertion, and transylidation reactions under homogeneous conditions.     

Self-assembly and emulsification of poly{[styrene-alt-maleic acid]-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]}

Self-assembled polymeric micelles can be used as efficient particulate emulsifiers. To explore the relationship between the structure and the oil-water interfacial behavior of the micelle emulsifiers, a new type of amphiphilic random copolymer, poly{(styrene-alt-maleic acid)-co-[styrene-alt-(N-3,4-dihydroxyphenylethyl-maleamic acid)]} (SMA-Dopa), was synthesized, self-assembled into micelles, and used as emulsifiers. SMA-Dopa was synthesized via an aminolysis reaction between dopamine and commercial alternating copolymer poly(styrene-alt-maleic anhydride) (SMA). Dopamine moiety facilitated the self-assembly of the SMA-Dopa in selective-solvent into stable micelles, and increased the adsorption of the SMA-Dopa at the oil-water interface. Additionally, the structural transition of the self-assembled SMA-Dopa52 micelles in response to pH and salinity changes were confirmed by means of TEM, AFM, DLS, aqueous electrophoresis techniques, potentiometric titration, and pyrene fluorescence probe methods. Micelles shrunk with increasing salinity, and flocculation of the shrunken primary micelles occurred at salt concentration exceeding 0.1 M. The micelles swelled with increasing pH, and the disassociation of the SMA-Dopa52 micelles occurred at pH above approximately 6.5. The structure of the micelles plays a crucial role in the oil-water interfacial performance. Micelles with various structures were used as emulsifiers to adsorb at the styrene-water and toluene-water interfaces. The emulsifying characteristics demonstrated that self-assembled SMA-Dopa52 micelles with moderately swollen structure (at 2 < pH < 6) combine the advantages of the solid particulate emulsifiers and polymeric surfactants, possessing excellent emulsifying efficiency and good emulsion stability. Moreover, the emulsifying performance of the SMA-Dopa52 micelles could be enhanced by the addition of salt.