带凹性生产成本运输问题的新随机规划模型及其求解

提出了一种新的能反映决策者满意度的随机变量序关系,并据此研究了随机不等式的确定性等价类,方法被称为满意度方法.最后将其应用于带凹性生产成本运输问题的求解中,并将方法与常用的机会约束方法进行比较,说明满意度法不仅合理可行,而且当决策者对约束条件的要求越高时,它所得最优值越优于机会约束法所得最优值.     

An experimental study about the effect of arrangement on the fire behaviors of lithium-ion batteries

The gadolinium ferrochromite (GdFe_1?xCr_xO₃) was used as a case study of influence of chromium substitution on the perovskite structure in the entire composition range. By exploiting thermal analysis techniques (dilatometry, differential thermal analysis) the influence of chromium was investigated in the context of thermal stability of the canted antiferromagnetic ordering. It was found that the higher the chromium concentration was, the more the Néel temperature decreased, e.g., substitution of 26 % of iron atoms corresponded to a depression of about 60 K with respect to undoped gadolinium ferrite. For higher chromium concentrations the mixed gadolinium ferrochromite was paramagnetic at room temperature. Additional information on the crystal structure and, qualitatively, on the magnetic ordering as well was derived from the results of X-ray diffraction and Mössbauer spectroscopy measurements. For chromium content higher than 10 % the gadolinium ferrochromite may be regarded as a solid solution. For lower concentrations, however, a possible formation of clusters with different Fe/Cr ratio occurs as suggested by Mössbauer spectra.     

内圆外矩同轴线内TEM波的场结构及其特性阻抗

利用数值保角变换,研究内圆外矩同轴传输线内TEM波的场结构,利用软件MATLAB、HFSS绘制其场结构图,并给出特性阻抗的计算公式.研究结论对于计算该传输线的衰减常数、了解其功率容量、考虑功率耦合及设计有关的有源器件具有一定的参考价值.     

几何光学教学中关于变折射率材料问题的计算实例

针对大学光学课程中所讨论的成像问题均为"近轴近似"这一情形,指出为增强教学效果、提升学生对所学理论在实践上的信心,需对非近轴近似的一般化情形给予一定讨论;明确了直接从费马原理反解折射率变化规律的不可行性,采用近似办法,将变折射率的泛函问题转化为关于斜率的一维函数问题,利用欧拉方程进行分析,通过数值计算得出适合于材料制作的一组参考参数.     

Assessment of high-resolution methods for numerical simulations of compressible turbulence with shock waves

Flows in which shock waves and turbulence are present and interact dynamically occur in a wide range of applications, including inertial confinement fusion, supernovae explosion, and scramjet propulsion. Accurate simulations of such problems are challenging because of the contradictory requirements of numerical methods used to simulate turbulence, which must minimize any numerical dissipation that would otherwise overwhelm the small scales, and shock-capturing schemes, which introduce numerical dissipation to stabilize the solution. The objective of the present work is to evaluate the performance of several numerical methods capable of simultaneously handling turbulence and shock waves. A comprehensive range of high-resolution methods (WENO, hybrid WENO/central difference, artificial diffusivity, adaptive characteristic-based filter, and shock fitting) and suite of test cases (Taylor–Green vortex, Shu–Osher problem, shock-vorticity/entropy wave interaction, Noh problem, compressible isotropic turbulence) relevant to problems with shocks and turbulence are considered. The results indicate that the WENO methods provide sharp shock profiles, but overwhelm the physical dissipation. The hybrid method is minimally dissipative and leads to sharp shocks and well-resolved broadband turbulence, but relies on an appropriate shock sensor. Artificial diffusivity methods in which the artificial bulk viscosity is based on the magnitude of the strain-rate tensor resolve vortical structures well but damp dilatational modes in compressible turbulence; dilatation-based artificial bulk viscosity methods significantly improve this behavior. For well-defined shocks, the shock fitting approach yields good results.     

聚乙烯吡咯烷酮纳米银荧光增强测定番茄红素

合成了聚乙烯吡咯烷酮纳米银,研究了番茄红素对聚乙烯吡咯烷酮纳米银体系的荧光增强效应。考察了缓冲体系、纳米银用量、聚乙二醇浓度、反应时间和温度等因素的影响,建立了测定番茄红素的新方法。在最佳条件下,体系的相对荧光强度与番茄红素浓度呈良好的线性关系,其线性范围为2.0×10-6~8.0×10-5 mol/L,检出限为1.6×10-8 mol/L。方法应用于实际样品检测,回收率为98.29%~109.36%。     

Experiment on relationship between the magnetic gradient of low-carbon steel and its stress

In geomagnetic field, a series of tensile experiments on the low-carbon steel sticks were carried out. A special homemade detector was used to measure the magnetic gradient on the material surface. The results showed that the relationship between the magnetic gradient and the stress varied with different conditions of measurement. There was no obvious correlation between the magnetic gradient and the tensile stress if the sample remained on the material test machine. If the sample was taken off from the machine, the measured magnetic gradient was linear with the prior maximum stress. In Nanjing, PR China, a place of 32°N latitude, the slope of the linear relationship was about 67 (uT/m)/MPa. This offered a new method of non-destructive stress testing by measuring the magnetic gradient on the ferromagnetic component surface. The prior maximum applied stress of the sample could be tested by measuring the present surface magnetic gradient. Actually this phenomenon was the metal magnetic memory (MMM). The magnetic gradient near the stress concentration zone of the sample, the necking point, was much larger than other area. Thus, the hidden damage in the ferromagnetic component could be detected early by measuring the magnetic gradient distribution on its surface. In addition, the magnetic memory signal gradually weakened as the sample was taken off and laid aside. Therefore, it was effective for a given period of time to detect the stress or stress concentration based on the MMM testing.