Self-assembling of helical poly(phenylacetylene) carrying L-valine pendants in solution, on mica substrate, and on water surface

In the present work, we investigated self-assembling of a poly(phenylacetylene) carrying L-valine pendants (PPA-Val) in a water/methanol solution, upon evaporation of the solution on mica, and on the water surface. With intercalation of a fluorescence probe of Ru(phen)2(dppx)2+ (phen = 1,10-phenanthroline, dppx=7,8-dimethyldipyridophenazine) into the hydrophobic cavities associated by the PPA-Val chains, their helical structures were directly detected in solution with an in situ fluorescence microscope. Helical aggregates were observed with AFM upon evaporation of the solvents, suggesting that the helical structures in the solution are the building blocks of the helical aggregates. Self-assembling structures of PPA-Val on the water surface were, however, very different from that formed upon evaporation of its THF solution on the mica surface. The polymer chains associated into a monolayer of extended fibers on the water surface, whereas superhelical fibers formed on the mica surface. Water molecules play a critical role in inducing the polymer to form diverse morphological structures in its bulk solution and on its surface. In solution, the isotropic hydrophobic effect drove the polymer chains to form superhelical aggregates, while on the water surface, the hydrophobic effect concentrated mainly on the lateral part of the polymer, thus giving a monolayer of extended fibers.     

Formation and Structure of [Al_(13)(μ_3-OH)_6(μ_2-OH)_6(μ_2-OH)_(12)(H_2O)_(24)]Cl_(15)·13H_2O

1 INTRODUCTION At present, the polyaluminium compounds are mainly studied by single-crystal X-ray diffraction method to obtain the components, structures and exis- tence forms of aluminium in hydrolysis system, and then hydrolysis courses and mechanisms of each hydrolytic polyaluminium cation could be further dis- closed[1～5]. Generally, the single crystals suitable for X-ray diffraction are obtained from the crystallization of polyaluminium cations into sulfates or selenates. Following …     

Iodine(V) reagents in organic synthesis. Part 3. New routes to heterocyclic compounds via o-iodoxybenzoic acid-mediated cyclizations: generality, scope, and mechanism

The discovery and development of the o-iodoxybenzoic acid (IBX) reaction with certain unsaturated N-aryl amides (anilides) to form heterocycles are described. The application of the method to the synthesis of delta-lactams, cyclic urethanes, hydroxy amines, and amino sugars among other important building blocks and intermediates is detailed. In addition to the generality and scope of this cyclization reaction, this article describes a number of mechanistic investigations suggesting a single electron transfer from the anilide functionality to IBX and implicating a radical-based mechanism for the reaction.     

The Adsorption of NOx on Magnesium Aluminium Hydrotalcite

Magnesium aluminium hydrotalcite (Mg-Al-HT) with molar ratio of Mg-to-Al of 3 to 1 was prepared and characterized by X-ray diffraction (XRD) and infrared spectra (IR). The performances of Mg-Al-HT for the adsorption and desorption of NOx were studied. The results indicated that the adsorption capacity of the hydrotalcite for NOx was 1398.2mg/g, and it was higher than the acticarbon‘s. The adsorption capacities depended on adsorption time and temperature.Mg-Al-HT could be regenerated by thermal decomposition, and the adsorption efficiency had not changed markedly after three cycles.     

催化褪色光度法测定微量锰（Ⅱ）的研究

本文研究在硫酸介质中，锰（Ⅱ）催化ＥＤＴＡ还原重铬酸银，而使之褪色的新指示反应。确定了催化褪色反应动力学条件，锰（Ⅱ）的浓度在０－０．４μｇ／ｍｌ范围内，工作曲线呈良好的线性关系，检测限为０．０１１μｇ／ｍＬ，该方法用于天然水及污水中锰的测定，获得满意结果。     

Cu/TiO2-NiO上光促表面催化CO2和H2O合成CH3OH反应规律

采用溶胶-凝胶法制备了n(电子型)-p(空穴型) 复合半导体材料0.5％Cu/TiO2-2.0％NiO (w),利用X射线衍射(XRD)、透射电镜(TEM)、红外光谱(IR)、紫外-可见光漫反射(UV-Vis)、程序升温脱附(TPD)技术对材料结构、吸光性能、化学吸附性能进行了表征,研究了该材料对CO2和H2O合成CH3OH的光促表面催化反应(PSSR)规律.结果表明,所制备材料能够明显促进目的反应,室温条件下即有CH3OH生成.在200 ℃下,由于光-表面-热的协同效应,CO2转化率得以提高,且CH3OH的选择性达到87.5％ .根据实验结果,得出CO2在材料表面的卧式吸附态为CH3OH的前驱物,并对PSSR机理进行了讨论.     

酚醛型吸附树脂对咖啡因吸附性能的研究

利用 3种自制吸附树脂JDW 1、JDW 2、JDW 3和DuoliteS 761对咖啡因进行了静态和动态吸附研究 .结果发现 3种自制树脂对咖啡因的吸附性能明显优于DuoliteS 761 ;在吸附咖啡因的初始阶段 ,即达到 3 2 %～5 1 %平衡吸附百分率时 ,吸附速率数据和半经验速率方程很吻合 ,证实吸附咖啡因是粒扩散控制过程 ;酚醛型吸附树脂等温吸附咖啡因的平衡吸附数据符合Langmuir方程 ,相关系数在 0 99以上 ,因此 ,酚醛型吸附树脂吸附咖啡因属单分子层吸附 ;用 1mol LHCl和 40 %的甲醇溶液复合使用 ,效果很好     

Cu(bpy)22+—Nafion聚合物膜修饰电极研究

在目前的聚合物膜修饰电极领域中引起人们极大的研究兴趣,这是因为用离子交换方法可将许多电化学或电催化活性的阳离子物种固定于Nafion膜中,构成具有离子导电功能和特定电化学性质的膜合物膜修饰电极。     

Rapid quantitative capillary zone electrophoresis method for monitoring the micro-heterogeneity of an intact recombinant glycoprotein

A simple high-resolution capillary zone electrophoresis (CZE) method capable of rapidly assessing the micro-heterogeneity of a 24 kDa molecular weight glycoprotein, has been developed. Separation is carried out using a bare silica capillary at a pH of 2.5 in a commercially available electrophoresis buffer system composed of triethanolamine and phosphoric acid. Over 30 peaks were detected within a run time of 15 min using a 27 cm capillary and approximately 60 peaks were detected using a 77 cm capillary. Although most of the peaks arise from differences in the oligosaccharide structures present on the one glycosylation site on this molecule, other forms of micro-heterogeneity due to the presence of the nonglycosylated form of this glycoprotein and various types of chemical degradation, e.g., deamidation, are also responsible for the multitude of peaks observed. Although the exact chemical identity of each peak in the resulting electropherogram of this glycoprotein is not known, useful information can be obtained for assessing comparability, stability, and batch consistency. Factors impacting the resolution, precision, accuracy, and robustness of the assay are also discussed along with inherent advantages and limitations associated with measuring the micro-heterogeneity of intact glycoproteins.     

Diterpene derivative and chromone from Hypericum perforatum

A novel diterpene derivative, 5-methyl-5-(4,8,12-trimethyl-tridecyl)-dihydro-furan-2-one (1) and a new chromone, 5-hydroxy-7-methoxy-3-methyl-chromen-4-one (2), along with a known compound, phytol (3) have been isolated from the aerial parts of Hypericum perforatum. Their structures were established on the basis of spectroscopic analysis and by comparison with published values.