室温以上磁制冷材料La(Fe1-xCox)11.7Al1.3化合物的研究

通过X射线衍射分析和超导量子干涉磁强计（SQUID）磁性测量,研究了Co替代Fe含量对居里温度在室温以上的磁制冷材料La（Fe1-xCox）11.7Al1.3（x=0.072,0.081）磁结构和磁性能的影响。La（Fe1-xCox）11.7Al1.3材料的居里温度随Co的含量增加而增加,La（Fe0.919Co0.081）11.7Al1.3的居里温度为311 K。当外场变化为1.9 T时磁熵变达到3.6 J·kg^-1·K^-1,RCP值为168.6 J·kg^-1,虽然它的磁熵变小于具有巨磁熵变的磁制冷材料,但是它在磁场为1.9 T时的制冷能力与这些材料相当。     

Flocculation and coalescence of droplets in oil-in-water emulsions formed with highly hydrolysed whey proteins as influenced by starch

The effects of added unmodified amylopectin starch, modified amylopectin starch and amylose starch on the formation and properties of emulsions (4 wt.% corn oil) made with an extensively hydrolysed commercial whey protein (WPH) product under a range of conditions were examined. The rate of coalescence was calculated based on the changes in the droplet size of the emulsions during storage at 20 degrees C. The rates of creaming and coalescence in emulsions containing amylopectin starches were enhanced with increasing concentration of the starches during storage for up to 7 days. At a given starch concentration, the rate of coalescence was higher in the emulsions containing modified amylopectin starch than in those containing unmodified amylopectin starch, whereas it was lowest in the emulsions containing amylose starch. All emulsions containing unmodified and modified amylopectin starches showed flocculation of oil droplets by a depletion mechanism. However, flocculation was not observed in the emulsions containing amylose starch. The extent of flocculation was considered to correlate with the rate of coalescence of oil droplets. The different rates of coalescence could be explained on the basis of the strength of the depletion potential, which was dependent on the molecular weight and the radius of gyration of the starches. At high levels of starch addition (>1.5%), the rate of coalescence decreased gradually, apparently because of the high viscosity of the aqueous phase caused by the starch.     

Crystallization behavior and micelle formation of star-shaped amphiphilic block copolymer based on dendritic poly(ether-amide)

The star-shaped amphiphilic block copolymer (DPEA-PCL-PEG) was prepared through ring opening polymerization of ε-caprolactone (CL) initiated by hydroxyl end-capped dendritic poly(ether-amide) (DPEA-OH), then coupling with monomethoxy-terminated poly(ethylene-glycol) (PEG) via an esterification process. The molecular structure was verified by FT-IR, ¹H NMR and gel permeation chromatography (GPC). The number average molecular weight of the PCL arm was calculated to be about 1910 g mol⁻¹ by ¹H NMR analysis. The number average molecular weight of the copolymer was determined to be 74,020 with the molecular weight distribution of 1.15 by GPC. The DSC and X-ray diffraction analysis indicated that the copolymer possesses double melting and crystallization peaks, attributed to PCL and PEG segments in DPEA-PCL-PEG. The corresponding melting and crystallization temperature, and value of crystallinity are much lower than that of their individual homopolymers. The copolymer easily formed the core-shell structural nanoparticles as micelles in water with a lower critical micelle concentration of 5.524 mg l⁻¹.     

铈离子与氨基甲酸酯类化合物引发丙烯酰胺聚合的研究

本文对铈离子与苯基氨基甲酸酯类化合物在H_2O-CH_3CN(3∶1,V/V)及H_2O-HCONH_2(1∶2,V/V)两种介质中引发丙烯酰胺的聚合进行了研究。考察了不同结构的苯基氨基甲酸酯对聚合的影响。苯基氨基甲酸酯类化合物对铈离子引发聚合均有促进作用,其中对-甲苯基氨基甲酸酯的促进作用最为显著。测定了聚合反应表现活化能及聚合动力学方程,并提出了聚合反应机理。     

一些新型呋咱衍生物的合成

以歧化松香为原料, 将其纯化得到脱氢松香酸, 然后经甲酯化、溴代、硝化、成环等步骤, 合成了三个新型脱氢松香酸甲酯呋咱的衍生物12,13-氧化呋咱脱异丙基脱氢松香酸甲酯、12,13-呋咱脱异丙基脱氢松香酸甲酯、12-溴-13,14-氧化呋咱脱异丙基脱氢松香酸甲酯. 产物经红外光谱、核磁共振谱和元素分析方法进行了表征.     

Novel neuronal nitric oxide synthase (nNOS) selective inhibitor, aplysinopsin-type indole alkaloid, from marine sponge Hyrtios erecta

Two novel aplysinopsin-type indole alkaloids, 1 and 2, and three known indole alkaloids were isolated from the marine sponge Hyrtios erecta. These compounds exhibited selective inhibitory activity against the neuronal isozyme of nitric oxide synthase (nNOS). Furthermore, new quinolone 7 was also isolated from the same marine sponge. The chemical structures of these new compounds were elucidated on the basis of spectroscopic analysis.     

Differential pulse voltammetric determination of trace Te(IV) at a poly(3,3′-diaminobenzidine) film modified gold electrode in flow systems

Electropolymerization of 3,3′-diaminobenzidine on a gold surface gave an adherent, stable film of poly(3,3′-diaminobenzidine) (PDAB). This polymer film retained the complexational functionalities of its monomer, demonstrating preconcentration abilities for several ions, including Se(IV) and Te(IV). In particular, in this work, continuous flow and flow injection methods were developed for the sensitive and selective determination of Te(IV). The optimized method for the continuous flow mode had a detection limit of 5.6×10⁻⁹ mol l⁻¹ for 10 min preconcentration. Typical relative standard deviations for six consecutive determinations were 1.82 and 2.56% for Te(IV) concentrations of 1.0×10⁻⁶ and 5.0×10⁻⁸ mol l⁻¹, respectively (10 min preconcentration). The method was applied to the determination of Te(IV) in real samples.     

Aggregation of sodium 1-(n-alkyl)naphthalene-4-sulfonates in aqueous solution: micellization and microenvironment characteristics

In aqueous solution, the micellization and microenvironment characteristics of the micelle assemblies of three anionic surfactants, sodium 1-(n-alkyl)naphthalene-4-sulfonates (SANS), have been investigated by steady-state fluorescence and time-resolved fluorescence decay techniques using pyrene, Ru(bpy)3(2+), and 1,6-diphenyl-1,3,5-hexatriene as fluorescence probes. The critical micelle concentrations (cmc's), effective carbon atom numbers (neff's), hydrophilic-lipophilic balances (HLBs), mean micelle aggregation numbers, micropolarities, and microviscosities of these surfactant micelles have been determined. The logarithmic cmc of the alkylnaphthalene sulfonates decreases linearly with an increase in the neff. The logarithmic aggregation number of the alkylnaphthalene sulfonates increases linearly with an increase in the neff. However, in contrast to the alkylsufonates and the alkylbenzene sulfonates, the aggregation for these alkylnaphthalene sulfonate molecules is less sensitive to the increase in the neff. The micropolarity of these alkylnaphthalene sulfonate micelles is less sensitive to the increase in the alkyl chain length and is lower than that of sodium dodecyl sulfate (SDS). The microviscosity of these alkylnaphthalene sulfonate micelles increases with an increase in the alkyl chain length and is lower than those of nonionic surfactants and zwitterionic surfactants. These results suggest that naphthyl rings have a notable effect on the micellization of SANS.     

Study of temperature transitions in solid poly(oxymethylene) by thermal analysis methods

Poly(oxymethylene)s with different molecular mass and chemical structure were studied using DSC, dynamic mechanical relaxation, thermomechanical analysis, and thermogravimetry.Molecular mobilities of two types were found in the amorphous phase of poly(oxymethylene). Unconstrained chains of poly(oxymethylene) soften at –70°C and then amorphous chains with different restraints from the crystalline phase are successively activated in a wide temperature interval.Dedicated to Professor Bernhard Wunderlich on the occasion of his 65th birthdayThis work has been supported by DuPont Company     

Ultrafine molybdenum carbide nanoparticles supported on nitrogen doped carbon nanosheets for hydrogen evolution reaction

Nitrogen doped carbon nanosheets supported molybdenum carbides nanoparticles (Mo_xC/NCS) have been synthesized by tuning the mass ratio of melamine and ammonia molybdate. The Mo₂C/NCS-10 exhibits superior electrocatalytic performance and stability for HER, which was attributed to N-doped carbon nanosheets, small particle size, mesoporous structure, and large electrochemical active surface area.