Hyperchaos generated from the Lorenz chaotic system and its control

In this Letter, a hyperchaotic Lorenz system is constructed via state feedback control. Abundant dynamics of the hyperchaotic system is studied using the Lyapunov exponents, Poincaré section and bifurcation diagram. Furthermore, effective linear feedback controllers are designed for stabilizing hyperchaos to unstable equilibrium, periodic orbits and quasi-periodic orbit. Numerical simulations are given to illustrate and verify the results.     

北京同步辐射装置3W1B软X射线光束线偏振特性测量

应用自行研制的Mo/Si周期多层膜作为起偏器和检偏器的光学元件, 测量了北京同步辐射装置3W1B束线的偏振状态. 通过数据分析, 得到了3W1B软X射线的有关偏振参数, 在86—89eV能区经过起偏器后的偏振度超过98%, 圆偏振分量介于1%—3%之间.     

Tuning the wettability of calcite cubes by varying the sizes of the polystyrene nanoparticles attached to their surfaces

The wettability of calcite cubes was tuned by varying the sizes of the polystyrene nanoparticles attached to their surfaces via a dispersion polymerization. The products were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), energy dispersion spectrum (EDS) and Fourier transformation infrared spectrum (FTIR). The results showed that the hydrophobicity of the calcite cubes was enhanced with the increase of the size of the polystyrene nanoparticles attached. Using polystyrene nanoparticle-attached calcite cubes (PNACC) as emulsifiers, stable water-in-tricaprylin Pickering emulsions were produced. By gelling the water droplets of the Pickering emulsions, the hierarchical structures of polystyrene nanoparticle-attached calcite cube-armored microspheres were obtained. The polystyrene nanoparticle-attached calcite cubes were expected to have novel surface properties similar neither to traditional Pickering particles, nor to macroscopically asymmetrical Janus particles.     

The influence of fiber dispersion on the code form of the optical mm-wave signal generated by single sideband intensity-modulation

We have theoretically investigated the transmission performance of the optical mm-wave generation by using an external modulator based on single sideband (SSB) intensity modulation. Though the SSB millimeter (mm)-wave can immune the fading effect, the baseband signals with a high bit rate are degraded greatly after transmission along fiber. The main reason is that the fiber dispersion causes the time shift of the code edges; therefore the maximum transmission distance of the baseband signals is limited. The experimental and simulation results agree well with our theoretical analysis. We also propose a novel scheme to extend the transmission distance. In this novel scheme, the data signals are modulated only onto one of the two optical carriers; hence the shift of the code edges in the down-converted signals after transmission is eliminated.     

Exact chirped gray soliton solutions of the nonlinear Schrödinger equation with variable coefficients

In this paper, we consider the nonlinear Schrödinger equation with variable coefficients, and by using direct transformation of variables and functions, the explicit chirped gray one- and two-soliton solutions are presented. Based on the exact solutions, we in detail analyze the propagation characteristics of the chirped gray soliton, including the stability against either the deviation from integrable condition or the initial perturbation, and interaction between the chirped gray solitons. The results show that the gray soliton can be compressed by choosing the appropriate initial chirp, and the chirped gray pulses can stably propagate along optical fibers remaining the character of solitons.     

Ab initio investigation of hydrogenation of (BN)12

Ab initio molecular orbital theory was used to examine the hydrogenation of a B₁₂N₁₂ molecule. The 1,2 addition of the 4,6 bond is an energetically favorable adsorption site in one-hydrogen-molecule adsorption. We found that the averaged bind energy of hydrogen molecule is maximized in B₁₂N₁₂H₁₂. The largest energy gaps of B₁₂N₁₂H₁₂ and B₁₂N₁₂H₂₄ suggest they have special stability. Moreover, calculation of the Gibbs free energy of the B₁₂N₁₂ + 12H₂ → B₁₂N₁₂H₂₄ reaction showed that this reaction becomes endothermic above 320 K.     

Dynamic single-mode and modulation characteristics analyses for λ/4 phase-shifted distributed feedback lasers with chirped grating

The dynamic single-mode and modulation performance of λ/4 phase-shifted distributed feedback laser diode with chirped grating (QWS-CG-DFB) are analyzed theoretically. The numerical simulation shows that, in contrast to purely QWS-DFB laser, the enhanced dynamic single-mode suppression ratio (SMSR) can be reached by QWS-CG-DFB laser. Under the smaller biasing current, the modulation band-width in presence of chirped grating is narrower, this difference shrinks for larger biasing current. For large signal modulation, the chirped grating is helpful to increase the output extinction ratio, but worsens the frequency chirping. The good dynamic characteristic can be obtained by selecting system parameters reasonably.     

Femtosecond laser-induced ZnSe nanowires on the surface of a ZnSe wafer in water

We present a simple route for ZnSe nanowire growth in the ablation crater on a ZnSe crystal surface. The crystal wafer, which was horizontally dipped in pure water, was irradiated by femtosecond laser pulses. No furnace, vacuum chamber or any metal catalyst were used in this experiment. The size of the nanowires is about 1-3 μm long and 50-150 nm in diameter. The growth rate is 1-3 μm/s, which is much higher than that achieved with molecular-beam epitaxy and chemical vapor deposition methods. Our discovery reveals a rapid and simple way to grow nanowires on designed micro-patterns, which may have potential applications in microscopic optoelectronics.     

Fabrication and properties of PLT/PLZT/PLT structures obtained by RF magnetron sputtering

Ferroelectric Pb_0.84La_0.16Ti_0.96O₃/Pb_0.96La_0.04(Zr_0.52Ti_0.48)_0.99O₃/Pb_0.84La_0.16Ti_0.96O₃ (PLT/PLZT/PLT) structures were fabricated on platinum-coated silicon wafers by RF magnetron sputtering. A Pb_0.84La_0.16Ti_0.96O₃ layer was used as a seed layer to improve the crystallization and enhance the ferroelectric properties of the PLZT film. With the PLT seed layers, the films showed excellent ferroelectric properties in terms of large remnant polarization (2P_r) of 52.7 μC/cm², lower coercive field (2E_c) of 130 kV/cm for an applied field of 500 kV/cm. Moreover, the PLT/PLZT/PLT structures exhibited good fatigue endurance after 10¹⁰ switching cycles, which was attributed to the double-sided PLT layers. They improved the electrical fatigue by eliminating the pyrochlore phase, reduced the strong (111) orientation, and assimilated the oxygen vacancies from the PLZT layer.     

Near-Field Fluorescence and Topography Characterization of a Single Nanometre Fluorophore by Apertureless Tip-Enhanced Scanning Near-Field Microscopy

Tip-enhanced near-field fluorescence and topography characterization of a single nanometre fluorophore is conducted by using an apertureless scanning near-field microscopy system. A fluorophore with size 80hm is mapped with a spatial resolution of 10hm. The corresponding near-field fluorescence data shows significant signal enhancement due to the apertureless tip-enhanced effect. With the nanometre spatial resolution capability and nanometre local tip-enhanced effect, the apertureless tip-enhanced scanning near-field microscopy may be further used to characterize a single molecule by realizing the local near-field spectrum assignment corresponding to topography at nanometre scale.