Influence of Bi underlayer on the magnetic properties of Fe<Subscript>x</Subscript>Pt<Subscript>100-x</Subscript> (<Emphasis Type="BoldItalic">x</Emphasis> =<Emphasis Type="Bold">40</Emphasis>∼<Emphasis Type="Bold">58</Emphasis>) films

We have studied the effect of a Bi underlayer on ordering and coercivity H_c of Fe_xPt_100-x thin films (atomic content of Fe x=40∼58). We found that the Bi underlayer enhances H_c remarkably. After annealing at 400 °C for 20 min, a Bi/Fe₄₉Pt₅₁ film can realize an H_c as high as 1.07×10³ kA/m and a ratio of the remnant M_r to the saturated magnetization M_s as high as 0.93. The ordering process of FePt film was promoted by the diffusion of Bi atoms. Moreover, the Bi underlayer broadens the range of x for high H_c from 49∼55 to 43∼55. Interestingly, with Bi underlayer, the high H_c is affected by x to a less extent. PACS 75.50.Ss; 75.50.Vv; 75.60.Ej     

Predicting Atomic Decay Rates Using an Informational-Entropic Approach

We show that a newly proposed Shannon-like entropic measure of shape complexity applicable to spatially-localized or periodic mathematical functions known as configurational entropy (CE) can be used as a predictor of spontaneous decay rates for one-electron atoms. The CE is constructed from the Fourier transform of the atomic probability density. For the hydrogen atom with degenerate states labeled with the principal quantum number n, we obtain a scaling law relating the n-averaged decay rates to the respective CE. The scaling law allows us to predict the n-averaged decay rate without relying on the traditional computation of dipole matrix elements. We tested the predictive power of our approach up to n =?20, obtaining an accuracy better than 3.7% within our numerical precision, as compared to spontaneous decay tables listed in the literature.     

Segregation of Pt at clean surfaces of (Pt, Ni)3Al

Experimental evidence for surface segregation of Pt at (1 1 1) surfaces of ternary (Pt, Ni)₃Al alloys is presented, based upon Auger electron spectroscopy, low energy ion scattering, and angle-resolved X-ray photoelectron spectroscopy. Density functional calculations in the dilute limit confirm that Pt segregation is energetically favored.     

Simultaneous detection of resolved glutamate, glutamine, and gamma-aminobutyric acid at 4 T

A new approach is introduced to simultaneously detect resolved glutamate (Glu), glutamine (Gln), and gamma-aminobutyric acid (GABA) using a standard STEAM localization pulse sequence with the optimized sequence timing parameters. This approach exploits the dependence of the STEAM spectra of the strongly coupled spin systems of Glu, Gln, and GABA on the echo time TE and the mixing time TM at 4 T to find an optimized sequence parameter set, i.e., {TE, TM}, where the outer-wings of the Glu C4 multiplet resonances around 2.35 ppm, the Gln C4 multiplet resonances around 2.45 ppm, and the GABA C2 multiplet resonance around 2.28 ppm are significantly suppressed and the three resonances become virtual singlets simultaneously and thus resolved. Spectral simulation and optimization were conducted to find the optimized sequence parameters, and phantom and in vivo experiments (on normal human brains, one patient with traumatic brain injury, and one patient with brain tumor) were carried out for verification. The results have demonstrated that the Gln, Glu, and GABA signals at 2.2-2.5 ppm can be well resolved using a standard STEAM sequence with the optimized sequence timing parameters around {82 ms,48 ms} at 4 T, while the other main metabolites, such as N-acetyl aspartate (NAA), choline (tCho), and creatine (tCr), are still preserved in the same spectrum. The technique can be easily implemented and should prove to be a useful tool for the basic and clinical studies associated with metabolism of Glu, Gln, and/or GABA.     

Efficient passively Q-switched laser operation of Yb in the disordered NaGd(WO4)2 crystal host

Efficient passively Q-switched laser operation of the disordered Yb:NaGd(WO(4))(2) crystal is demonstrated for the first time to our knowledge with a Cr(4+):YAG saturable absorber by diode end pumping. 2.05 W of average output power at a pulse repetition frequency of 13.3 kHz was obtained at an absorbed pump power of 7.7 W, with a slope efficiency of 40%. The energy and duration of the generated laser pulse were 154 microJ and 33 ns, respectively, corresponding to a peak power of 4.67 kW. In continuous-wave operation, the Yb:NaGd(WO(4))(2) laser yielded an output power of 5.5 W with an optical-optical efficiency of 51%.     

Gain characteristics and optimization of dual-pump fiber optical parametric amplifier using two-section highly nonlinear fibers

In this paper the gain characteristics of two-pump fiber optical parametric amplifiers (FOPA) with two-section highly nonlinear fibers are analyzed numerically and the parameters of the fibers are optimized to reach broad and flat gain spectra using genetic algorithm. Different from the previous methods, here the space between two pump wavelengths and the parameter β₄ of the fibers are included as a pivotal factor in the optimization. The numerical simulation shows that using two-section practical high nonlinear fibers, the amplifier may reach 110 nm bandwidth covering 1495–1605 nm with 10.5 dB average gain and gain ripple of 0.17 dB, when the total pump power is 1 W.     

Upconversion fluorescence property of Er/Yb-codoped novel bismuth-germanium glass

Infrared-to-visible upconversion fluorescence property of Er³⁺/Yb³⁺-codoped novel bismuth-germanium glass under 975 nm LD excitation has been studied. Intense green and red emissions centered at 525, 546 and 657 nm, corresponding to the transitions ²H_11/2→⁴I_15/2, ⁴S_3/2→⁴I_15/2, and ⁴F_9/2→⁴I_15/2, respectively, were observed at room temperature. The quadratic dependence of the 525, 546 and 657 nm emissions on excitation power indicates that a two-photon absorption process occurs. The structure of the bismuth-germanium glass has been investigated by peak-deconvolution of FT-Raman spectrum, and the structural information was obtained from the peak wavenumbers. This novel bismuth-germanium glass with low maximum phonon energy (∼750 cm⁻¹) can be used as potential host material for upconversion lasers.     

Effect of the laser fluence on the surface characterization of β-FeSi2 films prepared by pulsed laser deposition

Single-phase β-FeSi₂ films on silicon (1 0 0) were fabricated by pulse laser deposition. The structure and crystal quality of the samples were characterized by X-ray diffraction and Fourier transform infrared spectroscopy. The field scanning electron microscopy showed that the film thickness increases with the increasing of the laser fluence. Moreover, atomic force microscopy observations revealed the changes of surface properties with different laser fluence. Based upon all experimental results, it is found that 7 J/cm² is the most favorable for the formation of β-FeSi₂ thin films.     

Improved fake mode free plane wave expansion method

We analyze the origin of the fake modes introduced by the plane wave expansion method with three-dimension (3D) supercell approximation. Through the detailed analysis of the energy distribution of fake modes and real modes, we propose the plane wave expansion-three planar-slab waveguides method to remove the fake modes and obtain the fake mode free band structure of a two-dimensional air hole photonic crystal slab. To the best of our knowledge, this is the first time that such a fake mode free photonic crystal band structure is presented. Our method is also definitely useful in designing other 3D devices.     

Lixiscope及几种材料的X射线吸收特性研究

介绍Lixiscope及模拟系统,测量了钛片(Ti)、玻璃板、镍片(Ni)和铝片(Al)对峰值能量为40keV的X射线的吸收持性,指出平板式X射线像增强器输入窗口材料选择的原则。