Oxidations of 4- and 3-Aminopyridinepentaammineruthenium(ii) Complexes by Ethylenediaminetetraacetatocobaltate(III)

Redox reactions of Co(edta)^? with Ru(NH₃)₅L²⁺ (L = 3- and 4-aminopyridine (AmPy)) were found to follow an outer-sphere electron transfer mechanism. The specific rate constants are (3.26 ± 0.03) × 10² and (3.07 ± 0.04) × 10₃ M^?1S^?1, for L = 3- and 4-AmPy, respectively, at μ, = 0.10 M LiClO₄, pH = 8.0 (tris) and T = 25 °C. The rate constants of oxidations for a series of Ru(NH₃)₅L²⁺ complexes are higher than those of the corresponding Fe(CN)₅L_3- complexes by factors of 4 to 15 even after corrections for differences in reduction potentials and in charges of the complexes. Nonadiabaticity in the reactions of Fe(CN)₅L3 complexes may account for the difference in the relative reactivities.     

Synthesis of 4H-Pyrrolo[2,1-C][1,4]benzothiazines and 3-(Methylthio)oxindoles

The Pummerer reaction was carried out with α-acylsulfides and phenyl iodosyl bis(trifluoroacetate) instead of α-acylsulfoxides to prepare 4H-pyrrolo[2,1-c][1,4]benzothiazines and 3-(methyIthio)oxindoles.     

氯代(对位取代四苯基)卟啉铁(Ⅲ)的轴向配位反应热力学及光谱研究

本文对二氯甲烷溶剂中咪唑(Im)与氯代(对位取代四苯基)卟啉铁(Ⅲ)[Fe(p-X)TPPCl,X=Cl,H,CH₃,OCH₃]的轴向配位反应(1)进行了研究.用光谱法测得了反应(1)的平衡常数,并对反应物和产Fe(p-X)TPPCl+2Im⇔[Fe(p-X)TPPIm₂]⁺Cl^-物的电子光谱、FeHTPPCl和[FeHTPPIm₂]⁺Cl^-的电子自旋共振谱和穆斯堡尔谱进行了测量.研究了取代基效应和轴向配体的影响.     

用手性高效液相色谱对β—羟基酯化合物进行对映体分离

本文利用手性ＯＤ柱在高效液相色谱上对光活性β－羟基酯类化合物进行了对映体分离，达到了较好的分离效果，并通过讨论手性ＯＤ涂附物的结构与该类化合物的作用方式，解释了不同的该类化合物的色谱分离效果。     

Synthesis and Mesogenic Properties of Liquid Crystals Containing Terminal Cyclohexylmethanol,Cyclopentylmethanol, Cyclobutylmethanol and Cyclopropylmethanol Moiety

Four series of compounds 11?50 containing terminal alicyclic rings such as cyclohexylmethyl, cyclopentylmethyl, cyclobutylmethyl, and cyclopropylmethyl rings were synthesized and their liquid crystal behavior studied. The ring size and the length of flexible alkoxy chain influence the phase formation in different ways. While the smaller ring and the shorter alkoxy chain tend to favor the formation of the N phase, the larger ring and the longer alkoxy chain tend to favor the formation of the SmC phase. All the compounds except 11 and 21 exhibit SmA phases. The widest temperature range of the N, SmA, and SmC phases are found in the compounds 41 , 46 , and 20 , respectively, which are 75 °C for 41 , 115 °C for 46 , and 100 °C for 20 .     

Capillary electrophoresis with field-enhanced stacking for rapid and sensitive determination of strychnine and brucine

A new capillary electrophoresis procedure with field-enhanced stacking concentration for the analysis of strychnine and brucine is established. After optimization of the separation and concentration conditions, the two alkaloids can be separated within 5 min and quantified with high sensitivity (The detection limits were 1.0 ng mL(-1) for strychnine and 1.4 ng mL(-1) for brucine). The method was useful for qualitative and quantitative analysis of strychnine and brucine in Strychnos nux-vomica L with recovery of 105.1% for strychnine and 98.4% for brucine.     

稀土变质热锻模具铸钢高温磨损性能的研究

研究了稀土（RE）变质热锻模具铸钢的高温磨损性能，并与热锻模具钢H13钢和3Cr2W8V钢进行对比，探讨了稀土元素的作用和热锻模具铸钢的高温磨损机理。结果表明：随着RE加入量的增加，热锻模具铸钢的磨损率先减后增，RE加入量在质量分数为0．05％时热锻模具铸钢具有最佳的高温磨损性能。RE变质热锻模其铸钢的高温耐磨性明最高于H13钢和3Cr2W8V钢。高温磨损机理为氧化磨损和氧化物的疲劳剥落，磨屑为块状的Fe2O3和Fe3O4。     

Simultaneous determination of cefazolin in rat blood and brain by microdialysis and microbore liquid chromatography

A sensitive microbore liquid chromatographic method combined with the minimally invasive technique of microdialysis was devised for simultaneously and continuously monitoring the levels of unbound blood and brain cefazolin in rats. Microdialysis probes were inserted into the jugular vein and brain striatum for blood and brain sampling, respectively. Chromatographic conditions consisted of a mobile phase of methanol-acetonitrile-100 mM monosodium phosphoric acid (20:10:70, v/v, pH 4.5) pumped through a microbore reversed-phase column at a flow rate of 0.05 mL/min. The ultraviolet detection wavelength was set at 270 nm. An on-line design allowed direct and continuous analysis of protein-free samples in the dialysate. Microdialysis probes, being home-made, were screened for acceptable in vivo recovery. Chromatographic resolution and detection were validated for response linearity as well as intra-day and inter-day variabilities. This method was then applied to pharmacokinetic profiling of protein unbound cefazolin in both the blood and brain following intravenous administration (10 mg/kg, i.v., n = 6). Rapid appearance of cefazolin in the rat brain striatal dialysate following drug injection suggested good blood-brain barrier penetration. According to a non-compartmental pharmacokinetics model, the area under the concentration (AUC) vs time ratio of cefazolin in rat brain and blood was 6%.     

应用普通扫描仪作薄层色谱定量分析的初步研究

尝试应用普通扫描仪作薄层色谱定量分析。样品通过硅胶板层析展开后，用碘蒸汽显色，再用普通扫描仪记录其图像，通过图像分析技术计算出斑点中样品的量。结果表明，对油醇、油酸、月桂胺和焦谷氨酸油酯等长碳链有机化合物，样点在nmol级的范围内时计算量与实际量有良好的线性相关性。     

Automation for continuous analysis on microchip electrophoresis using flow-through sampling

Automation of electrophoretic microchips for sequential analysis of different samples is demonstrated. This system used an autosampler, which was on-line connected to the microchip and the whole process including sample loading and injection, analysis and data acquisition as well as washing were all automated. Rhodamin B at different concentrations was first loaded into a hydrodynamic flow stream by an autosampler, delivered to the microchip, and then sequentially injected into the electrophoretic microchannel for analysis and detection. Automation was achieved by running two independent programs, one for sample loading by an autosampler and the other one for electrophoretic injection by voltage switching, on the same computer. Using this sampling chip, each loaded volume (0.2-1 microL) can be injected for dozens of electrophoretic analyses (1-10 nL for each injection). The variances caused by the external connections, which did not affect the electrophoretic analysis but would cause band broadening of the loaded sample in the hydrodynamic flow stream, were theoretically deduced. Results indicate that the dead volume (approximately 300 nL) due to the connection fitting on the chip could lead to dilution of the loaded sample by a factor of one when 0.2 microL of sample was loaded. Such a design allows sequential analysis of a series of samples while the running buffer is continuously pumped into the connection capillary as well as microchannels for washing between two loaded samples to minimize cross contamination without human intervention. Using this sampling chip, the required sample amount and handling time can be greatly reduced compared to the manual method.