Effects of Nb substitution for Zr on the phases,microstructure and magnetic properties of Co80Zr18−xNbxB2 melt-spun ribbons

The phases, microstructure, and magnetic properties of Co₈₀Zr_18−xNb_xB₂ (x=1, 2, 3, and 4) melt-spun ribbons were investigated. The small substitution of Nb for Zr in the Co–Zr–B melt-spun ribbons resulted in the improvement of magnetic properties, especially the coercivity. The main effect of added Nb on the coercovity of Co–Zr–Nb–B melt-spun ribbons, originated from modification of the grain size of Co₁₁Zr₂ phase. The coercivity of the Co–Zr–Nb–B melt-spun ribbons depends on the annealing temperature. The optimal magnetic properties of H_c=5.1 kOe, and (BH)_max=3.4 MGOe were obtained in the Co₈₀Zr₁₅Nb₃B₂ melt-spun ribbons annealed at 600 °C for 3 min.     

谐振势阱中的布朗运动——磁镊实验与模拟

从磁镊实验和模拟角度研究了处于谐振势阱中的布朗运动. 利用实验和模拟的结果验证了理论.然后通过理论与实验的对照, 对磁镊实验中DNA分子的持久长度大小对小球位移分布的影响, 以及磁镊实验中的测力误差作了相关分析.分析指出:持久长度的变化对沿 DNA链方向上的布朗运动影响更大;小的外力作用下力的测量会出现较大误差.     

遗传算法结合正则化方法反演海洋大气波导

针对正则化方法在解决实际反演问题时既能克服问题的不适定性又可以很大程度上抑制噪声和误差的传播, 本文提出了利用遗传算法结合正则化方法的新算法, 在遗传算法适应度函数中引入正则化项来反演波导参数; 然后对算法进行仿真试验, 结果表明新算法与传统遗传算法相比具有较高的反演精度, 并指出当噪声误差小于10%时, 算法具有较强的“去噪”性能; 最后利用机载雷达在Wallops岛探测的海表面处局部回波资料进行反演试验, 将反演结果与实测大气折射率廓线进行比较, 说明该算法的有效性. 新方法为海洋大气波导反演研究提供了一种新思路.     

Sampling of fractional bandlimited signals associated with fractional Fourier transform

Fractional Fourier transform (FRFT) plays an important role in many fields of optics and signal processing. This paper considers the problem of reconstructing a fractional bandlimited signal with FRFT. We propose a novel reconstruction method for fractional bandlimited signals using the fractional Fourier series (FRFS). The advantage is that the sampling expansion can be deduced directly not based on the Shannon theorem. By utilizing the generalized form of Parseval’s relation for complex FRFS, we obtain the sampling expansion for fractional bandlimited signals with FRFT. We show that the sampling expansion for fractional bandlimited signals with FRFT is a special case of Parseval’s relation for complex FRFS.     

基于非色散紫外算法的一氧化氮气体检测与分析

提出了一种基于非色散紫外(NDUV)算法,利用光电二极管阵列(PDA)探测器和光谱仪检测一氧化氮气体的分析方法。通过对比分析不同积分次数下一氧化氮吸收谱和无吸收谱内不同波长宽度的总光强,引入光源影响因子F和吸收谱因子B,得到吸光度与浓度的拟合方程及相关系数。结果表明,采用合适的拟合阶数、拟合波长宽度和分析方法,吸光度与浓度的二阶拟合相关系数可达0.999 9以上, 通过拟合方程所获得的待测气体浓度与标准值浓度的误差在3%以内。     

Li and K NMR relaxation study of a LiKSO4 single crystal

The ⁷Li and ³⁹K NMR relaxations in a LiKSO₄ single crystal grown by the slow evaporation method were investigated by employing a pulse NMR spectrometer. From the experimental data, the quadrupole coupling constant and asymmetry parameter were determined at the temperatures of 180 and 300 K. The relaxation processes of ⁷Li and ³⁹K were studied for the LiKSO₄ crystal, and the relaxation times for the ⁷Li and ³⁹K nuclei exhibit remarkable changes near T_c2 (=190 K). The activation energies for ⁷Li and ³⁹K were determined in phases I and III. The large change in the activation energy at 190 K indicates that the Li and K ions are significantly affected during this transition. The correlation time of the ⁷Li calculated from the spin-lattice relaxation time and quadrupole parameters was larger than that of the ³⁹K calculated using the same method. The reason for this is that the Li ion undergoes molecular motion as in the LiO₄ groups.     

双脉冲高功率脉冲调制器的设计

采用螺旋线和折叠线技术相结合的方法,设计了一种基于水介质高功率脉冲调制器。该调制器采用了两个开关,通过控制两个开关的导通时刻,可以在两个负载上得到脉冲长度相等的两个脉冲。对该种折叠型传输线的波过程进行了详细分析,给出了过渡段部分阻抗等参数对负载电压的影响;用Pspice电路软件对脉冲形成线的充电电压和二极管电压、电流进行了模拟;最后利用高压同轴电缆,对该种类型调制器进行了低压情况下的验证实验,实验结果与理论分析、模拟研究一致。此种类型的调制器具有结构紧凑、可同时输出两个脉冲的优点。     

A novel evacuation passageway formed by a breathing air supply zone combined with upward ventilation

With the development of transportation, the tunnel has become one of the important facilities of railway, highway and subway transportation. However, fire hazards occurring inside the tunnel may incur huge numbers of casualties and property losses. In this paper, a breathing air supply zone combined with an upward ventilation assisted tunnel evacuation system (BTES) is introduced. It can be used to create a safe, smoke-free evacuation passageway out of the tunnel. The BTES is optimized to achieve high-performance. The impacts of heat release rates, fire source locations and fire detection times are also discussed.     

Combined prostate diffusion tensor imaging and dynamic contrast enhanced MRI at 3T — quantitative correlation with biopsy

The purpose of this work was to compare diagnostic accuracy of Diffusion Tensor Imaging (DTI), dynamic contrast-enhanced magnetic resonance imaging (DCE MRI) and their combination in diagnosing prostate cancer. Twenty-five patients with clinical suspicion of prostate cancer underwent MRI, prior to transrectal ultrasound-guided biopsies. MRI data were correlated to biopsy results. Logistic regression models were constructed for the DTI parameters, DCE MRI parameters, and their combination. The areas under the receiver operator characteristic curves (AUC) were compared between the models. The nonparametric Wilcoxon signed rank test was used for statistical analysis. The sensitivity and specificity values were respectively 81% (74–87%) and 85% (79–90%) for DTI and 63% (55–70%) and 90% (85–94%) for DCE. The combination “DTI or DCE MRI” had 100% (97–100%) sensitivity and 77% (69–83%) specificity, while “DTI and DCE MRI” had 44% (37–52%) sensitivity and 98% (94–100%) specificity. The AUC for DTI+DCE parameters was significantly higher than that for either DTI (0.96 vs. 0.92, P=.0143) or DCE MRI parameters (0.96 vs. 0.87, P=.00187) alone. In conclusion, the combination of DTI and DCE MRI has significantly better accuracy in prostate cancer diagnosis than either technique alone.     

New red Y0.85Bi0.1Eu0.05V1−yMyO4 (M=Nb, P) phosphors for light-emitting diodes

The Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) as new near-ultraviolet excited phosphors were synthesized and their luminescence properties under 365 nm excitation were investigated in detail. It indicated that by doping small amount of P⁵⁺ into V⁵⁺ sites, the excitation intensity of charge transfer (CT) band of Bi–O (330–400 nm) was greatly improved. By substituting Nb⁵⁺ for V⁵⁺, both the CT bands of Bi–O and Eu–O (240–320 nm) were significantly enhanced. As a result, the emission intensity of Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) could be improved about 90% by doping 5 mol% P⁵⁺ and 110% by doping 5 mol% Nb⁵⁺. Comparing with the commercial Y₂O₂S:Eu³⁺ phosphors, the Y_0.85Bi_0.1Eu_0.05V_0.95M_0.05O₄ (M=Nb, P) phosphors exhibited excellent color purity and much higher brightness. The results showed that these Y_0.85Bi_0.1Eu_0.05V_1−yM_yO₄ (M=Nb, P) phosphors could be considered as promising red phosphors for application in LED.