军用运输机机舱有源消声实验系统的设计与实现

为验证有源消声技术在军用运输机机舱低频噪声消除方面的有效性,设计和实现了一套机舱有源消声实验系统。采用“激振器+舱壁板”方式实现了飞机螺旋桨对机舱诱导噪声的声源模拟,设计了基于前馈控制结构的自适应有源噪声控制系统,构建了基于FX-LMS算法的自适应消声控制器,采用监测麦克风组对舱内空间的消声效果进行监测。实验结果验证了自适应有源噪声控制技术在军用飞机舱室消声降噪领域的有效性,并表明初、次级声源间距对自适应有源消声系统的消声效果具有重要的影响。     

离子色谱测定土壤中Cl-和SO2-4

介绍了离子色谱法测定土壤中Cl-和SO2-4的可行性以及相关的前处理方法,通过一定前处理方法,减少土壤中杂质对测定的干扰和对色谱柱的污染.有效选取提取液的种类和浓度及提取时间,准确测定了土壤中Cl-和SO2-4含量.Cl-和SO2-4的相对标准偏差分别为2.70%、2.89%,检出限分别为0.1950、0.2230μg·mL-1,平均回收率分别为106.7%,95.8%.方法简便,快速、灵敏度高.     

Reverse α–α´ phase separation in Fe-20Cr-6Al alloy

The reverse α–α′ phase separation in Fe-20Cr-6Al alloys has been monitored by differential scanning calorimetry in as-hot rolled and recrystallized samples previously aged at 435?°C. The splitting in the position of the minima, and the increasing enthalpy change involved, might be explained in terms of dissolution of α′ particles with different compositions and volume fractions. These results are fully consistent with the α–α′ phase separation kinetics determined by atom probe tomography during ageing at 435?°C. The monitoring of activation energy for α′ dissolution indicates that it is faster in as-hot rolled samples. Finally, the activation energy evolution indicates that there is first a dissolution of β′ Fe(AlTi) phase followed by α′ dissolution.     

Phase transformation in Sm2O3 at high pressure: In situ synchrotron X-ray diffraction study and ab initio DFT calculation

Sm₂O₃ was compressed at room temperature up to 44.0 GPa and then decompressed back to ambient pressure. In situ X-ray diffraction was used to monitor the structural changes in the sample. A cubic to hexagonal phase transformation was observed in Sm₂O₃ for the first time. After decompression back to ambient pressure, the hexagonal phase was not quenchable and transformed to a monoclinic phase. Ab initio Density- Functional-Theory (DFT) calculations were performed to obtain theoretical data for comparison with the experimental results and elucidation of the transformation mechanism. A possible phase transformation mechanism that is consistent with the experimental results and theoretical calculations is proposed.     

Study of a millimeter-wave squint indirect holographic algorithm suitable for imaging with large field-of-view

In this paper a millimeter-wave （MMW） squint indirect holographic method is presented, which is suitable for imaging with a large field-of-view. The proposed system employs the squint operation mode to remove the background and twin- image interferences, which achieves a similar effect to off-axis holography but leaves out the large-aperture quasi-optical component. The translational scanning manner enables a large field of view and ensures the image uniformity, which is difficult to realize in off-axis holography. In addition, a corresponding imaging algorithm for the presented scheme is developed to reconstruct the image from the recorded hologram. Some imaging results on typical objects, obtained with electromagnetic simulation, demonstrate good performance of the imaging scheme and validate the effectiveness of the image reconstruction algorithm.     

高温超导电缆直流测试电源平台的搭建

根据高温超导电缆测试用直流电源平台的要求,建立了硬件平台。该平台为模块化结构,具有输出精度高,便于扩展等特点;为方便操作,建立了基于LabVIEW的软件平台,对直流电源平台进行远程控制,并给出了远程控制的程序流程图,实现了电流的匀速上升和下降以及上升过程中的中断操作;利用该电源平台进行了超导电缆的临界电流测试实验,验证了直流电源平台符合高温超导电缆的测试要求。     

脂肪胺铜配合物催化合成1-苯基-2-硝基乙醇

合成了以3-二乙胺基丙胺为配体的新型铜金属配合物,通过元素分析和红外光谱对其结构进行了表征.将其用于催化苯甲醛与硝基甲烷反应得到产物1-苯基-2-硝基乙醇,并探讨溶剂、催化剂用量和三乙胺等因素对催化反应的影响.结果表明:在三乙胺存在的条件下,以甲醇为溶剂、以10mol％的配合物为催化剂,该金属配合物具有良好的催化活性.     

Ultrafast photo-induced turning of magnetization and its relaxation dynamics in GaMnAs

We report that,by linearly polarized pumping of different wavelengths,Kerr transients appear at zero magnetic field only in the case when GaMnAs samples are initialized at 3 K by first applying a 0.8 Tesla field and then returning to zero field.We find that,instead of magnetization precession,the near-band gap excitation induces a coherent out-of-plane turning of magnetization,which shows very long relaxation dynamics with no precession.When photon energy increases,the peak value of the Kerr transient incre...     

介质壁加速腔加速结构优化

为了在介质壁加速器中增大轴向加速电场, 提高加速梯度的同时抑制径向电场对束包络的扩张, 提出了在每个加速电极上添加金属栅网结构。采用基于粒子云网格方法的电磁粒子模拟软件对不加栅网与添加栅网的电极结构进行了数值仿真, 分析了不同结构下加速管道中的电场分布和束包络变化。通过实验对比了两种不同结构下经过相同的加速长度获得的粒子能量。结果表明:添加金属栅网结构相对于不加栅网的金属小孔式结构, 轴向加速电场强度提高20%, 同时径向电场得到有效抑制;栅网结构下, 被加速的粒子束在自由漂移空间中的径向发散基本得到抑制;在相同的加速长度下加速H3+粒子, 栅网结构得到的能量增益提高了一倍。     

约束梁柱构件抗火性能研究进展

约束构件抗火性能和抗火设计是近年国内外相关学者关注的热点之一.笔者简要介绍了约束构件(包括约束梁、约束柱)抗火性能所取得的成果,总结了约束构件在火灾下的工作行为、抗火性能研究以及抗火设计方法的进展,指出了约束构件抗火研究目前存在的主要问题,并对下一步工作进行了展望.