Preparation of a silicon micro-strip nuclear radiation detector by a two-step annealing process

The annealing process for boron implantation is a crucial step during large size nuclear radiation detector fabrication. It can reduce the lattice defects and the projection straggling. A two-step annealing process for boron implantation was developed instead of a one-step annealing process, and the reverse body resistance of a silicon micro-strip detector was significantly increased, which means that the performance of the detector was improved.     

A study of the active thermal control for the high energy detector on the HXMT

A thermal control system (TCS) based on the resistance heating method is designed for the High Energy Detector (HED) on the Hard X-ray Modulation Telescope (HXMT). The ground-based experiments of the active thermal control for the HED with the TCS are performed in the ambient temperature range from -15 to 20 ℃ by utilizing the pulse width to monitor the interior temperature of a NaI(Tl) crystal. Experimental results show that the NaI(Tl) crystal's interior temperature is from 17.4 to 21.7 ℃ when the temperature of the PMT shell is controlled within (20±3) ℃ with the TCS in the interesting temperature range, and the energy resolution of the HED is maintained at 16.2% @ 122 keV, only a little worse than that of 16.0% obtained at 20 ℃. The average power consumption of the TCS for the HED with a low-emissivity shell is about 4.3 W, which is consistent with the simulation.     

A new analytical edge spread function fitting model for modulation transfer function measurement

We propose a new analytical edge spread function (ESF) fitting model to measure the modulation transfer function (MTF).The ESF data obtained from a slanted-edge image are fitted to our model through the non-linear least squares (NLLSQ) method.The differentiation of the ESF yields the line spread function (LSF),the Fourier transform of which gives the profile of two-dimensional MTF.Compared with the previous methods,the MTF estimate determined by our method conforms more closely to the reference.A practical application of our MTF measurement in degraded image restoration also validates the accuracy of our model.     

一种基于结构性改变的光子晶体光纤光栅理论研究

对一种新型基于结构性改变的光子晶体光纤光栅原理进行了研究.采用多极法分析了结构性改变对折射率的影响,得到有效折射率与包层气孔塌缩之间的关系,建立了结构性改变光子晶体光纤光栅模型.利用耦合模理论对所成光栅性能进行了分析,重点研究了包层空气孔层数、空气孔占空比、气孔塌缩程度对光栅谐振波长、带宽的影响.研究结果表明,光子晶体...     

用于光纤法布里-珀罗传感器腔长互相关解调的光楔的数学模型研究

光楔是实现光纤法布里-珀罗(F-P)传感器互相关解调的重要光学元件.根据互相关解调的原理分析了造成光楔和光纤F-P传感器F-P腔的反射光相位不同的因素,进而建立了光楔的干涉光强的数学模型,在此基础上对具有不同反射率的光楔的干涉光强进行了数值仿真,和相同反射率的光纤F-P传感器F-P腔的干涉光强对比之后建立了光楔的简化数...     

光栅减反层太阳能电池光电转换效率的研究

运用时域有限差分方法,研究了光栅减反层结构对太阳能电池光电转换效率及储能效果的影响.具体从光栅形状、高度以及光栅表面金属薄膜厚度出发.结果表明经光栅减反层优化表面结构的太阳能电池的光电转换效率显著增大,储能效果大大得到提升.尤其是三角形光栅太阳能电池.随着镀层厚度的增加,储能效果增加,但当薄膜厚度过厚时,储能效果反而降低.     

溶胶凝胶法制备Ti1-xFexO2纳米颗粒及磁性能研究

采用溶胶凝胶法制备了稀磁半导体Ti1-xFexO2(x=0～0.050)的纳米颗粒,在氩气氛围中以500℃对样品进行退火处理,并通过差热/热重综合热分析仪(TG-DTA)、X射线衍射仪(XRD)、拉曼光谱(Raman)分析了纳米颗粒的结构和相变温度.使用振动样品磁场计(VSM)测试了样品的磁性能.研究发现:经500℃氩...     

自然的改进型节点电压方程

通过对节点导纳矩阵的进一步分析,得出节点电压方程一种新的形式,用节点电压方程能够直观地从电路图直接绘制出信号流图而不需列写KCL,KVL和器件方程.类似的,通过圈阻抗矩阵的分析,也得到了新形式的圈电流方程.     

机载卫星制导武器直接瞄准攻击研究

 介绍了卫星制导武器直接瞄准攻击方式在对地精确打击中占据的关键位置,阐述了卫星制导武器直接瞄准攻击方法的原理。由于卫星制导武器直接瞄准攻击对目标定位要求较高,采用常用定位手段已不能满足系统对目标定位的要求,分析了使用相对GPS制导成为卫星制导武器直接瞄准攻击的关键的原因。相对GPS制导误差主要包括采用载机和武器相对GPS定位误差以及传感器对目标的相对定位误差,分别对两者的定位精度进行了分析和推导。仿真结果表明：这两者的综合误差理论值小于7.5 m,满足卫星制导武器在直接瞄准攻击中对目标定位的需求。     

基于Dual-Mode MMA+MDD双模式T/2分数间隔盲均衡算法的研究

均衡技术是用来解决通信系统中码间干扰的常用方法.针对传统恒模算法的收敛速度和稳态剩余码间干扰大的缺点,将双模式多模算法和改进型判决引导算法结合起来,并且应用于分数间隔盲均衡器中.该算法初期用双模式算法收敛均衡器,然后切换到改进型判决引导算法中进一步收敛,由于分数间隔均衡器解决了波特间隔均衡器因抽样率不高带来的频谱混叠问...