A vanadium(IV) phosphite with a pillared layered structure: hydrothermal synthesis and characterization of (VO)4(4,4'-bpy)2(HPO3)4

A novel vanadium(IV) phosphite, (VO)(4)(4,4'-bpy)(2)(HPO(3))(4), was hydrothermally synthesized and characterized by single-crystal X-ray diffraction. This compound crystallizes in the monoclinic system with the space group C2/c and cell parameters a = 35.970(3) A, b = 15.9400(13) A, c = 10.7681(7) A, beta = 101.073(4) degrees, and Z = 8 with R(1) = 0.0482. The structure of the compound consists of trigonal bipyramidal [VO(4)N] and pseudopyramidal [HPO(3)] blocks, which are connected by corner-sharing, to form vanadium phosphite layers in the bc plane. These layers are further linked through 4,4'-bpy pillars, generating a 3D framework. Thermogravimetric analysis and magnetic susceptibility data for this compound are given.     

Adsorption of NH3 onto activated carbon prepared from palm shells impregnated with H2SO4

Adsorption of ammonia (NH3) onto activated carbons prepared from palm shells impregnated with sulfuric acid (H2SO4) was investigated. The effects of activation temperature and acid concentration on pore surface area development were studied. The relatively large micropore surface areas of the palm-shell activated carbons prepared by H2SO4 activation suggest their potential applications in gas adsorption. Adsorption experiments at a fixed temperature showed that the amounts of NH3 adsorbed onto the chemically activated carbons, unlike those prepared by CO2 thermal activation, were not solely dependent on the specific pore surface areas of the adsorbents. Further adsorption tests for a wide range of temperatures suggested combined physisorption and chemisorption of NH3. Desorption tests at the same temperature as adsorption and at an elevated temperature were carried out to confirm the occurrence of chemisorption due to the interaction between NH3 and some oxygen functional groups via hydrogen bonding. The surface functional groups on the adsorbent surface were detected by Fourier transform infrared spectroscopy. The amounts of NH3 adsorbed by chemisorption were correlated with the contents of elemental oxygen present in the adsorbents. Mechanisms for chemical activation and adsorption processes are proposed based on the observed phenomena.     

Ultraviolet photochemistry of ethane: implications for the atmospheric chemistry of the gas giants

Chemical processing in the stratospheres of the gas giants is driven by incident vacuum ultraviolet (VUV) light. Ethane is an important constituent in the atmospheres of the gas giants in our solar system. The present work describes translational spectroscopy studies of the VUV photochemistry of ethane using tuneable radiation in the wavelength range 112 ≤ λ ≤ 126 nm from a free electron laser and event-triggered, fast-framing, multi-mass imaging detection methods. Contributions from at least five primary photofragmentation pathways yielding CH₂, CH₃ and/or H atom products are demonstrated and interpreted in terms of unimolecular decay following rapid non-adiabatic coupling to the ground state potential energy surface. These data serve to highlight parallels with methane photochemistry and limitations in contemporary models of the photoinduced stratospheric chemistry of the gas giants. The work identifies additional photochemical reactions that require incorporation into next generation extraterrestrial atmospheric chemistry models which should help rationalise hitherto unexplained aspects of the atmospheric ethane/acetylene ratios revealed by the Cassini–Huygens fly-by of Jupiter.

The vacuum ultraviolet photodissociation dynamics of ethane provide clues for modelling the atmospheric chemistry of the gas giants.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry

A simple procedure was developed for the speciation of inorganic arsenic by electrochemical hydride generation atomic absorption spectrometry (EcHG–AAS), without pre-reduction of As(V). Glassy carbon was selected as cathode material in the flow cell. An optimum catholyte concentration for simultaneous generation of arsine from As(III) and As(V) was 0.06 mol l⁻¹ H₂SO₄. Under the optimized conditions, adequate sensitivity and difference in ratio of slopes of the calibration curves for As(III) and As(V) can be achieved at the electrolytic currents of 0.6 and 1 A. The speciation of inorganic arsenic can be performed by controlling the electrolytic currents, and the concentration of As(III) and As(V) in the sample can be calculated according to the equations of absorbance additivity obtained at two selected electrolytic currents. The calibration curves were linear up to 50 ng ml⁻¹ for both As(III) and As(V) at 0.6 and 1 A. The detection limits of the method were 0.2 and 0.5 ng ml⁻¹ for As(III) and As(V) at 0.6 A, respectively. The relative standard deviations were of 2.1% for 20 ng ml⁻¹ As(III) and 2.5% for 20 ng ml⁻¹ As(V). The method was validated by the analysis of human hair certified reference material and successfully applied to speciation of soluble inorganic arsenic in Chinese medicine.     

Electrochemical studies of the oxidation mechanism of polyamide on glassy carbon electrode

Polyamides containing N-methyl pyrroles and N-methyl imidazoles are a type of small molecule that can bind and recognize the bases of DNA with high affinity and specificity. Five polyamides were studied at glassy carbon electrode in acetate buffer by cyclic and differential pulse voltammetry to clarify their redox pathways. The polyamide electrochemical responses are compared by peak currents and peak potentials. The slopes of the three anodic E_p vs. pH plots of a typical polyamide are linear and show 0.059, 0.057, 0.056 V per pH in acid media, respectively, which correspond to a mechanism involving the equal number of electrons and protons. A possible mechanism for the redox pathway of various polyamides is proposed: the oxidation product of imidazole ring is acylamide and the results of in situ UV–Vis spectroscopy at Pt web electrode support the proposed mechanism. electrospray ionization mass spectroscopy (ESI-MS) indicates that one or two oxygen atoms are added into polyamide molecule after electrochemical oxidation.     

超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查染发剂中32种染料成分

建立了超高效液相色谱-四极杆/静电场轨道阱高分辨质谱快速筛查和分析染发剂中32种禁限用染料的分析方法。样品经甲醇-2 g/L抗坏血酸水溶液溶解提取,正己烷净化,用ZORBAX Eclipse Plus C_(18)(3.0 mm×100 mm,1.8μm)色谱柱分离,以甲醇-5 mmol/L乙酸铵水溶液为流动相进行梯度洗脱,采用正、负离子切换同时测定了32种染料成分,显著提高了检测通量。以全扫描模式下提取的保留时间和一级母离子精确质量数以及同位素丰度比,实现对染发剂中多种染料成分的快速筛查;以自动触发采集的二级碎片离子精确质量数进行确证。32种染料在相应的质量浓度范围内线性关系良好,相关系数(r~2)均大于0.99;定量下限(LOQ)为0.2～40μg/g,回收率为81.0%～110%,相对标准偏差(RSD)为3.3%～9.9%。该方法简单、准确、快速,适用于染发剂中多种禁限用染料成分的高通量快速定性筛查和定量分析。     

基于SnO2为修饰层的Au-Pt / SnO2 / Au复合电极研究

用真空镀膜法在Au电极上沉积SnO₂薄膜，在HAuCl₄和H₂PtCl₄的混合溶液中利用直接还原法，将Au-Pt双金属纳米颗粒组装在SnO₂ / Au电极上，得到Au-Pt / SnO₂ / Au复合电极。采用SEM、TEM、XPS及CV曲线测定对Au-Pt / SnO₂ / Au复合电极进行了表征。结果表明:复合电极上双金属纳米颗粒分布均匀，粒子粒径约为25 nm左右。SnO₂作为修饰层以配位键与双金属纳米粒子结合。Au-Pt / SnO₂ / Au复合电极具有良好对甲醇氧化的电化学性能。     

Synthesis of a digermane-containing tricylic nonadecadienedione incorporating an equivalent of ring-opened THF

The combination of 2 equiv of bis[bis(trimethylsilyl)amide]germylene (5) with 2 equiv of 4-phenyl-1,2,4-triazoline-3,5-dione (PTAD) in tetrahydrofuran (THF) results in the ring-opening of 1 equiv of THF to form 2,2,8,8-tetrakis(1,1,1,3,3,3-hexamethyl-disilazan-2-yl)-5,16-diphenyl-7,9,14-trioxa-1,3,5,16,18,19-hexaaza-2,8-digerma-tricyclo[13.2.1.13,6]nonadeca-6(19),15(18)-diene-4,17-dione (6). This fast and nearly quantitative reaction builds a 15-membered ring from five different molecules. The new ring, structurally assigned by X-ray crystallography, contains a flexible methylene chain that moves rapidly on the NMR time scale.     

不同嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为

采用氢核磁共振(¹H-NMR)、动态光散射(DLS)及透射电子显微镜(TEM)对聚乙二醇-嵌段-聚甲基丙烯酸N,N-二甲氨基乙酯(PEG-b-PDMAEMA)三种具有不同PEG/PDMAEMA嵌段比的PEG-b-PDMAEMA共聚物在水溶液中的自聚集行为进行了研究. 研究表明, 两嵌段比例是影响聚合物胶束化过程的关键因素: 只有当其中聚乙二醇含量较低(质量分数低于33%)时, 聚合物才具有其pH/温度敏感胶束化特性. 此外, 共聚物溶液随温度胶束化过程与共聚物嵌段比大小密切相关. PEG-b-PDMAEMA这种不同于传统双亲性嵌段共聚物(DHBCs)在选择性溶剂中独特的胶束化行为, 是由聚合物溶液体系中各种基团之间的氢键作用决定的.