燃爆冲击作用下岩石初始破坏区形成机制与主控因素

为揭示燃爆冲击作用下井周岩石破坏区的形成机制,并分析影响初始破坏区(破碎区和初始裂隙区)的主控因素,开展了两种岩样在不同加载速率下的冲击破坏实验, 分析了岩石冲击破坏模式及岩石对加载速率的响应, 借助基于Von Mise准则建立的岩石冲击破坏的破碎区和初始裂隙区计算模型可知:加载速率低于190 GPa/s时,可依据冲击峰值压力引导的应力分布确定破碎区和初始裂隙区作用范围;燃爆压裂在近井地带主要产生破碎区和裂隙区,破碎区直径为井眼直径的1~3倍,初始裂隙区直径为井眼直径的5~7倍;冲击载荷作用下,初始破坏区与加载速率、脆性指数呈正相关,且受脆性指数影响更显著。研究结果可提高对燃爆压裂过程中岩石的破坏模式及其主控因素的认识深度,为燃爆压裂冲击条件设计提供指导。     

HZSM-5/SAPO-11复合分子筛的制备、 表征及在异丁烷芳构化反应中的催化性能

将经聚二烯丙基二甲基氯化铵(PDDA)预处理的HZSM-5分子筛置于SAPO-11分子筛的合成母液中, 在水热体系中原位制备了一系列HZSM-5/SAPO-11复合分子筛, 并对分子筛的结构、 形貌及酸性进行了表征, 考察了其在异丁烷芳构化反应中的催化性能. 结果表明, 所得复合分子筛由HZSM-5表面包覆约20 nm的SAPO-11微晶组成, 且通过调变SAPO-11的Si含量可以有效调变复合分子筛的酸性, 提高芳构化强弱酸协同催化作用, 有效抑制裂解副反应. 结合异丁烷芳构化转化率及液体收率结果可知, 当SAPO-11合成溶胶中硅铝摩尔比为0.6时, HZSM-5/SAPO-11复合分子筛的芳构化活性及稳定性最佳.     

铝盐与氢氧化钠反应生成氢氧化铝沉淀的实验探究

通过数字实验对Al2(SO4)3溶液与NaOH反应过程中pH的变化进行探究,得出pH与NaOH溶液的体积(V)之间的变化曲线,从而建立铝盐与NaOH溶液反应时,Al(OH)3沉淀的生成与溶解和NaOH量的变化关系。此研究可以改变人们在Al(OH)3两性认识上存在的误区,对中学化学教学起到积极的作用。     

磁性和非磁性元素掺杂的自旋梯状化合物Sr_(14)(Cu_(0.97)M_(0.03))_(24)O_(41)(M=Zn,Ni,Co)的结构和电输运性质

利用固相反应法制备了Sr14Cu24O41及其系列B位掺杂Sr14(Cu0.97M0.03)24O41(M=Zn,Ni,Co)的样品.X射线衍射分析显示,所有样品均为纯相,晶格常数a与c没有明显的变化;Zn掺杂样品晶格常数b没有明显变化,而Ni,Co掺杂样品晶格常数b分别稍有增加.选区电子衍射研究揭示:磁性元素Ni,Co及非磁性元素Zn掺杂,可能主要替代了Sr14Cu24O41结构中自旋链上的Cu原子,从而影响了自旋链上的dimer排列,破坏电荷有序超结构.电输运测量显示:Zn2+,Ni2+,Co3+离子掺杂样品的电阻率降低,但仍体现半导体行为,所有的掺杂样品都存在一个渡越温度Tρ,当TTρ时,其导电机理是以单空穴热激发导电占主要地位,在TTρ时,配对的局域化空穴的一维变程跳跃导电占主要优势;在相同的掺杂量下,非磁性元素Zn掺杂对电阻率值的影响大于磁性元素Ni,Co掺杂的影响,而磁性元素Ni,Co掺杂对渡越温度Tρ的影响大于非磁性元素Zn掺杂的影响.     

NdFeB永磁体下YBaCuO块材在交流磁扰动中的悬浮力磁滞特性

研究了交流磁扰动对高温超导块材和永磁体之间悬浮力的影响。实验分析了在零场冷(ZFC)条件下,不同频率的交流磁场扰动下的悬浮力曲线;另外还研究了交流磁扰动在永磁体下降和上升过程中对悬浮力的影响,发现上升过程中悬浮力受交流磁场影响较大,而在下降过程中影响则较为不明显,同时随着交流磁场幅值的增大,悬浮力的滞回曲线逐渐加宽。说明交流磁场导致了超导块磁滞损耗的增加,对超导磁浮特性的研究具有理论意义。     

Modulational instability in a layered Kerr medium: theory and experiment

We present the first experimental investigation of modulational instability in a layered Kerr medium. The particularly interesting and appealing feature of our configuration, consisting of alternating glass-air layers, is the piecewise-constant nature of the material properties, which allows a theoretical linear stability analysis leading to a Kronig-Penney equation whose forbidden bands correspond to the modulationally unstable regimes. We find very good quantitative agreement between theoretical, numerical, and experimental diagnostics of the modulational instability. Because of the periodicity in the evolution variable arising from the layered medium, there are multiple instability regions rather than just one as in a uniform medium.     

�����п�ʽ΢��г��ǻ����ϵͳ�о�

介绍了开式微波谐振腔测量系统的工作原理及试验结果,获得了Æ10mm钢球模型在6.65kPa干燥空气中以速度5.44km.s-1飞行时的尾迹电子密度测量结果,并且与国外弹道靶试验数据进行了比较。试验结果表明,该系统能够满足模型尾迹电子密度变化对测量系统响应时间的要求,能很好地反映尾迹电子密度变化细节,电子密度测量范围达到109~1011cm-3。     

Implementation of a multi-scroll novel two-attractor grid chaotic system

This paper proposed a method of generating two attractors in a novel grid multi-scroll chaotic system. Based on a newly generated three-dimensional system, a two-attractor grid multi-scroll attractor system can be generated by adding two triangular waves and a sign function. Some basic dynamical properties, such as equilibrium points, bifurcations, and phase diagrams, were studied. Furthermore, the system was experimentally confirmed by an electronic circuit. The circuit simulation results and numerical simulation results verified the feasibility of this method.     

Modeling of 4H--SiC multi-floating-junction Schottky barrier diode

This paper develops a new and easy to implement analytical model for the specific on-resistance and electric field distribution along the critical path for 4H-SiC multi-floating junction Schottky barrier diode. Considering the charge compensation effects by the multilayer of buried opposite doped regions, it improves the breakdown voltage a lot in comparison with conventional one with the same on-resistance. The forward resistance of the floating junction Schottky barrier diode consists of several components and the electric field can be understood with superposition concept, both are consistent with MEDICI simulation results. Moreover, device parameters are optimized and the analyses show that in comparison with one layer floating junction, multilayer of floating junction layer is an effective way to increase the device performance when specific resistance and the breakdown voltage are traded off. The results show that the specific resistance increases 3.2 mΩ·cm 2 and breakdown voltage increases 422 V with an additional floating junction for the given structure.     

Antifungal activity of phenolic monoterpenes and structure-related compounds against plant pathogenic fungi

The aim of this work is to explore the possibility of using the phenolic monoterpenes (PMs) as leading compounds with antifungal activity against plant disease. The in vitro antifungal activities of carvacrol and thymol against seven kinds of plant pathogenic fungi were evaluated on mycelium growth rate method, and the results showed that carvacrol and thymol exhibited broad spectrum antifungal activity. Structure requirement for the antifungal activity of PMs was also investigated. The preliminary conclusion was that phenolic hydroxyl and monoterpene were basic structures for the antifungal activity of PMs, and the position of phenolic hydroxyl showed less effect. Ester derivatives of carvacrol and thymol were more effective than carvacrol and thymol against plant pathogenic fungi. We suggested that carvacrol, thymol and their ester derivatives could potentially be used as new fungicide leading compounds.