硼玻璃中Sm3+离子的衰减及交叉弛豫

本文从Sm3+的衰减特性及能级跃迁性质两个方面研究Sm3+离子间的相互作用.一方面研究不同浓度Sm3+的衰减性质,利用Hirayama的理论确立相互作用的性质,另一方面研究相关能级的跃迁性质,从而证实由衰减所得结论的合理性.     

一种测量物质折射率的新方法—Eu3+离子发射光谱法

本文提出一种利用Eu3+离子发射光谱来测定物质析射率的方法,使可测对象不仅限于晶体和玻璃,而且扩展到粉末样品.用此方法检验几种已知析射率的材料,都得到较好的符合.     

Practical and Highly Selective C?H Functionalization of Structurally Diverse Ethers

A trityl ion mediated C H functionalization of ethers with a wide range of nucleophiles at ambient temperature has been developed. The reaction displays high chemoselectivity and good functional group tolerance. The protocol also exhibits excellent regio‐ and diastereoselectivities for the unsymmetric ethers, thus stereoselectively generating highly functionalized disubstituted 2,5‐trans tetrahydrofurans (THF), 2,6‐trans tetrahydropyrans (THP), 2,6‐trans dihydropyrans (DHP), and 1,3‐trans isochromans, and highlighting the capacity of the protocol in complex molecule synthesis.     

Urea‐Based Porous Organic Frameworks: Effective Supports for Catalysis in Neat Water

Two urea‐based porous organic frameworks, UOF‐1 and UOF‐2, were synthesized through a urea‐forming condensation of 1,3,5‐benzenetriisocyanate with 1,4‐diaminobenzene and benzidine, respectively. UOF‐1 and UOF‐2 possess good hydrophilic properties and high scavenging ability for palladium. Their palladium polymers, Pd^II/UOF‐1 and Pd^II/UOF‐2, exhibit high catalytic activity and selectivity for Suzuki–Miyaura cross‐coupling reactions and selective reduction of nitroarenes in water. The catalytic reactions can be efficiently performed at room temperature. Palladium nanoparticles with narrow size distribution were formed after the catalytic reaction and were well dispersed in UOF‐1 and UOF‐2. XPS analysis confirmed the coordination of the urea oxygen atom with palladium. SEM and TEM images showed that the original network morphology of UOF‐1 and UOF‐2 was maintained after palladium loading and catalytic reactions.     

新型高色纯度弱电流猝灭性蓝色有机发光器件

以ADN为基质,分别以不同掺杂剂制备了四种蓝色有机发光器件,器件结构为:CuPc(12 nm)/NPB(40 nm)/AND∶Dopant(50 nm)/Alq(12 nm)/LiF(4 nm)/Al。掺杂剂有:BCzVB(amino-substituted distyrylarylenederivatives)、TBPe、BCzVBi和DSA-ph四种。研究了最佳掺杂浓度以及器件的亮度、电流密度、效率和色坐标等电学特性和光学特性。其中掺杂BCzVB制备了色纯度高、低电流猝灭性的蓝色有机发光器件,色坐标达到x=0.146,y=0.162,最大亮度为11600 cd/m2(15 V),电流效率为2.8 cd/A,流明效率为1.79 lm/W;以ADN为基质,分别以TBPe、BCzVBi和DSA-ph为掺杂剂,制备了另外三种对比器件。器件ADN∶TBPe色坐标为x=0.162,y=0.222(蓝绿光),效率随电流的增加而降低很快;器件ADN∶BczVBi有较好的色纯度(色坐标:x=0.164,y=0.146),但电流效率较低:2.03 cd/A,效率随电流的增加降低幅度也较快。器件ADN∶DSA-ph效率较高为8 cd/A,效率随电流增加变化幅度不大,但色纯度比较差(x=0.153,y=0.306),适合于做白色有机发光器件。     

Deep ultraviolet tip-enhanced Raman scattering

Electromagnetic mechanism of deep ultraviolet tip-enhanced Raman scattering (DUV-TERS) is investigated theoretically with the finite-difference time-domain (FDTD) method, stimulated by recent DUV-TERS experimental reports. FDTD results reveal that the strongest electromagnetic enhancement factor for DUV-TERS is as high as 7 orders in the optimal geometry.     

Z箍缩驱动聚变-裂变混合堆氚燃料循环系统氚盘存量与氚自持初步分析

为研究氚自持条件,建立了Z-FFR氚分析模型,基于理论方程和氚平均滞留时间方法进行计算,得到稳态运行时排灰气处理系统、氚增殖提取系统、同位素分离系统、水去氚化系统的氚质量流分别为52.30,25.40,81.30,3.60 g/day,对应的氚盘存量为52.30,25.40,8.13,1.80 g。同时以氚质量流推导出氚自持判断条件,分析了设计参数能够满足氚自持要求,同时获得了燃烧效率、氚增殖率、提取效率与氚自持的互补关系,三者作为关键参数相互依存,于临界值、设计值、理想值之间分析了氚的自持情况。     

An Acceleration Technique for the Augmented IIM for 3D Elliptic Interface Problems

A new fast algorithm based on the augmented immersed interface method and a fast Poisson solver is proposed to solve three dimensional elliptic interface problems with a piecewise constant but discontinuous coefficient. In the new approach, an augmented variable along the interface, often the jump in the normal derivative along the interface is introduced so that a fast Poisson solver can be utilized. Thus, the solution of the Poisson equation depends on the augmented variable which should be chosen such that the original flux jump condition is satisfied. The discretization of the flux jump condition is done by a weighted least squares interpolation using the solution at the grid points, the jump conditions, and the governing PDEs in a neighborhood of control points on the interface. The interpolation scheme is the key to the success of the augmented IIM particularly. In this paper, the key new idea is to select interpolation points along the normal direction in line with the flux jump condition. Numerical experiments show that the method maintains second order accuracy of the solution and can reduce the CPU time by 20-50%. The number of the GMRES iterations is independent of the mesh size.     

高亮度高效率蓝色聚合物发光二极管

蓝色聚合物发光二极管是人们关注的课题,前不久,我们报道[1]了利用ITO/PVCz/BBOT/Mg·Ag结构达到亮度1700cd/m2,量子效率0.2%的蓝色器件.在本文中我们报道以掺杂perylene(PRL)和triphenylamine(TPA)的poly(N-vinylcar-bazole)(PVCz)为空穴传输层,以PBD为空穴锁住层,Alq为电子注入层的器件,其亮度达6100cd/m2,量子效率达0.7500,流明效率0.451m/W的蓝色发光器件.就我们所知,这个亮度是蓝光中最高的亮度.     

SiO2气凝胶中ZnS∶Mn纳米微晶的发光性质

利用溶胶 凝胶法在SiO2 气凝胶中制得了ZnS∶Mn纳米微晶 ,并对微晶的X射线衍射谱、激发 发射光谱、发光效率、时间分辨光谱进行了研究 ,讨论了发光性质变化的原因。实验表明 ,Mn2 + 在纳米微晶中的发光效率相对于体材料有明显的提高 ,弛豫时间也比在体材料中缩短了约一个数量级