Design of iron chelators with therapeutic application

Iron is essential for the proper functioning of all living cells, however it is toxic when present in excess. Thus, using iron chelators as therapeutic agents, namely chelation therapy, has received increasing attention. The objective of this review is to discuss the factors which should be considered when designing clinically useful iron chelators, to present the application of iron chelators in the treatment of iron overload associated with β-thalassaemia major and sickle cell anaemia, and to highlight the potential applications in the treatment of neurodegenerative disorders and microbial infection. This article reviews recent knowledge centred on these themes and indicates the growing importance of the concept of iron chelation in medicine.     

Influence of thermal process on microstructural and physical properties of ambient pressure dried hydrophobic silica aerogel monoliths

The experimental results of thermal process on the microstructural and physical properties of ambient pressure dried hydrophobic silica aerogel monoliths are reported and discussed. With sodium silicate as precursor, ethanol/hexamethyldisiloxane/hydrochloric acid as surface modification agent, the crack-free and high hydrophobic silica aerogel monoliths was obtained possessing the properties as low density (0.096 g/cm³), high surface area (651 m²/g), high hydrophobicity (~147°) and low thermal conductivity (0.0217 Wm/K). Silica aerogels maintained hydrophobic behavior up to 430 °C. After a thermal process changing from room temperature to 300 °C, the hydrophobicity remained unchanged (~128°), of which the porosity was 95.69% and specific density about 0.094 g/cm³. After high temperature treatment (300–500 °C), the density of final product decreased from 0.094 to 0.089 g/cm³ and porosity increased to 96.33%. With surface area of 466 m²/g, porosity of 91.21% and density about 0.113 g/cm³, silica aerogels were at a good state at 800 °C. Thermal conductivities at desired temperatures were analyzed by the transient plane heat source method. Thermal conductivity coefficients of silica aerogel monoliths changed from 0.0217 to 0.0981 Wm/K as temperature increased to 800 °C, revealed an excellent heat insulation effect during thermal process.     

Two new compounds from Zingiber officinale

A new cyclic diarylheptanoid,1,5-epoxy-3-hydroxy-1-(3-methoxy-4,5-dihydroxyphenyl)-7-(4-hydroxyphenyl)-heptane (1),as well as a new monoterpene,10-O-β-D-glucopyranosyl-hydroxy cineole (2) were isolated from the rhizomes of Zingiber officinale. The structures of compounds 1 and 2 were established based on their spectral data.In addition,the antioxidant activities of these compounds were also measured.     

Preferential Oxidation of CO in Excess Hydrogen over CuO-CeO2 Catalyst Prepared by Chelating Method

The CuO-CeO2 catalyst prepared by chelating method has a superior catalytic performance for the preferential oxidation of CO in rich hydrogen, compared with the CuO-CeO2 catalyst prepared by coprecipitation method. The CO conversions over these catalysts, at 120℃and 120000 ml/(g-h) in the absence of CO2 and H2O, are 99.6% and 88.6%, respectively, and the selectivity of O2 over these catalysts is very close (i.e. 51.3% and 55.8%, respectively). The influence of certain factors such as hydrogen concentration, carbon monoxide concentration, H2O, O2/CO ratios, and space velocity on the catalytic performance of CuO-CeO2 catalyst prepared by chelating method is also studied. The results show that the addition of hydrogen and H2O has a negative effect on the catalytic performance of CuO-CeO2 catalyst, however, the variation of space velocity and the O2/CO ratio causes a comparatively slight influence.     

EFFECTS OF COUPLING AGENTS ON THE CRYSTALLIZATION BEHAVIOR OF PP/T-ZnOw COMPOSITES

The objectives of this paper are to understand the crystallization behavior of polypropylene(PP)composites with surface modified tetra-needle-shaped zinc oxide whisker(T-ZnOw).T-ZnOw was surface modified with different coupling agents,such as silane coupling agents(KH-550,KH-560)and titanate coupling agent(NDZ-105),in order to improve the compatibility between PP and T-ZnOw.DSC and POM were used to characterize the melt and crystallization behavior and the crystalline structures of the composites,respectively.The results show that the surface modified T-ZnOw acts as a nucleating agent of PP crystallization,depending on the coupling agent used for modification.KH-550 and KH-560 have more apparent role in improving the interfacial interaction than NDZ-105 and induce PP crystallization at higher temperature and with smaller spherulites size.The results also suggest that the crystallization behavior depends on not only the content of coupling agent,but also the content of the surface modified T-ZnOw used in the composites.     

Synthesis and characterization of second-order nonlinear optical polyurethane with high thermal stability

A second-order nonlinear optical polyurethane was formed with an X-type multi-dimensional charge-transfer (CT) chromophore (DNPIPDHPI) and 3,3^′-dimethoxy-4,4^′-diphenyl diisocyanate. Simultaneous poling and polymerization and in situ second harmonic generation (SHG) measurement technique was carried on to evaluate the thermal stability of the poling induced orientation. The SHG signal of the poled polymer film was not decay below 150 °C and remains 90% of relative d₃₃ value at 200 °C, which is better than the results reported in literature. Comparison of thermal stability indicates that the X-type chromophores possess better property in controlling the decay of the SHG activity than classic chromophores.     

Selective oxidation of octadecan-1-ol to octadecanoic acid over Co3O4/SiO2 catalysts

Factors (reaction temperature, reaction time, flow rate of oxygen, amount of catalyst, etc.) influencing the catalytic properties of Co₃O₄/SiO₂catalyst in the oxidation octadecan-1-ol to octadecanoic acid were investigated. The catalysts were characterized by means of XRD, FT-IR and N₂-adsorption. The experimental results indicate that under the optimal condition the selectivity to octadecanoic acid reached 97.5 % over 5 % Co₃O₄/SiO₂ catalyst.This revised version was published online in December 2005 with corrections to the Cover Date.     

1-甲基-2-咪唑醛肟锰(Ⅲ)配合物的合成、晶体结构及电化学性质研究

采用溶剂扩散法制备了锰(Ⅲ)的两个单核配合物[Mn(Miao)2(H2O)2]ClO4(1)和[Mn(Miao)2(DMF)2]ClO4(2)(HMiao=1-甲基-2-咪唑醛肟,DMF=N,N-二甲基甲酰胺)的晶体.X射线衍射单晶结构表明:两种配合物均属三斜晶系,空间群Pi锰与配体形成变形的八面体结构.采用Gaussian 03W程序计算了HMiao配体的电荷密度,理论计算与实际配位形式完全吻合.测定了两种锰配合物在DMF溶液中的电化学性质,循环伏安法表明两配合物均存在较好的氧化还原性,其氧化还原峰分别为0.75和0.70V,-0.32和-0.50 V,是Mn(Ⅲ)和Mn(Ⅱ)之间的相互转化.     

Synthesis of 3-(quinoxalin-2-yl)-2H-chromen-2-ones under microwave irradiation

Abstract  A facile procedure for the synthesis of quinoxalines is being reported starting from 3-(2-bromoacetyl)coumarins or 3-(2-bromobutanoyl)coumarins and substituted o-phenylenediamines. The reactions were carried out under catalyst-free and microwave irradiation conditions producing the title compounds in moderate to excellent yields in a short time with easy workup. The structures of all new compounds have been confirmed on the basis of their IR, ¹H NMR, ¹³C NMR, and HRMS data. Graphical Abstract        

新型苯并噁唑侧基聚酰亚胺的合成、结构与性能研究

为了改善聚酰亚胺的不溶不熔性, 一类可溶性苯并噁唑侧基聚酰亚胺树脂被成功制备. 从合成的新型二元胺单体出发, 制备了侧链为邻羟基苯胺酰胺结构的聚酰亚胺体系, 进一步催化环化邻羟基苯胺酰胺为苯并噁唑结构, 并对这两类不同结构的聚合物树脂进行了红外光谱的结构表征, 以及最终成膜的力学性能和耐热性能测试. 研究结果表明: 苯并噁唑侧基聚酰亚胺的力学性能优于相应的主链型聚酰亚胺, 且TGA分析表明, 其初始分解温度高达597 ℃, 有望用于航空航天方面高强、高模、耐高温的结构材料.