婴幼儿奶瓶中迁移双酚A的高效液相色谱-电喷雾串联质谱检测方法研究

建立了婴幼儿奶瓶中双酚A(BPA)迁移量的高效液相色谱-电喷雾串联质谱(HPLC-ESI-MS/MS)测定方法。奶瓶食品模拟浸泡液经过弗罗里硅土玻璃层析柱净化,高效液相色谱分离,采用选择反应性监测模式(SRM)检测。以一级质谱得到的准分子离子m/z 227作为母离子,进行二级质谱(MS2)分析。选择MS2的碎片离子m/z 212、133、93定性确证,m/z 212作为定量离子定量。实验优化了质谱条件,并对二级质谱碎裂机理和特征离子进行了研究。测定结果的相对标准偏差不大于8.2%(n=7),回收率在87.7%～105%之间;检出限为2μg/L,能够满足欧盟、美国等对奶瓶中双酚A的限制要求。该法已成功应用于婴幼儿奶瓶中BPA迁移量的测定。     

基于有机羧酸配体的Co(Ⅲ)/Cu(Ⅱ)配合物的合成、结构及表征

在溶剂热条件下,以含卤素有机羧酸3-溴-吡啶-2,6-二甲酸(H₂L)为配体,以硝酸钴、硝酸铜为金属源,合成了两例配合物:[Co(L′)₃](1)和[Cu(L′)₂]_n(2)(HL′=5-溴-吡啶-2-甲酸),通过元素分析(EA)、X射线单晶衍射(SXRD)、X射线粉末衍射(PXRD)、红外光谱(IR)和热重分析(TGA)进行结构表征。X射线单晶衍射结果表明,配体H₂L在反应过程中发生脱羧现象,生成单羧酸配体5-溴-吡啶-2-甲酸。在配合物1中,每个Co(Ⅲ)都位于略微扭曲的八面体几何构型中,不对称单元中含有两个单核单元,单核单元通过C—H…O氢键形成三维超分子结构。配合物2的不对称单元中含有一个Cu(Ⅱ),两个脱质子的L′^-配体,每个Cu(Ⅱ)都是六配位的,位于扭曲的八面体几何构型中。Cu(Ⅱ)由配体连接生成1D链结构,通过C—H…O氢键形成三维超分子结构。此外,研究了两例配合物的热稳定性能。     

A Terbium Metal–Organic Framework for Highly Selective and Sensitive Luminescence Sensing of Hg2+ Ions in Aqueous Solution

A series of isomorphic lanthanide metal–organic frameworks (MOFs) Ln(TATAB)?(DMF)₄(H₂O)(MeOH)_0.5 (LnTATAB, Ln=Eu, Tb, Sm, Dy, Gd; H₃TATAB=4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoic acid) have been solvothermally synthesized and structurally characterized. Among these MOFs, TbTATAB exhibits good water stability and a high fluorescence quantum yield. Because mercury ions (Hg²⁺) have a high affinity to nitrogen atoms, and the space between multiple nitrogen atoms from triazine and imino groups is suitable for interacting with Hg²⁺ ions, TbTATAB shows highly selective and sensitive detection of Hg²⁺ in aqueous solution with a detection limit of 4.4 nm . Furthermore, it was successfully applied to detect Hg²⁺ ions in natural water samples.     

Electroless plating of copper on Si(100) surfaces modified by surface‐initiated atom‐transfer radical polymerization of 4‐vinylpyridine

Surface‐initiated atom‐transfer radical polymerization (ATRP) of 4‐vinylpyridine (4VP) on a pretreated Si(100) surface was carried out. The composition and topography of the Si(100) surface modified by poly(4‐vinylpyridine) (P4VP) were characterized by XPS and atomic force microscopy (AFM), respectively. The P4VP layer on the Si(100) surface was used not only as chemisorption sites for the palladium complexes without prior sensitization by SnCl₂ solution during the electroless plating, but also as an adhesion promotion layer for the electrolessly deposited copper. The electrolessly deposited copper on the Si–P4VP surface exhibited a 180° peel adhesion strength above 6 N/cm. The adhesion strength was much higher than that of the electrolessly deposited copper to the pristine silicon surface. Copyright © 2008 John Wiley & Sons, Ltd.     

High-performance thin-film Li4Ti5O12 electrodes fabricated by using ink-jet printing technique and their electrochemical properties

Li₄Ti₅O₁₂ thin-film anode with high discharge capacity and excellent cycle stability for rechargeable lithium ion batteries was prepared successfully by using ink-jet printing technique. The prepared Li₄Ti₅O₁₂ thin film were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, cyclic voltammograms, and galvanostatic charge–discharge measurements. It was found that the average thickness of 10-layer Li₄Ti₅O₁₂ film was about 1.7~1.8 μm and the active material Li₄Ti₅O₁₂ in the thin film was nano-sized about 50–300 nm. It was also found that the prepared Li₄Ti₅O₁₂ thin film exhibited a high discharge capacity of about 174 mAh/g and the discharge capacity in the 300th cycle retained 88% of the largest discharge capacity at a current density of 10.4 μA/cm² in the potential range of 1.0–2.0 V.     

Lipid diffusion in giant unilamellar vesicles is more than 2 times faster than in supported phospholipid bilayers under identical conditions

The lateral diffusion coefficients of a BODIPY tail-labeled lipid in two model systems, namely, free-standing giant unilamellar vesicles (GUVs) and supported phospholipid bilayers (SPBs), were determined by fluorescence correlation spectroscopy (FCS) using the Z-scan approach. For the first time, the performed measurements on 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayers maintain exactly the same experimental conditions for both systems, which allows for a quantitative comparison of lipid diffusion in these two commonly used model membranes. The results obtained revealed that the lipid mobility in free-standing bilayers (D=7.8+/-0.8 microm2 s-1) is significantly higher than in the bilayer created on the solid support (mica) (D=3.1+/-0.3 microm2 s-1).     

Neutrino Production via e-e+ Collision at Z-Boson Peak

The production of the three normal neutrinos via e^-e⁺ collision at Z-boson peak (neutrino production in a Z-factory) is investigated thoroughly. The differences of v_e-pair production from v_μ-pair and v_τ-pair production are presented in various aspects. Namely the total cross sections, relevant differential cross sections and the forward-backward asymmetry etc. for these neutrinos are presented in terms of figures as well as numerical tables. The restriction on the room for the mixing of the three species of light neutrinos with possible externals (heavy neutral leptons and/or sterile neutrinos) from refined measurements of the invisible width of Z-boson is discussed.     

基于586-Driver的无人机飞控计算机智能检测系统研制

传统飞控计算机检测方法以人工操作为主,存在一定的主观性且效率低下的缺点。采用信号门限检测技术,设计了飞控计算机一键式全功能检测方案。以586-Driver板卡为核心,设计了智能检测系统,实现了在全程无人干预情况下对飞控计算机按预设时序逻辑的自动检测。通过系统测试表明：满足某型飞控计算机的检测需求,提高了飞控计算机检测效率,具有实际工程应用价值。     

RIBLL2上放射性次级束粒子鉴别能力的提升

为了提升兰州重离子加速器冷却存储环(HIRFL-CSR)中放射性次级束流装置(RIBLL2)的粒子鉴别能力,在其F1色散面上研发、安装了一套可测量核反应产物起始时间和位置等信息的新型高性能探测器,并发展了一种利用测量的位置及飞行时间等实验数据提取束线光学参数从而修正粒子磁刚度的实验方法。使用F1色散面上的新型探测器,再结合粒子磁刚度修正方法,首次在RIBLL2-ETF分离器上实现了全动量接收度下300 MeV/nucleon 78Kr弹核碎裂产物的清楚鉴别,结果显示:对于较重的75As33+,其电荷分辨σ_Z~0.19、质核比分辨σ_A/Z~5.8×10?3。这一结果,有效提升了RIBLL2粒子鉴别能力,增加了奇异核收集效率,使研究范围由低质量核区(A<40)拓展到了中等质量核区(A~80),这将有效促进RIBLL2上放射性次级束物理实验的发展。