上转换发光免疫试纸条扫描检测系统研究

研制了一种以上转换发光材料作为标记物的扫描检测系统,有别于传统的测量方法,可做出定量和多重分析.扫描检测系统以扫描方式逐点测量经生物反应而结合上去的UCP颗粒的含量,记录整个免疫试纸条的信息,计算出被测样品中特定生物分子的浓度.实验结果表明,该系统对兔抗鼠疫免疫球蛋白（IgG）标准样品的检测灵敏度达到百ng/mL量级,且具有变异系数小于6%的重复性,符合生物免疫测定的要求.     

Effects of guanidinium cations on structural,optoelectronic and photovoltaic properties of perovskites

Guanidinium (GA) cations are intentionally introduced in MAPbl3 perovskite by considering its potential capability of stabilizing the material through plenty of...     

申嗪霉素在辣椒及土壤中残留动态的研究

采用高效液相色谱法测定1%申嗪霉素悬浮剂在辣椒及土壤中的残留动态和最终残留量。辣椒和土壤中申嗪霉素的半衰期分别为2.80~3.63d和2.83~4.62d,检出限分别为0.02mg/kg和0.01mg/kg,回收率分别为80.1%~102.5%和82.0%~97.1%,相对标准偏差分别为7.6%~9.4%和6.3%~8.4%。     

毛细管电泳无胶筛分介质分离DNA的机理

快速、高效而灵敏的分离技术对于DNA的分析是至关重要的。使用无胶筛分介质的毛细管电泳是最重要的DNA分离技术之一,通常使用无交联的高分子溶液作为无胶筛分介质。本文在介绍高分子溶液理论的基础上,综述了DNA在毛细管电泳无胶筛分介质（缠结溶液和稀溶液）中的分离机理,主要包括Ogston筛分模型、各种修正的爬行模型、瞬态缠结偶合机理及其改进机理等。     

Characteristic ratio of the mean-square end-to-end distance of poly(vinylidene fluoride) with microstructural defects

The segment length distribution of isoregic head-to-head and tail-to-tail sequences in poly-(vinylidene fluoride) (PVF₂)

1 System. name: poly(1,1-difluoroethylene).

chains is calculated from ¹⁹F NMR literature data. It is found that the average length of inverse segments is very close to one unit; therefore almost all head-to-head defects are immediately repaired by an adjacent tail-to-tail addition. The role of microstructure on the characteristic ratio of the end-to-end distance is then investigated. Results obtained by two different methods indicate that, in agreement with previous Monte Carlo calculations, defects play a minor role for the conformational characteristics of PVF₂. However, a slight contraction of about 4% is expected for very defective chains.     

低压供热涂层材料制备及热性能研究

低压供热技术具有安全系数高和节能降耗等优势,因而成为石化稠油长输管线、风力发电叶片冬季防覆冰和室内供暖等领域的研究热点之一。本文制备了一系列低压供热涂层材料,研究不同碳功能填料对涂层发热速率、发热功率及最高发热温度的影响规律,并揭示石墨烯和碳纤维对提升涂层材料热性能的协同作用。其中石墨烯纳米片的还原程度对材料热性能具有重要影响,降低其表面官能团密度对提升涂层供热特性具有促进作用,但是官能团密度过低会导致石墨烯纳米片的团聚现象,引起涂层发热不均匀。加入适量碳纤维可以提高石墨烯的均匀分散性,提升发热速率。优化石墨烯纳米片和碳纤维的比例后,采用24V电压驱动时,涂层材料的发热速率达到7.1℃·s^-1,功率密度为800W·m^-2,最高发热温度为124℃。     

Upper Bound Shakedown Analysis of Plates Utilizing the C1 Natural Element Method

This paper proposes a numerical solution method for upper bound shakedown analysis of perfectly elasto-plastic thin plates by employing the C1 natural element m...