A reliable ab initio potential energy surface and vibrational states for the ground electronic state of HgH2(X1Sigma+g)

A three-dimensional global potential energy surface for the ground (X (1)Sigma(+)(g))electronic state of HgH(2) is constructed from more than 13,00 ab initio points. These points are generated using an internally contracted multireference configuration interaction method with the Davidson correction and a large basis set. Low-lying vibrational energy levels of HgH(2), HHgD, and HgD(2) calculated using the Lanczos algorithm are found to be in good agreement with the available experimental band origins. The majority of the vibrational energy levels up to 9000 cm(-1) are assigned with normal mode quantum numbers. Our results indicate a gradual transition for the stretching vibrations from the normal mode regime at low energies to the local mode regime near 9000 and 8000 cm(-1) for HgH(2) and HgD(2), respectively, as evidenced by a decreasing energy gap between the (0,0,n(3)) and (1,0,n(3)-1) vibrational states and bifurcation of the corresponding wave functions.     

Purification of adipoyl-7-amino-3-deacetoxycephalosporanic acid from fermentation broth using stepwise elution with a synergistically adsorbed modulator

Multicomponent adsorption data of a fermentation broth containing adipoyl-7-amino-3-deacetoxycephalosporanic acid (adipoyl-7-ADCA), a cephalosporin precursor for 7-ADCA, and two key impurities, alpha-hydroxyadipoyl-7-ADCA and alpha-aminoadipoyl-7-ADCA were obtained from batch equilibrium and frontal chromatography tests. Amberlite XAD-1600 was chosen as the resin. A rate model was applied to simulate the chromatograms. An alkaline buffer, which by itself has no affinity for the resin, was used as the eluent. The widely used reversed-phase modulator model is inaccurate in explaining the stepwise elution data. A new model, the induced competition model, has been developed to account for apparent retention of the buffer in the presence of adsorbed species. Close agreement between the simulations and the data was achieved with the new model.     

3D H-bonding networks self-assembly from pyridinium derivatives and bis(maleonitriledithiolato)zincate(II)

The two ion-pair complexes, [pyH]₂[Zn(mnt)₂] (1) and [4,4′-bipyH₂]-[Zn(mnt)₂] (2), were synthesized, where mnt²⁻ denotes maleonitriledithiolate, and [pyH]⁺, [4,4′-bipyH₂]²⁺ represent pyridinium and diprotonated 4,4′-bipyridinium, respectively. Their single crystal structures show that there are strong bifurcated H-bonding interactions between the cations of the pyridinium derivative and the [Zn(mnt)₂]²⁻ anions in both 1 and 2. The bifurcated H-bonding interactions between the N–H of the pyridiniums and the CN groups of the mnt²⁻ ligands give rise to a 2D layered H-bonding network, the adjacent layers come together in such way as mutual embrace to give a tight pack, thus 2D hydrogen-bonding sheets further develop into 3D H-bonding networks through weak C–HS and ππ stacking interactions in 1. As for 2, the cations and anions connect into several types of H-bonding macrorings ([2+2], [3+3] and [4+4]), these H-bonding macrorings fuse to extend into 2D layered structure, the interpenetration between [3+3] and [4+4] type H-bonding macrorings in the adjacent layers give further rise to novel 3D extended H-bonding networks, in which there are clearly parallel stacks of cations and the chelate rings of anions.     

Palladium salicylaldimine complexes containing boronate esters

Reactions of salicylaldehydes with boronate ester derivatives of aniline have been examined. Addition of these Schiff base ligands to palladium acetate or Na₂PdCl₄ afforded novel boron-containing trans-bis(N-arylsalicylaldiminato) palladium complexes.Condensation of salicylaldehyde (2-HOC₆H₄C(O)H) with H₂NC₆H₄Bpin (pin=1,2-O₂C₂Me₄) afforded the boron-containing Schiff bases, 2-HOC₆H₄C(H)=NC₆H₄Bpin (1–3a). Similar reactivity with 2-hydroxy-5-nitrobenzaldehyde and 2-hydroxy-1-naphthaldehyde gave the corresponding Schiff bases (1-3b) and (1-3c), respectively. Reaction of Schiff bases (2) and (3) with palladium acetate or Na₂PdCl₄ afforded complexes of the type PdL₂ (4,5), where L=deprotonated Schiff base. The molecular structure of the nitro-salicylaldehyde 4-Bpin palladium complex (5b) was characterized by an X-ray diffraction study. All new palladium compounds have been characterized fully and tested for their antifungal activity against Aspergillus niger and Aspergillus flavus.     

Rapid separation of phenylthiohydantoin amino acids: ambient pressure ion-mobility mass spectrometry (IMMS)

An electrospray ionization (ESI) ambient pressure ion-mobility spectrometer (APIMS) interfaced to an orthogonal reflector time-of-flight mass spectrometer (TOFMS) was evaluated for the first time as a detector for the identification of phenylthiohydantoin (PTH)-derivatized amino acids, the final products in the Edman sequencing process of peptides and proteins. The drift and flight times of the twenty common PTH amino acids were characterized by a well-defined 2-D mobility/mass spectral pattern. The combination of mobility/mass modes of analysis gave rise to a unique trend-line formation for the series of PTH amino acids. In addition, each PTH amino acid had a unique reduced mobility constant K(o), thus enabling the differentiation of all the amino acid derivatives including the PTH-leucine and PTH-isoleucine isomers. More importantly it was shown that it was possible to resolve a complete reference mixture of PTH amino acids in a single experimental run in less than 1 min. Detection limits for the PTH amino acids were found to range from 1.04 to 3.52 ng; indicating that the limits of detection were less than 17.0 pmol for all of the PTH amino acids.     

Synthesis,crystal structure and luminescent property of a novel H<Subscript>2</Subscript>O-bridged cobalt(II) polymer with one-dimensional chain structure

The coordination compound [Co(C₁₀H₇COO)₂(H₂O)₃]_2n · 4nH₂O was prepared by the reaction of 1-naphthoic acid and cobalt(II) acetate tetrahydrate in basic solution, and was fully characterized by X-ray diffraction, element analysis, FTIR, TG-DTA and luminescent spectra. In the crystal the six-coordinated Co(II) centers are linked into one-dimensional zigzag chains by water molecules, which are further assembled into a two-dimensional network through weak inter-chain C–H···π interactions. The solid complex exhibits favorable fluorescent properties similar to those of free ligand at room temperature, which can be assigned to the intraligand electronic transfer.     

Conversion of 3-benzoyl-1-methyl-4-phenyl-γ-piperidol by arylamines and arylhydrazines. Synthesis of 3-arylamino-1-oxo-1-phenylpropanes and 1,3-diarylpyrazoles and their fragmentation under electron impact

It has been established that on heating, 3-benzoyl-4-hydroxy-1-methyl-4-phenylpiperidine is ring-opened in the presence of arylamines by a type of retroaldol reaction, with subsequent transamination of the intermediate Mannich base and the formation of 3-arylamino-1-oxo-1-phenylpropanes. When using arylhydrazines this γ-piperidol is recyclized with the formation of 1,3-diarylpyrazoles and their 4,5-dihydro derivatives. The mass spectral behavior of a series of 3-arylamino-substituted 1-phenylpropanones has been studied. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1486–1495, October, 2007.     

The Effect of Alkane Chain Length on the Liquid–Liquid Critical Temperatures of Oligostyrene/Linear-Alkane Mixtures

Summary. Upper critical solution temperatures (UCSTs) for liquid–liquid demixing in a set of mixtures of linear alkanes (pentane (N ₁=5) to pentacontane (N ₁=50)) with an oligostyrene (1241amu, N ₂=12) are reported. We find strong correlation between the Hildebrand solubility parameters of the alkanes and the UCST. Correlations are developed which enable predictions concerning the miscibility of mixtures of compounds with longer chains.     

Hypervalency avoided: simple substituted BrF3 and BrF5 molecules. Structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF2 and HBrF4

Five different pure density functional theory (DFT) and hybrid Hartree-Fock/DFT methods have been used to search for the molecular structures, thermochemistry, and electron affinities of the bromine hydrogen fluorides HBrF(n)/HBrF(n)(-) (n = 2, 4). The basis sets used in this work are of double-zeta plus polarization quality in conjunction with s- and p-type diffuse functions, labeled as DZP++. Structures with Br-F and Br-H normal bonds, that is, HBrF(2)/HBrF(2)(-) with C(2v) or C(s) symmetry and HBrF(4)/HBrF(4)(-) with C(4v) or C(s) symmetry, are genuine minima. However, unlike the original BrF(3) and BrF(5) molecules, the global minima for HBrF(n)/HBrF(n)(-) (n = 2, 4) species are predicted to be complexes, some of which contain hydrogen bonds. The demise of the hypervalent structures is due to the availability of favorable dissociation products involving HF, which has a much larger dissociation energy than F(2). Similar reasoning suggests that PF(4)H, SF(3)H, SF(5)H, ClF(2)H, ClF(4)H, AsF(4)H, SeF(3)H, and SeF(5)H will all be hydrogen bond structures incorporating diatomic HF. The most reasonable theoretical values of the adiabatic electron affinities (EA(ad)) are 3.69 (HBrF(2)) and 4.38 eV (HBrF(4)) with the BHLYP method. These electron affinities are comparable to those of the analogous molecules: Br(2)F(n), ClBrF(n), and BrF(n)(+1) systems. The first F-atom dissociation energies for the neutral global minima are 60 (HBrF(2)) and 49 kcal/mol (HBrF(4)) with the B3LYP method. The first H-atom dissociation energies for the same systems are 109 (HBrF(2)) and 116 kcal/mol (HBrF(4)). The large Br-H bond energies are not sufficient to render the hypervalent structures energetically tenable. The dissociation energies for the complexes to their fragments are relatively small.     

Experiments in Solving Mixed Integer Programming Problems on a Small Array of Transputers

The time-consuming process of solving large-scale Mixed Integer Programming problems using the branch-and-bound technique can be speeded up by introducing a degree of parallelism into the basic algorithm. This paper describes the development and implementation of a parallel branch-and-bound algorithm created by adapting a commercial MIP solver. Inherent in the design of this software are certain ad hoc methods, the use of which are necessary in the effective solution of real problems. The extent to which these ad hoc methods can successfully be transferred to a parallel environment, in this case an array of at most nine transputers, is discussed. Computational results on a variety of real integer programming problems are reported.