Trigoxyphins O–T,six new heterodimers from Trigonostemon xyphophylloides

Phytochemical study of the twigs of Trigonostemon xyphophylloides led to the isolation of six new heterodimers, trigoxyphins O (1) and R–T (4–6) comprising of two different degraded diterpenoids, and trigoxyphins P (2) and Q (3) comprising a degraded diterpenoid and a phenylpropanoid, together with a known homodimer, neoboutomannin (7). The structures and relative configurations were elucidated on the basis of extensive spectroscopic analysis, including 1D and 2D NMR experiments. Compounds 1–6 were evaluated for their cytotoxicity against four human tumour cell lines by MTT assay.     

Synthesis of monodisperse oligocarbazoles-functionalized anthracenes with intense blue-emitting

New well-defined monodisperse oligocarbazoles-functionalized anthracenes An-OCZn (n = 1, 2, 3) have been synthesized through Suzuki cross-coupling reaction of the brominated oligocarbazoles and 9,10-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)anthracene. They show good solubility in organic solvents, including dichloromethane, chloroform, toluene, ethyl acetate, and tetrahydrofuran. It should be noted that, in the case of An-OCZn, the formation of the excimer based on anthracene unit is suppressed completely due to the introduction of oligocarbazoles in 9,10-position of anthracene so that an intense blue-emitting has been afforded. In addition, the obtained An-OCZn exhibit good electrochemical and thermal stabilities. Thus, the oligocarbazoles-functionalized anthracenes can be a class of promising candidates for novel blue-emitting materials employed in OLEDs or related devices.     

Adsorption Mechanism of Comb Polymer Dispersants at the Cement/Water Interface

Comb polymers are commonly used as dispersants to stabilize highly concentrated cement suspensions. The effectiveness of such polymeric additives to stabilize these suspensions is determined to a large extent by the amount adsorbed. In this study we investigated the adsorption characteristics of various comb dispersant containing different graft densities on surfaces of cement particle. The effect of inorganic salts on their adsorption was also examined in order to elucidate their adsorption mechanism. The results show that the adsorption of comb polymer dispersants on cement surface conforms approximately to Langmuir's adsorption isotherm and the characteristic plateau A _s and adsorption free energy ΔG_ads are largely dependent on the anionic group content of the comb polymers. The A _s and ΔG_ads increase with increasing anionic group content. This information suggests that the adsorption of comb polymers on cement surfaces is dominated by electrostatic interaction between COO-groups on the comb polymers and the positive surface of the cement. This conclusion is supported by effects of inorganics such as calcium and sulfate ions, and diffuse reflectance FTIR spectroscopy. The implication of results for tuning polymers for the required performance in cement manufacture should be noted.     

Rational Design of an “OFF–ON” Phosphorescent Chemodosimeter Based on an Iridium(III) Complex and Its Application for Time‐Resolved Luminescent Detection and Bioimaging of Cysteine and Homocysteine

Biothiols, such as cysteine (Cys) and homocysteine (Hcy), play very crucial roles in biological systems. Abnormal levels of these biothiols are often associated with many types of diseases. Therefore, the detection of Cys (or Hcy) is of great importance. In this work, we have synthesized an excellent “OFF‐ON” phosphorescent chemodosimeter 1 for sensing Cys and Hcy with high selectivity and naked‐eye detection based on an Ir^III complex containing a 2,4‐dinitrobenzenesulfonyl (DNBS) group within its ligand. The “OFF‐ON” phosphorescent response can be assigned to the electron‐transfer process from Ir^III center and C^N ligands to the DNBS group as the strong electron‐acceptor, which can quench the phosphorescence of probe 1 completely. The DNBS group can be cleaved by thiols of Cys or Hcy, and both the ³M LCT and ³LC states are responsible for the excited‐state properties of the reaction product of probe 1 and Cys (or Hcy). Thus, the phosphorescence is switched on. Based on these results, a general principle for designing “OFF‐ON” phosphorescent chemodosimeters based on heavy‐metal complexes has been provided. Importantly, utilizing the long emission‐lifetime of phosphorescence signal, the time‐resolved luminescent assay of 1 in sensing Cys was realized successfully, which can eliminate the interference from the short‐lived background fluorescence and improve the signal‐to‐noise ratio. As far as we know, this is the first report about the time‐resolved luminescent detection of biothiols. Finally, probe 1 has been used successfully for bioimaging the changes of Cys/Hcy concentration in living cells.     

Designed Synthesis of Well‐Defined Pd@Pt Core–Shell Nanoparticles with Controlled Shell Thickness as Efficient Oxygen Reduction Electrocatalysts

Improving the electrocatalytic activity and durability of Pt‐based catalysts with low Pt content toward the oxygen reduction reaction (ORR) is one of the main challenges in advancing the performance of polymer electrolyte membrane fuel cells (PEMFCs). Herein, a designed synthesis of well‐defined Pd@Pt core–shell nanoparticles (NPs) with a controlled Pt shell thickness of 0.4–1.2 nm by a facile wet chemical method and their electrocatalytic performances for ORR as a function of shell thickness are reported. Pd@Pt NPs with predetermined structural parameters were prepared by in situ heteroepitaxial growth of Pt on as‐synthesized 6 nm Pd NPs without any sacrificial layers and intermediate workup processes, and thus the synthetic procedure for the production of Pd@Pt NPs with well‐defined sizes and shell thicknesses is greatly simplified. The Pt shell thickness could be precisely controlled by adjusting the molar ratio of Pt to Pd. The ORR performance of the Pd@Pt NPs strongly depended on the thickness of their Pt shells. The Pd@Pt NPs with 0.94 nm Pt shells exhibited enhanced specific activity and higher durability compared to other Pd@Pt NPs and commercial Pt/C catalysts. Testing Pd@Pt NPs with 0.94 nm Pt shells in a membrane electrode assembly revealed a single‐cell performance comparable with that of the Pt/C catalyst despite their lower Pt content, that is the present NP catalysts can facilitate low‐cost and high‐efficient applications of PEMFCs.     

阳离子聚丙烯酰胺水分散液的制备及表征

通过丙烯酰胺(AM)与甲基丙烯酰氧乙基三甲基氯化铵(DMC)的水相分散共聚合制得阳离子聚丙烯酰胺(CPAM)水分散液.以红外光谱(FTIR),核磁共振(1H-NMR),光学显微照片(OP)证实了产物结构与形成机理;研究了引发剂类型及用量,无机盐选择及用量,分散剂用量及单体配比对CPAM转化率、分子量及分散液黏度的影响.结果表明,采用2,2’-偶氮二[2-(2-咪唑啉-2-代)丙烷]二氢氯化物(VA-044)和过硫酸钾(KPS)/甲醛次硫酸氢钠(SFS)复合引发剂,在硫酸铵浓度28%～32%,同时添加少量硫酸锂或氯化钠,分散剂0.5%～1.5%(所有物质用量皆对总反应体系而言)条件下,可在高转化率同时得到分子量较高、流动性良好的CPAM水分散液.     

La3+,Ce4+对制备堇青石材料晶相转变及烧结性能的影响

以菱镁矿风化石、工业氧化铝和二氧化硅微粉为原料,加入不同含量氧化镧、氧化铈添加剂,通过固相反应合成制备堇青石材料。用XRD法和SEM法表征试样中的晶相组成和显微结构,用X’Pert Plus软件计算主晶相的晶格常数、晶胞体积和试样的相对结晶度,用半定量法计算试样中各晶相含量,用Scherrer公式计算主晶相的粒径大小。研究分析了La3+,Ce4+对制备堇青石材料晶相组成、主晶相粒径大小、晶胞常数、试样相对结晶度、显微结构及烧结性能的影响。结果表明:氧化镧比氧化铈具有更好的助堇青石烧结性,加入氧化镧的堇青石试样具有更好的致密性;随着氧化镧、氧化铈加入量的增加,堇青石晶胞常数和晶胞体积呈现先增大后减小趋势;Ce4+更高的电场强度促进了堇青石材料更容易发生晶相转变形成莫来石。     

Fluorescent sensor based on dimesitylborylthiophene derivative for probing fluoride and cyanide

A new D-π-A dimesitylboron derivative with terminal phenothiazine bridged by fluorenevinyl (PFTB) has been synthesized. It was found that PFTB could selectively recognize fluoride and cyanide anions by naked eyes. Upon addition of F⁻ and CN⁻, the color of the solution of PFTB in DCM turned to yellowish-green from yellow and strong green emitting was observed under UV light, while the emission of PFTB in DCM was weak. Moreover, the presence of 10 equiv of tetrabutylammonium salts of other anions, such as Cl⁻, Br⁻, I⁻, AcO⁻, HSO₄⁻, H₂PO₄⁻, could not lead to obvious changes of the UV–vis absorption and the fluorescent emission spectra of PFTB. The detection limits of PFTB towards F⁻ and CN⁻ were 7.52×10⁻⁸ mol/L and 6.12×10⁻⁸ mol/L in DCM, respectively. Therefore, the D-π-A type triarylborane derivatives can be used as ‘turn on’ fluorescent sensors for detecting F⁻ and CN⁻.     

Transformations of iodine species inside elliptical channels of AlPO4‐11 crystals at low temperature: a Raman study

Raman spectra of iodine species confined in one‐dimensional elliptical channels of AlPO₄‐11 (AEL) crystals have been studied from room temperature down to −196 °C. As temperature decreases, thermal fluctuations of individual iodine molecules confined in AEL channels are slowed down and they prefer to rotate to channel axis direction, which increases the population of iodine molecules along channel axis (i.e., lying molecules and chains). Such temperature‐driven orientation transformation of iodine molecules is found to be reversible upon heating up to room temperature. The experimental observations are in good agreement with our theoretical simulations by molecular dynamics on low density iodine‐filled AEL crystals. We thus provide a new way to modulate the orientation of iodine molecules in nanochannels, which may have implications in low‐temperature‐sensitive nanoscale devices. Copyright © 2015 John Wiley & Sons, Ltd.     

A Ti3C2TX/Pt–Pd based amperometric biosensor for sensitive cancer biomarker detection

The detection of cancer biomarkers is of great significance for the early screening of cancer. Detecting the content of sarcosine in blood or urine has been considered to provide a basis for the diagnosis of prostate cancer. However, it still lacks simple, high-precision and wide-ranging sarcosine detection methods. In this work, a Ti₃C₂T_X/Pt–Pd nanocomposite with high stability and excellent electrochemical performance has been synthesized by a facile one-step alcohol reduction and then used on a glassy carbon electrode (GCE) with sarcosine oxidase (SO_x) to form a sarcosine biosensor (GCE/Ti₃C₂T_X/Pt–Pd/SO_x). The prominent electrocatalytic activity and biocompatibility of Ti₃C₂T_X/Pt–Pd enable the SO_x to be highly active and sensitive to sarcosine. Under the optimized conditions, the prepared biosensor has a wide linear detection range to sarcosine from 1 to 1000 µM with a low limit of detection of 0.16 µM (S/N = 3) and a sensitivity of 84.1 µA/mM cm². Besides, the reliable response in serum samples shows its potential in the early diagnosis of prostate cancer. More importantly, the successful construction and application of the amperometric biosensor based on Ti₃C₂T_X/Pt–Pd will provide a meaningful reference for detecting other cancer biomarkers.