Polypropylene films were irradiated with 60Co γ-rays in vacuum or in air and stored in air. Just after irradiation, the concentration of carbonyl group of the sample irradiated in air only increased with dose. The concentrations of both samples increased with storage time. The more the absorbed doses, the higher the increasing rates. The increasing rate of the concentration of carbonyl group during irradiation in air was higher than those during storage in air. Just after irradiation, the tensile strengths and the elongations of the both samples somewhat increased with dose at the doses less than 5 Mrad, but decreased at doses more than 13 Mrad. The tensile strength and the elongation of the sample irradiated in air decreased with storage time. Those of the sample irradiated in vacuum also decreased with storage time but the decreasing rates were much smaller than those in the sample irradiated in air. The gel fractions of the samples irradiated in vacuum and annealed in vacuum were somewhat higher than those irradiated in vacuum and not annealed. To elucidate high oxidation rate in the sample irradiated in air during and after irradiation, reaction mechanisms were discussed. To clarify the difference of mechanical properties between the samples irradiated in vacuum and in air, the effect of crosslink was considered, together with the oxidation. 相似文献
A mixture of six biphenyl nitrile compounds and three related substances with high hydrophobicity and similar structures was successfully separated by microemulsion electrokinetic chromatography (MEEKC) within 30 min. The microemulsion system contained 100 mM sodium dodecyl sulfate (SDS), 80 mM sodium cholate (SC), 0.81% v/v heptane, 7.5% v/v n-butanol, 10% v/v acetonitrile, and 10 mM borate. The addition of SC, organic modifiers, sample preparation, and temperature all showed remarkable effects on the separation. The capacity factor (k) was calculated by using dodecyl benzene as the marker for microemulsion, and the calculated partition coefficient log P(o/w) of the solutes was in the range of 3.35-7.38. The log k values matched well with the log P(o/w) with a correlation coefficient of 0.96. In addition, the linear correlation coefficients of each compound between peak area and concentration were from 0.996 to 0.998 with the repeatability RSD value < 1.2% for migration time and < 4.8% for peak area, and the highest theoretic plate number was > 586000. MEEKC was compared with micellar electrokinetic chromatography (MEKC) indicating that the former method is more suitable for this separation and can be used for the quality control of biphenyl nitrile compounds in the synthesis of liquid crystals. 相似文献
Contactless conductivity detection is successfully demonstrated for the enantiomeric separation of basic drugs and amino acids in capillary electrophoresis (CE). Derivatization of the compounds or the addition of a visualization agent as for indirect optical detection schemes were not needed. Non-charged chiral selectors were employed, hydroxypropylated cyclodextrin (CD) for the more lipophilic basic drugs and 18-crown-6-tetracarboxylic acid (18C6H4) for the amino acids. Acidic buffer solutions based on lactic or citric acid were used. The detection limits were determined as 0.3 microM for pseudoephedrine as an example of a basic drug and were in the range from 2.5 to 20 microM for the amino acids. 相似文献
The reaction of 1,3-dipropyn-2-yloxycalix[4]arene with mercury(II)acetate could give mercury-containing alkynyl calixarenepolymer.The extraction behavior of 1,3-dipropyn-2-yl-oxycalix[4]arene towards mercury(II)ion was examined.When the moleratio of Hg~(2 )/calixarene was 1:1,the extractive percent can reach to 99.1%,and the extraction capacity was up to 431 mg/g.It couldalso decrease the Hg~(2 )concentration from 5 to 0.85 mg/L,which was only 17%of the national standard of effluent and satisfied thenational standard of drinking water.The extraction process included chemical reaction. 相似文献
Surface modification of fabrics is a powerful strategy that can endow fabrics with desired effects while keeping the intrinsic properties. Herein, an ordinary strategy, dipping-drying based layer-by-layer self-assembly (LbL) coating, is reported to functionalize fabrics’ surfaces. Firstly, the novel cation waterborne polyurethanes (QAHDPU) and anion waterborne polyurethanes (HDPU) are successfully designed and synthesized. By incorporating targeted molecule, hydantoin diol (HD) and quaternary ammonium salt with long alkyl chain (DOQA), the QAHDPU are antibacterial and hydrophobically functionalized. Taking advantage of strong adhesion, waterborne polyurethanes (WPUs) are physically bonded to surfaces of fabrics to generate durable antibacterial and hydrophobic fabrics. The QAHDPU with long alkyl chain combined with rough and porous fabric surface fabricates hydrophobic fabric surface, which can prevent bacteria from adhering to the fabrics. Furthermore, the coated fabrics present excellent antibacterial properties after chlorination, forming a second barrier against bacteria. The chlorinated coated fabrics, can inactivate 85.0–99.9% of Staphylococcus aureus and 85.0–97.7% of Escherichia coli with contact time of 60 min. The hydrophobic properties of coated fabrics are greatly improved with water contact angles of 122.0°–141.1°. In addition, the proposed method is applicable for a variety of fibers and expected to be used for industrial production.
Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride
solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced
the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and
Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with
zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental
condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v)
by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v). 相似文献
An operationally simple oxidative methyl esterification of primary alcohols in good yields using an iodine‐mediated poly[4‐(diacetoxyiodo)styrene] in methanol at room temperature is described. The polymeric reagent can be regenerated and reused as an environmentally benign reagent. 相似文献
A general, rapid and highly efficient method for the synthesis of diaryl ethers under the assistance of microwave irradiation was described. A series of diaryl ethers were prepared by direct coupling of phenols and aryl halides in good to excellent yields in anhydrous DMF or NMP at 150 ℃ within 20 rain. The presence of water was found to have a significant impact on the Ullmann C-O coupling reaction between aryl halides and phenols under microwave irradiation. 相似文献