Effect of temperature on dynamic rheological behavior of discontinuous cubic liquid crystal

The dynamic rheological properties of discontinuous cubic liquid crystal, formed by nonionic surfactant C(12-14)E(12), were investigated in the discrete and continuous patterns of raising temperature. In the discrete pattern, the discontinuous cubic phase appears in two types of viscoelastic behaviors under the melting points of cubic phase: elastic gel and viscoelastic liquid. When the discontinuous cubic phase begins to melt, it has the weak polymer-like viscoelasticity. Temperature and shear frequency have completely different effects on the ratio of viscous and elastic components of samples in these three states. At low temperature, the samples dominate in elasticity and temperature and shear frequency has hardly any effect on viscoelasticity. At moderate temperature, its ratio of viscous and elastic components increases with increasing temperature and decreasing shear frequency. At the vicinity of the melting point of cubic liquid crystal, the cubic liquid crystal appears to have almost equaled viscous and elastic component; shear has obvious effect on the ratio of viscoelasticity at low frequency. The results from the continuous pattern of raising temperature are consistent with those from the discrete pattern.     

配点型区间有限元法

在分析Taylor展开``点逼近'区间有限元法不足的基础上, 提出了基于Chebyshev第一类正交多项式全局逼近目标函数的配点型区间有限元法. 该方法不需要计算目标函数对不确定性变量的灵敏度, 不要求不确定性变量的变化范围为小区间, 并适合求解目标函数为不确定变量非线性函数的情形. 目标函数正交展开式的系数采用Gauss-Chebyshev求积公式得到,故需要在不确定性变量所在区间内配置高斯积分点. 计算目标函数在高斯点的取值是该方法的主要工作量, 当不确定性变量数为m, 并选用高斯十点法进行积分时, 需要对系统进行12$m$次分析. 算例表明, 在其他区间有限元法失效的情况下, 配点型区间有限元法依然能够得到几乎精确的区间界限.      

多菌灵与Pd（II）体系的共振瑞利散射光谱及分析应用

在pH=10.0的Britton-Robinson（BR）缓冲溶液中,多菌灵与Pd(Ⅱ)反应形成1∶1的六元螯合物,导致共振瑞利散射（RRS）、二级散射（SOS）和倍频散射（FDS）显著增强,并产生新的共振瑞利散射光谱,其最大RRS、SOS和FDS波长分别位于309、606和310 nm。 在一定范围内,3种散射增强（ΔIRRS、ΔISOS和ΔIFDS）均与多菌灵的浓度成正比,反应具有较高的灵敏度,对于多菌灵的检出限分别为7.1×10-9 g/mL（RRS）、7.4×10-9 g/mL（SOS）和10.7×10-9 g/mL（FDS）。 据此提出了测定多菌灵的光散射新方法。 以灵敏度最高的RRS法为例,测定了西芹和市售农药中多菌灵的含量,结果与标准方法一致。 文中还对反应机理和散射增强的原因进行了讨论。     

Fabrication of Superhydrophobic Surface with Different Metal Films on Aluminum Alloy

A simple technique was developed for the fabrication of a superhydrophobic surface on the aluminum alloy sheets. Different hierarchical structures(Ag, Co, Ni and Zn) were formed on the aluminum surface by the galvanic replacement reactions. After the chemical modification of them with fluorination, the wettability of the surfaces was changed from superhydrophilicity to superhydrophobicity. Scanning electron microscopy(SEM), energy dispersive spectrometry(EDS) and water contact angle measurement were performed to characterize the morphological characteristic, chemical composition and superhydrophobicity of the surfaces. The as-prepared superhydrophobic surfaces showed a water contact angle as high as ca.160° and sliding angle as low as ca.3°. We hope the method to produce superhydrophobic surface can be used in many fields.     

基于酶-高分子共聚物的纸芯片用于葡萄糖的快速比色法检测

本文通过聚乙二醇化合成了酶-高分子共聚物纳米颗粒(mPEG-GOx & HRP conjugate nanoparticles,mCNPs),并将其固载在纸芯片上,制备了一种便携式的葡萄糖比色纸芯片.通过扫描电镜(SEM)和能谱分析(EDS)对mCNPs纸芯片的形貌和元素进行了表征和分析.结果 表明,mCNPs已成功负...     

Waveguide modulated non-local optical interaction of semiconductor microdisks

The non-local optical interaction of two semiconductor microdisks with a waveguide bridged at radial direction is proposed and studied by three dimensional finite-difference time-domain （FDTD） electromagnetic simulations. The strong and weak optical interactions between two microdisks are observed and ascribed to the internal coupled modes with different coupling ratios. The vertical radiation losses and the related mode quality factors are modulated by waveguide length and present oscillation characteristics for the resonant modes. In addition, the optical leakage of coupling system is affected by the etching depth of disks due to tile emission of minor components of electric field.     

Mechanics of network materials with responsive crosslinks

The mechanics of responsive fiber-network materials have been explored here by performing coarse-grained molecular dynamics simulations. Theoretical analysis based on a simple viscoelastic model is used to characterize the relationship between their microstructures and overall mechanical behaviors. The dynamic responses in stress and strain induced by externally tuned interfiber crosslinks are discussed. Our results here indicate the possibility of optimizing the dynamic performance of macroscopic network materials by tuning the crosslinks at the molecular level, and lay the groundwork for dynamic material design for structural and mechanical applications.