单取代芳烃对位选择性碳氢活化反应研究

以单取代芳烃为芳基化试剂,以羰基为导向定位基团,研究了单取代芳烃对位选择性与芳香酮的交叉脱氢偶联反应。该方法的高选择性一方面体现在用作芳基化试剂的单取代芳烃能够单一选择性地发生对位碳氢活化,并生成对位取代产物;另一方面,作为弱导向基团的羰基具有优异的邻位导向定位作用,高选择性地发生羰基邻位碳氢键活化。此外,该方法还具有反应条件温和、反应效率高、底物范围广、氧化剂廉价易得等优点,为对位取代联芳基化合物的合成提供了一条切实可行的途径。     

船舶水下减阻抗污涂层的研究综述

船舶由于在航行时受到各种阻力,消耗了大量能量,增加了航行成本。船舶水下阻力的来源可以大致分为船体阻力和生物质附加阻力。本文基于对阻力和生物质黏附形成过程的分析,介绍了水下减阻领域的进展突破,总结了具有减阻、抗污性质的涂层研究情况,从超疏水、超亲水减阻材料和自抛光防污涂料、低表面能抗黏附材料、防污剂等方面,对其中相关的科学问题和解决方法进行了综述。     

Characterization and properties of plywood bioadhesive derived from cottonseed protein and sawdust cellulose

Cellulose - The development of plant adhesive with good bonding strength, water resistance and thermal stability remains challenging to replace formaldehyde-based adhesive resins that usually...     

PtRuAgCoNi高熵合金纳米颗粒高效电催化氧化5-羟甲基糠醛

5-羟甲基糠醛(HMF)的电催化氧化被认为是合成2,5-呋喃二甲酸(FDCA)最环保、经济和有效的方法之一,它可作为聚呋喃二甲酸乙二醇酯(PEF)的生物基前体。在这项工作中,我们通过低温溶剂热法合成了PtRuAgCoNi高熵合金纳米颗粒,并在不改变颗粒结构和组成的情况下进行了简易的处理以去除表面活性剂。负载在碳载体上的合金纳米催化剂无论是否含有表面活性剂在HMF电催化氧化为FDCA的过程中都表现出比商业Pt/C更好的催化性能。且表面活性剂的去除可以进一步提高其电催化性能,表明高熵合金纳米粒子在电催化和绿色化学中具有广阔的应用前景。     

“Ghost peaks” of olmesartan medoxomil: Two solution degradation products of olmesartan medoxomil via oxidation mediated by metal ions

Two unknown solution degradants were found during the dissolution testing in 0.1-M HCl for olmesartan medoxomil (OLM) tablets. The structure of the degradants was identified and characterized by liquid chromatography–ultraviolet (LC–UV), liquid chromatography with tandem mass spectrometry (LC–MS/MS), and nuclear magnetic resonance (NMR) and demonstrated to be cyclization of tetrazole and benzene in the olmesartan (OL) and OLM structures. A series of studies including stress studies, simulation studies, and mechanism-based studies were performed to reveal the potential mechanisms that lead to the formation of the unknown degradants. The study results demonstrated that the degradation was catalyzed with radicals that originated from the metal ions leached from the inner surface of high-performance liquid chromatography (HPLC) glass vials with dissolved oxygen under acidic condition. Prerinsing the glass vials with acidic solution dissolved with EDTA can effectively avoid the generation of such oxidative impurities. The present work provides new insights into the understanding of degradation pathways of OLM, which might support the development of OLM tablets.     

Synthesis of dual pH- and temperature-sensitive poly(N-isopropylacrylamide-co-acrylic acid)/sewage sludge ash hydrogel with the simultaneously high performance of swelling and deswelling

An advanced dual pH- and temperature-sensitive hydrogel (NASH2.5) was optimally synthesized through modification of N-isopropylacrylamide (NIPAM) hydrogel with introducing 5 mol% acrylic acid (AA) and 2.5 wt% sewage sludge ash (SSA). The swelling kinetic results showed that NASH2.5 exhibited both high equilibrium swelling ratio and swelling rate, which was attributed to the higher porous structure as shown in scanning electron microscope, and the more hydrogen bonding formed inside of the hydrogel as investigated in Fourier transform infrared spectrometer. In addition, its curve was better fitted to the pseudo-second-order model, indicating that the water absorption process was dominated by chemisorption through forming the hydrogen bonding among the water molecules and carboxyl/silanol groups of the hydrogel. Compared with the pure NIPAM hydrogel, the water transport mechanism switched from Case I diffusion to Case II diffusion by introduction of AA and further SSA. Furthermore, through the results of the deswelling kinetics in pH value change (from 9 to 4 and 2, respectively), temperature value change (from 25 to 40, 50, and 60°C, respectively), and dual pH and temperature values changes, NASH2.5 not only presented a high pH sensitivity, but also showed high sensitive to temperature by achieving high water recovery ratio in rapid dehydrated rate. Therefore, the dual stimuli-sensitive hydrogel with the simultaneously high performance of swelling and deswelling would provide a suitable alternative for specific applications such as pollutant adsorption.     

Insight mechanism of nano iron difluoride cathode material for high-energy lithium-ion batteries: a review

Journal of Solid State Electrochemistry - Iron(II) fluoride (FeF2) is a promising candidate as the cathode material for lithium-ion batteries (LIBs) due to its quite high theoretical energy density...     

Chemistry-Performance Relationships of Polymer Gel-Electrolytes for Mg−S and Li−S Batteries: Influence of Network Cation Solvation Capacity on Polymer-Polysulfide Interactions

Metal-sulfur batteries are a promising next-generation energy storage technology, offering high theoretical energy densities with low cost and good sustainability. An active area of research is the development of electrolytes that address unwanted migration of sulfur and intermediate species known as polysulfides during operation of metal-sulfur batteries, a phenomenon that leads to low energy efficiency and short life-spans. A particular class of electrolytes, gel polymer electrolytes, are especially attractive for their ability to repel polysulfides on the basis of structure, electrostatics, and other polymer properties. Herein, within the context of magnesium- and lithium-sulfur batteries, we investigate the impact of gel polymer electrolyte cation solvation capacity, a property related to network dielectric constant and chemistry, on sulfur/polysulfide-polymer interactions, an understudied property-performance relationship. Polymers with lower cation solvation capacity are found to permanently absorb less polysulfide active material, which increases sulfur utilization for Li−S batteries and significantly increases charge efficiency and life-span for Li−S and Mg−S batteries.     

Enhanced stability designs of cell membrane chromatography for screening drug leads

Cell membrane chromatography is an effective method for screening bioactive components acting on specific receptors in complex systems, which maintains the biological activity of the membrane receptors and improves screening efficiency. However, traditional cell membrane chromatography suffers from poor stability, resulting in a limited life span and low reproducibility, greatly limiting the application of this method. To address this problem, cyanuric chloride-decorated silica gel was used for the covalent immobilization of the cell membranes. Cyanuric chloride reacts with amino groups on the cell membranes and membrane receptors to form covalent bonds. In this way, the cell membranes are not easy to fall off. The column life of the cyanuric chloride-decorated epidermal growth factor receptor/cell membrane chromatography column was extended to more than 8 days, whereas the column life of the normal cell membrane chromatography column dropped sharply in the first 3 days. A cyanuric chloride-decorated epidermal growth factor receptor/cell membrane chromatography online HPLC-IT-TOF-MSn system was applied for screening drug leads from Trifolium pratense L. One potential drug lead, formononetin, which acts on the epidermal growth factor receptor, was screened. Our strategy of covalently immobilizing cell membrane receptors also improved the stability of cell membrane chromatography.     

基于“透过表面接枝”方式制备低分散性和高接枝密度聚合物刷的研究

"透过表面接枝"(grafting-through)是一种聚合物表面改性的新方法,可以显著改善传统grafting-from和grafting-to方法接枝工艺的缺陷,获得兼具高接枝密度和低分散性的聚合物刷产物.本文采用布朗动力学模拟方法,模拟研究了grafting-through方法接枝聚合物刷过程中的主控因素,从微观动力学角度阐明其特有的链增长趋同化效应是保持产物聚合物刷较低分散性的主因.引发效率在grafting-through中可显著提高,且产物聚合物刷的分子量呈现泊松分布.此外,反应中保持高的单体通量,可以同时实现产物聚合物较长的平均链长和较低的分散性,有利于制备性能优异的改性材料.该研究对深入理解grafting-through接枝过程的动力学主控因素,促进grafting-through技术的推广和工艺的改进具有一定的理论指导意义.