掺钕聚甲基丙烯酸甲酯的光学特性

研究了制备的掺钕螯合物Nd(DBM)3Phen材料的吸收光谱、激发光谱、荧光光谱,应用Judd-Ofelt理论计算了该材料的强度参量．分析了钕离子激发态4F3／2的辐射寿命(631 μs)和4F3／2→4IJ′跃迁的受激发射截面和荧光分支比．     

~ Transform Demonstration of Dark Soliton Solutions Found by Inverse Scattering

One of the basic problems about the inverse scattering transform for solving a completely integrable nonlinear evolutions equation is to demonstrate that the Jost solutions obtained from the inverse scattering equations of Cauchy integral satisfy the Lax equations. Such a basic problem still exists in the procedure of deriving the dark soliton solutions of the NLS equation in normal dispersion with non-vanishing boundary conditions through the inverse scattering transform. In this paper, a pair of Jost solutions with same analytic properties are composed to be a 2 × 2 matrix and then another pair are introduced to be its right inverse confirmed by the Liouville theorem. As they are both 2 × 2 matrices, the right inverse should be the left inverse too, based upon which it is not difficult to show that these Jost solutions satisfy both the first and second Lax equations. As a result of compatibility condition, the dark soliton solutions definitely satisfy the NLS equation in normal dispersion with non-vanishing boundary conditions.     

基于队列式缓存结构的视频图像存储算法

针对视频图像数据实时存储过程中普遍存在的丢帧问题,通过深入分析典型的存储算法,找出实时存储过程中视频图像数据丢失的原因：计算机在连续存储相同大小的文件时,存储速度在一定的范围内波动.本文采用队列式缓存结构有效地消除了存储速度波动所带来的影响,保证了在数据流速小于磁盘平均存储速度的前提下,高速视频图像数据的实时存储,解决了丢帧问题.实践验证了该算法的可行性与可靠性.     

10 Gb/s光纤通信系统一阶偏振模色散动态补偿系统反馈控制的实现

在偏振模色散(PMD)自动补偿技术中,如何根据反馈信号得到相应的控制信号,使补偿速度跟随偏振模色散变化始终是该技术的一个核心问题。提出了一种新颖的自适应抖动跟踪算法,完成了以微波信号为反馈的多自由度的一阶偏振模色散自动反馈补偿系统的跟踪补偿实验。算法成功地解决了传统算法在跟踪搜索过程中易陷入局部极值的问题,有效地克服了系统中的重要控制器件偏振控制器的磁滞现象以及动态补偿时跟踪搜索过程中易出现的瞬间恶化现象。实验结果表明该算法在对出现突发偏振模色散扰动后自动进行补偿的响应速度在ms量级,最快能达到1~2 ms。     

Gas source MBE grown wavelength extended 2.2 and 2.5 μm InGaAs PIN photodetectors

Using homo-junction structure and relative thin linear graded In_xGa_1−xAs as the buffer layer, extended wavelength InGaAs PIN photodetectors with cut-off wavelength of 2.2 and 2.5 μm at room temperature have been grown by using GSMBE, and their performance over a wide temperature range have been extensively investigated. For those 2.2 or 2.5 μm detectors with 100 μm diameter, the typical dark current (V_R = 10 mV) and R₀A are 57 nA/10.3 Ω cm² or 67 nA/12.7 Ω cm² at 290 K, and 84 pA/4.70 kΩ cm² or 161 pA/3.12 kΩ cm² at 210 K respectively. The thermal activation energies of the dark current are 0.447 eV or 0.404 eV for 2.2 or 2.5 μm detectors respectively.     

铕与4-(4-吡啶甲酰基)苯甲酸配合物的合成与荧光性能研究

以Eu3+为中心离子,4-(4-吡啶甲酰基)苯甲酸(HPFBA)、1,10-菲罗啉(Phen)和三苯基氧膦(TPPO)为配体,合成了新型配合物Eu(PFBA)3(H2O)4,Eu(PFBA)3Phen(H2O)3和Eu(PFBA)3TPPO(H2O)3(PFBA=4-(4-吡啶甲酰基)苯甲酸根).红外光谱表明,形成配合...     

Two-dimensional photon counting imaging detector based on a Vernier position sensitive anode readout

A two-dimensional photon counting imaging detector based on a Vernier position sensitive anode is reported. The decode principle and design of a two-dimensional Vernier anode are introduced in detail. A photon counting imaging system was built based on a Vernier anode. The image of very weak optical radiation can be reconstructed by image processing in a period of integration time. The resolution is superior to 100 μm according to the resolution test. The detector may realize the imaging of very weak particle flow of high-energy photons, electrons and ions, so it can be used for high-energy physics, deep space exploration, spectral measurement and bio-luminescence detection.     

In-band pumped highly efficient Ho:YAG ceramic laser with 21 W output power at 2097 nm

We report on the high-power and high-efficiency operation of a polycrystalline Ho:YAG ceramic laser in-band pumped by a Tm fiber laser at ~1907 nm. Lasing characteristics of a 1.5 at.% and a 2.0 at.% Ho3?-doped YAG ceramic were investigated and compared. Using an output coupler of 6% transmission, over 21.4 W of cw output power at 2097 nm has been generated with the 1.5 at.% doped Ho:YAG ceramic under 35 W of incident pump power, corresponding to an average slope efficiency with respect to the incident pump power of 63.6% and an optical-to-optical conversion efficiency of 61.1%.     

分析信息机房热环境的加权等效温差法

信息机房是集中存储和管理各类数据处理设备的建筑空间,其热环境的好坏对于各类数据处理设备的连续稳定运行具有重要意义。本文在回顾近年来对机房热环境分析、评价方面的研究基础上,提出了热量加权等效温差法,从考察传热能力损失的角度重新分析机房内的传热和流动过程。以地板送风为例,建立一个实际机房模型,通过数值模拟,将目前常用的机房热环境评价方法与加权等效温差分析结果进行对比,验证该方法的可行性。计算表明,加权等效温差分析方法不仅能有效刻画机房气流组织和热源的分布特性,还能分析由此带来的冷热气流掺混、冷量输配不均等导致机房冷却效率低下的各类因素,并提出相应的改进措施,对信息机房的节能运行有重要的指导意义。     

Comparative investigation of resistance and ability to trigger high voltage discharge for single and multiple femtosecond filaments in air

A comparative investigation of resistance and ability to trigger high voltage (HV) discharge for single filament (SF) and multiple filaments (MF) has been carried out. The experimental results show that the trend of the breakdown threshold of the SF exactly follows that of its resistance, but this is not the case for the MF. The MF's resistance is much smaller than SF's. However, the MF shows a bit higher HV breakdown threshold than the SF. The underlying physics is that the measured resistance of the MF is collectively contributed by every filament in the MF while the HV breakdown threshold is determined by only one single discharging path.