Study on hydrogen sulfide plasma passivation of 790-nm laser diode cavity surface

In order to improve the optical properties of the Ⅲ-Ⅴ laser diodes(LDs) by means of H2S plasma passivation technology,H2S plasma passivation treatment is performed on the GaAs(110) surface.The optimum passivation conditions obtained are 60-W radio frequency(RF)power and 20-min duration.So the laser cavity surfaces axe treated under the optimum passivation conditions.Consequently,compared with unpassivated lasers with only AR/HR-coatings,the catastrophic optical damage (COD) threshold value of the passivated lasers by H2S plasma treatment is increased by 33%,which is almost the same as that of (NH4)2Sx treatment.And the life-test experiment has demonstrated that this passivation method is more stable than(NH4)2Sx solution wet-passivated treatment.     

On S-Shaped Bifurcation Curves for a Class of Perturbed Semilinear Equations

By making use of bifurcation analysis and continuation method, the authors discuss the exact number of positive solutions for a class of perturbed equations. The nonlinearities concerned are the so-called convex-concave functions and their behaviors may be asymptotic sublinear or asymptotic linear. Moreover, precise global bifurcation diagrams are obtained.     

Growth mechanism of amorphous carbon by liquid plasma electrolytic deposition

The growth mechanism of amorphous carbon film by the liquid deposition process is still unclear. In this study, the influence of applied voltages on the surface morphology and microstructure of amorphous carbon films was investigated as well as the bonding probability at the film/substrate interface, and a new mechanism of film growth was proposed from the electrochemistry and non‐equilibrium thermodynamics viewpoints. The results showed that growth of amorphous carbon film involved the island groove morphology; more graphitic carbons are present within the film as the applied voltage increased. A coupling model of the growth mechanism including the ionization–absorption–dehydrogenation process and the chemical volume polymerization is highlighted. Copyright © 2016 John Wiley & Sons, Ltd.     

Frequency and development of slugs in a horizontal pipe at large liquid flows

The generation of slugs was studied for air–water flow in horizontal 0.0763 m and 0.095 m pipes. The emphasis was on high liquid rates (u_LS ? 0.5 m/s) for which slugs are formed close to the entry and the time intervals between slugs are stochastic. A “fully developed” slug flow is defined as consisting of slugs with different sizes interspersed in a stratified flow with a height slightly larger than the height, h₀, needed for a slug to be stable. Properties of this “fully developed” pattern are discussed. A correlation for the frequency of slugging is suggested, which describes our data as well as the data from other laboratories for a wide range of conditions. The possibility is explored that there is a further increase of slug length beyond the “fully developed” condition because slugs slowly overtake one another.     

化学法快速测定铁基非晶合金中硼含量的试样分解方法研究

用化学法测定铁基非晶合金中硼元素时,因合金试样难溶性及硼的某些特性,存在试样分解难的问题。利用H2O2强氧化性及硼既溶于酸又溶于碱的性质,通过试验确定了用H2O2(30%)与HCl(密度约1.19g/mL)分解试样,试样溶解完全。将该方法用于测定硼质量分数大于0.5%的铁基非晶合金中的硼,测定结果与ICP-AES法测定结果相符,测定结果的相对标准偏差小于1.5%(n=10)。     

Unscented fuzzy-controlled current statistic model and adaptive filtering for tracking maneuvering targets

A novel adaptive algorithm for tracking maneuvering targets is proposed. The algorithm is implemented with fuzzy-controlled current statistic model adaptive filtering and unscented transformation. A fuzzy system allows the filter to tune the magnitude of maximum accelerations to adapt to different target maneuvers, and unscented transformation can effectively handle nonlinear system. A bearing-only tracking scenario simulation results show the proposed algorithm has a robust advantage over a wide range of maneuvers and overcomes the shortcoming of the traditional current statistic model and adaptive filtering algorithm.     

Adsorption properties and photocatalytic activity of TiO2/activated carbon fiber composite

Photocatalysts of titanium dioxide (TiO₂) and TiO₂/activated carbon fiber (TiO₂/ACF) composite were prepared by sol-gel method, followed by calcining the pure TiO₂ sols and the TiO₂/ACF sols at 500°C for 2 h in a N₂ atmosphere, respectively. These photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM) and N₂ adsorption-desorption isotherms measurement. Batch experiments were conducted to study the adsorption property of TiO₂/ACF composite using methylene blue as adsorbate. The adsorption data obtained from different batch experiments were analyzed using pseudo-second-order kinetic model, the experimental data can be adequately described by the pseudo-second-order equation. The photodecomposition behavior of TiO₂/ACF was investigated in aqueous solution using methylene blue as target pollutant. It was found that methylene blue could be removed rapidly from water by TiO₂/ACF, the photocatalytic decomposition was obviously improved when the photocatalyst was used. Kinetics analysis revealed that the photocatalytic decomposition reaction can be described well by a first-order rate equation.     

Fusion of urban remote image based on multi-characteristics

A fusion approach is proposed to refine the resolution of urban multi-spectral images using the corre sponding high-resolution panchromatic (PAN) images. Firstly, the two images are decomposed by wavelet transformation, and five texture features are extracted from high-frequency detailed sub-images. Then a multi-characteristics fusion rule is used to merge wavelet coefficients from the two images according to the extracted features. Experimental results indicate that, comparing with the non-characteristic methods, the proposed method can efficiently preserve the spectral information while improving the spatial resolution of the urban remote sensing images.