AnX α study of the laser crystal MgF2:V2+

The electronic structures of the laser crystal MgF₂:V²⁺ were obtained with the spinpolarized MS-X method. The calculated value of 10Dq and the energies of the lowest doublet states were given for the first time. The relations between the laser properties and the electronic structures were discussed.     

[Co(2,3-tri)(ibn)Cl][ZnCl4]体系一经式异构体的晶体结构及体系异构体的理论计算研究

用单晶X-射线衍射分析方法解析了[Co(2,3-tri)(ibn)Cl]²⁺(2,3-tri=N-(2-氨基乙基)-1,3-丙二胺,ibn=1,2-二氨基-2-甲基丙烷)体系中一经式异构体(m2-[Co(2,3-tri)(ibn)Cl][ZnCl₄])。该晶体属单斜晶系,空间群P2₁/c,a=11.317(3)?,b=14.931(4)?,c=11.646(3)?,β=1     

Fabrication of tunable colloid crystals from amine-terminated polyamidoamine dendrimers

A pH-responsive colloidal crystal was assembled using core-shell composite spheres, poly(styrene-methyl methacrylate-acrylic acid) (P(St-MMA-AA)) spheres covered by generation 4 amine-terminated polyamidoamine dendrimers. The light reflection of the colloidal crystal film can be tuned at different pH due to different protonation level of the dendrimers. The method shows a facile way to fabricate diffraction-based chemical and biological sensors by exploiting the effect of photonic crystal cooperated with tunable nanoparticles.     

遗传算法在构象搜寻中的应用

遗传算法是一种模仿自然进化进程的新颖的启发式优化方法。通过它，人们可以在计算机上对所需的各种问题实施进化操作，最终产生理想的结果。遗传算法现已被广泛于计算机辅助设计、工程设计、系统模拟等领域并取得了极大的成功。本文拟对遗传算法在对大、中、小分子的构象搜寻中的应用作一较全面的综述。     

用铜（Ⅱ）—L—精氨酸配体交换薄层色谱拆分氨基酸对映体

报道了一种新的配体交换薄层色谱拆分氨基酸对映体的方法。以醋酸铜－Ｌ－精氨酸的络合物为配体交换剂，用浸渍的方法吸附在硅胶薄层板上，制成配体交换薄层，用ＰＲＩＳＭＡ优化法选择出展开剂的最佳组成为：甲醇／乙腈／四氢呋喃／水＝８０：８．２：５．８：６，在此色谱条件下，十对氨基酸对映体得到良好的分离，Ｄ－和Ｌ－氨基酸的相对比移值在１．０９－２．４０之间。文中对配体交换薄层的制备方法，样品的分子结构及色谱行为     

新铜试剂—曙红Y萃取光度法测定微量铜

铜(I)-新铜试剂(NCP)-曙红Y(Eosin Y)能形成离子对三元络合物,其络合比为1:2:1。在氯仿中该络合物的λ_(max)=544nm,表观摩尔吸光系数ε=6.83×10~4 L mol~(-1)cm~(-1)。以柠檬酸盐作掩蔽剂,控制水相pH=4.5,相比(水相/氯仿)=2/1,可将络合物定量萃入氯仿中。一般常见的共存离子均不干扰测定,显色稳定性好,线性范围为0～5μg cu/5ml氯仿。方法灵救度高,选择性好。     

1-氨基环丙烷-1-羧酸的合成: 新型植物生长调节剂

本文报道了合成1-氨基环丙烷-1-羧酸的简便而价廉的方法,即乙酰乙酸乙酯法和α-氰乙酸乙酯法;并测定了产品的结构。     

SYNTHESIS AND CHARACTERIZATION OF ORGANOMONTMORILLONITE AND POLYAMIDE 66/MONTMORILLONITE NANOCOMPOSITES

The montmorillonites (MMTs), layered, smectite-type silicates, were premodified by two different methods priorto the polymer melt intercalation. In one case MMTs were modified with cetyltrimethylammonium bromide (CTAB), andtermed as organomontmorillonites (OMMTs); in the other case MMTs were modified by nylon, and the products were calledmodified montmorillonites (MMMTs). The effects of CTAB and nylon on the MMTs were investigated by using TG andWAXD. The results show that interlayer spacings of CTAN and nylon modified MMTs are larger than that of sodium MMTs.Then, polyamide 66 (PA 66)/MMT nanocomposites were obtained through the method of melt intercalation of polymers. Thenanocomposites were characterized by WAXD, TEM and Molau experiments. The results indicate that the MMTs dispersehomogeneously in the PA 66 matrix. The mechanical properties of nanocomposites, such as tensile properties and flexuralproperties, were also measured and show a tendency to increase with increase of MMT content and reach the maximumvalues at 5phr MMT content. The heat distortion temperature (HDT) of the nanocomposites (7 phr) is about 32 K higher thanthat of pure PA 66.