β-Si3N4电子结构和光学性质的第一性原理研究

采用基于密度泛函的平面波赝势方法(PWP)和广义梯度近似(GGA),计算了β相氮化硅(β-Si3N4)的电子结构和光学性质,得到的晶格常数、能带结构等均与实验结果较好符合.进一步还研究了β-Si3N4的光吸收系数以及禁带宽度随外压力的变化规律,为β-Si3N4材料在高压条件下的应用提供了理论参考.     

球形拓扑中复杂形状生物膜泡的获得及其稳定性分析

通过在Surface Evolver软件中建立一些与目标形状相似的初始形状，经长时间演化后，得到了实验上已经观察到的具有D_2h和D_3h对称性的海星形生物膜泡.通过跟踪不同形状膜泡的Hessian矩阵的本征值，确定了双凹圆盘与海星形及哑铃形之间的相变是不连续的，其间所经历的三角扁盘及椭圆扁盘形中间相在SC模型中通常是不稳定的. 关键词： SC模型 生物膜泡 Surface Evolver     

Ar?NO团簇的同步辐射光电离研究

利用国家同步辐射实验室合肥光源的真空紫外同步辐射，使NO分子和Ar原子混合物的超声分子束发生光电离，测量了Ar，NO和异类团簇Ar·NO的光电离效率谱. 在谱中，在与Ar原子的共振线对应的能量区域(11.5—12.0 eV)观察到一个强的类共振结构. 这个结果表明，在异类团簇Ar·NO的内部，稀有气体Ar原子的激发能转移到与它接触的分子NO上，使分子NO发生电离. 关键词： Ar·NO团簇 同步辐射 光电离 能量转移     

PVK∶DBVP掺杂体系的能量转移及发光性质的研究

研究了不同比例的PVK与齐聚PPV衍生物DBVP掺杂体系的能量转移和发光特性.通过对PVK,DBVP及PVK:DBVP掺杂体系的UV-vis,PL和PLE光谱的研究,分析了PVK与DBVP之间的能量转移过程.利用PVK在体系中类似于溶剂的分散作用,制备了结构为ITO/PEDOT/PVK:DBVP/LiF/Al的电致发光器件,研究了掺杂体系的电致发光性能.结果表明,在掺杂体系的光致发光和电致发光中,PVK的发射被有效地抑制,PVK与DBVP之间发生了非常有效的能量转移,通过调节PVK与DBVP的比例,可以获得蓝色和绿色发光,同时可以改善器件的发光性能,当PVK与DBVP的重量比为1∶2时,器件的绿色发光效率达到1·06cd/A,此时发光亮度为52cd/m2.     

面心立方晶体外延膜沉积生长中失配位错的结构与形成过程

用分子动力学方法对5%负失配条件下面心立方晶体铝薄膜的原子沉积外延生长进行了三维模拟.铝原子间的相互作用采用嵌入原子法(EAM)多体势计算.模拟结果再现了失配位错的形成现象.分析表明，失配位错在形成之初即呈现为Shockley扩展位错，即由两个伯格斯矢量为〈211〉/6的部分位错和其间的堆垛层错组成，两个部分位错的间距、即层错宽度为1.8 nm,与理论计算结果一致；外延晶体薄膜沉积生长中，位错对会发生滑移，但其间距保持稳定.进一步观察发现，该扩展位错产生于一种类似于“局部熔融-重结晶”的表层局部无序紊乱- 关键词： 失配位错 外延生长 薄膜 分子动力学 铝     

SiOx纳米管的制备及其发光特性

以液态金属镓为媒介,利用热蒸发法合成大量非晶SiOx纳米管,这些纳米管管径均匀分布,平均约80 nm,长度大于10μm,且管内外径比例较小．分析发现,在实验过程中,熔入金属镓液滴中的硅元素和氧元素结合并从液滴的表面饱和析出,形成以镓为中心的非晶SiOx纳米管状结构．在室温中,利用260 nm的激发光源激发SiOx纳米管,发现在蓝光波段附近发出强而稳定的PL谱线,这可能与样品中的氧缺陷和空位有关．     

Growth studies of m-GaN layers on LiAlO2 by MOCVD

This paper reports that the m-plane GaN layer is grown on （200）-plane LiAlO2 substrate by metal-organic chemical wpour deposition （MOCVD） method. Tetragonal-shaped crystallites appear at the smooth surface. Raman measurement illuminates the compressive stress in the layer which is released with increasing the layer＇s thickness. The high transmittance （80%）, sharp band edge and excitonic absorption peak show that the GaN layer has good optical quality. The donor acceptor pair emission peak located at -3.41 eV with full-width at half maximum of 120 meV and no yellow peaks in the photoluminescence spectra partially show that no Li incorporated into GaN layer from the LiAlO2 substrate.     

Relationship between chemical bond parameters and superconducting temperature in HgBa2Can−1CunO2n+2+δ (n=1, 2, 3, 4)

Bond covalency and valence of elements in HgBa₂Ca_n−1Cu_nO_2n+2+δ (n=1, 2, 3, 4) were calculated and their relationship with T_c was discussed. For both oxygen and argon annealed samples, the results indicated that with the increase of n, the trend of bond covalency of Hg-O and Cu-O was the same or opposite compared with that of superconducting temperature. This may suggest that the magnitudes of Cu-O and Hg-O bond covalency are important in governing the superconducting temperature. For the highest T_c sample, Hg had the lowest valence, implying that lower valence of Hg was preferred in order to produce higher T_c. For fixed n, the valence of Cu in oxygen annealed samples was larger than that in argon annealed samples, indicating that oxygen annealed samples produced more carriers than argon annealed samples.     

AERODYNAMIC DAMPING OF RANDOMLY EXCITED PLATES IN STATIONARY AND MOVING AIR

An experimental study of the aerodynamic damping of oscillating plates has been undertaken. Plates of various shapes were placed into an air flow normal to the plate and excited to oscillate parallel to the flow direction by electromagnetic forces of equal amplitudes and random frequencies. The aerodynamic damping of oscillating plates, evaluated in terms of a quality Q-factor from a frequency response resonance curve, was found to vary linearly with the absolute pressure in stationary surrounding air and with the air flow velocity in moving air. The flow velocity was also found to affect the aerodynamic damping more than the absolute pressure. A simple empirical model has been developed to predict the variation of the aerodynamic damping with the flow velocity.     

差分吸收光谱法测量大气污染的测量误差分析

差分吸收光谱技术被广泛地应用于测量大气中微量元素的浓度，尽管该技术利用最小二乘法来反演待测气体的浓度，能够得到很高的测量精度。但是，由于仪器本身的噪声以及测量波段其它气体的干扰等，使得仪器的测量有一定的误差，而且上述因素还决定着仪器的测量下限。对差分吸收光谱方法的测量误差以及引起误差的原因作了详细的分析。