三类构型激光脉冲压缩器光栅拼接误差容限比较

建立了包含拼接光栅的三类典型构型(双程Z型、X型及菱型)激光脉冲压缩器的理论模型. 利用光线追迹法计算压缩器引入的相位变化,结合傅里叶变换的方法仿真分析并比较了各压缩器相应的光栅拼接误差容限. 以远场焦斑峰值能量下降到理想值的0.9倍为限确定了三类压缩器光栅拼接误差容限,明确了不同构型激光脉冲压缩器对拼接误差的敏感程度. 这对脉冲压缩器的选型和设计具有指导意义. 关键词： 光栅拼接 脉冲压缩 误差容限 光线追迹     

无序双层六角氮化硼量子薄膜的电子性质

基于安德森紧束缚模型,本文研究了无序双层六角氮化硼量子薄膜的电子性质. 数值计算结果表明在双层都无序掺杂的情况下,六角氮化硼量子薄膜的电子是局域的, 其表现为绝缘体性质;而对于单层掺杂(无论是氮原子还是硼原子)的双层六角氮化硼量子薄膜, 在能谱的带尾出现了持续的迁移率边.这就说明在单层掺杂的双层六角氮化硼量子薄膜中产生了 金属绝缘体转变.这一结果证实了有序-无序分区掺杂的理论模型,为理解及调控双层六角氮化硼量子薄膜 的电子性质提供了有益的理论指导.     

Z箍缩丝阵负载区域的似稳态磁场分布

 将负载区域的电流（丝阵电流、阴极板电流、阳极板电流和回流柱电流）离散成电流线或电流面等电流微元,根据毕奥-萨伐尔定律,计算所有电流微元在指定场点的磁场,再通过叠加给出该点的总磁场。研究结果发现:在丝阵外围区域,仅由丝阵电流所产生的磁场偏离无限长直导线磁场公式的值,但全部电流所产生的总磁场与公式给出的值很接近。同时,研究了不同负载结构参数下的磁场分布,结果表明：增加丝根数有助于减小单根丝表面的局部磁场,改善丝阵外围磁场分布的均匀性。     

薄膜介质层绕式Blumlein线理论与实验研究

对薄膜介质层绕式Blumlein线的特性参数进行了理论分析。采用Pspice软件对电路模型进行了计算,分析了开关电感、寄生电阻对负载输出波形的影响。结果表明:开关电感的存在使得负载波形前沿变缓,后延波形扭曲变差,寄生电阻会影响负载的电压输出效率。采用模拟软件对传输线中的电磁场分布进行了计算,结果表明薄电极边缘场畸变以及折叠弯曲部分的场变化是绝缘介质耐压必须考虑的因素。基于此理论分析,设计制作了一种新型薄膜介质Blumlein线,绝缘材料为聚酯薄膜,单层薄膜厚100μm,电极为厚50μm的铜皮,单元模块设计耐压50 kV。进行了三级模块串联叠加实验,充电25 kV,匹配负载输出60 kV,脉冲上升沿80 ns,脉冲宽度200 ns。     

Vertically Grown Few-Layer MoS2 Nanosheets on Hierarchical Carbon Nanocages for Pseudocapacitive Lithium Storage with Ultrahigh-Rate Capability and Long-Term Recyclability

Molybdenum disulfide (MoS₂) is an intensively studied anode material for lithium-ion batteries (LIBs) owing to its high theoretical capacity, but it is still confronted by severe challenges of unsatisfactory rate capability and cycle life. Herein, few-layer MoS₂ nanosheets, vertically grown on hierarchical carbon nanocages (hCNC) by a facile hydrothermal method, introduce pseudocapacitive lithium storage owing to the highly exposed MoS₂ basal planes, enhanced conductivity, and facilitated electrolyte access arising from good hybridization with hCNC. Thus, the optimized MoS₂/hCNC exhibits reversible capacities of 1670 mAh g⁻¹ at 0.1 A g⁻¹ after 50 cycles, 621 mAh g⁻¹ at 5.0 A g⁻¹ after 500 cycles, and 196 mAh g⁻¹ at 50 A g⁻¹ after 2500 cycles, which are among the best for MoS₂-based anode materials. The specific power and specific energy, which can reach 16.1 kW and 252.8 Wh after 3000 cycles, respectively, indicate great potential in high-power and long-life LIBs. These findings suggest a promising strategy for exploring advanced anode materials with high reversible capacity, high-rate capability, and long-term recyclability.