聚合物熔体界面扩散理论与研究方法

本文结合与聚合物加工过程密切相关的界面扩散问题,从动力学和热力学两方面综述了与聚合物界面互扩散相关的基础理论.结合在聚合物界面扩散方面的研究进展,系统介绍了聚合物熔体界面扩散的常用研究方法.对其中的流变学方法的原理及进展作了重点论述,该方法不仅可以有效表征聚合物熔体界面扩散的动力学过程,进一步从分子动力学角度发展并完善聚合物扩散理论,而且对于聚合物加工成型过程的界面结构设计和性能优化起到关键的指导作用.本文最后提出了聚合物熔体界面扩散研究中存在的问题并对其前景进行了展望.     

匀浆提取-超高效液相色谱-串联质谱法测定烟草中亚硝胺含量

提出了超高效液相色谱-串联质谱法测定烟草中N-亚硝基降烟碱(NNN)、N-亚硝基新烟草碱(NAT)、N-亚硝基假木贼碱(NAB)和4-甲基亚硝基吡啶基丁酮(NNK)等4种亚硝胺含量的方法。烟草样品经0.1mol.L-1乙酸铵溶液匀浆提取,离心分离取上清液过Waters AcquityUPLC BEH C18色谱柱(2.1mm×100mm,1.7μm)分离,以乙腈和0.01mol.L-1乙酸铵溶液按不同体积混合作流动相梯度洗脱。串联质谱测定中采用电喷雾离子源正离子模式和多反应监测模式检测,同位素内标法定量。NNK、NNN、NAB和NAT的检出限(3s)分别为0.06,0.17,0.15,0.053μg.L-1。方法的加标回收率在92.1%～104%之间;日内和日间相对标准偏差(n=7)分别为2.7%～3.3%和3.5%～4.2%。     

三维多面体网格上扩散方程的保正格式

 针对三维任意(星形)多面体网格, 本文构造了扩散方程的一种单元中心型非线性有限体积格式, 证明了该格式具有保正性. 在该格式设计中, 除引入网格中心量外, 还引入网格节点量和网格面中心量作为中间未知量, 它们将用网格中心未知量线性组合表示, 使得格式仅有网格中心未知量作为基本未知量. 在节点量计算中, 利用网格面上的调和平均点, 设计了一种适用于三维多面体网格的局部显式加权方法. 该格式适用于求解非平面的网格表面和间断扩散系数的问题. 数值例子验证了它对光滑解具有二阶精度和保正性.     

Influence of surface properties on the interfacial adhesion in carbon fiber/epoxy composites

A polyacrylonitrile‐based carbon fiber was electrochemically oxidized in an aqueous ammonium bicarbonate solution with current density of up to 2.76 A/m² at room temperature. X‐ray photoelectron spectroscopy revealed that the oxygen content increased with increasing current density before approaching saturation. The increase can be divided into two regions, the rapid increase region (0–1.78 A/m²) and a plateau region (1.78–2.76 A/m²). The surface chemistry analysis showed that the interlaminar shear strength (ILSS) value of the carbon fiber/epoxy composite could be improved by 24.7%. The carbon structure was examined using Raman spectroscopy in terms of order/disorder in the graphite structure and the results indicated that the relative percentage of graphite carbon in the form of sp² hybridization increased above a current density of 1.39 A/m². The increasing non‐polar graphite carbon on the carbon fiber surface decreased the surface energy. As a result, both the surface free energy () and its polar component () decreased when current density increased above 1.78 A/m². The ILSS value had no direct relationship with the nature and surface density of the oxygen‐containing functional groups nor with the carbon structure. It is the surface free energy (), especially the polar component (), which played a critical role in affecting the interfacial adhesion of carbon fiber/epoxy composites. The ILSS value changed with increasing current density and could be divided into three distinct regions, as chemical interaction region (I), anchor force region (II) and matrix damage region (III). Copyright © 2013 John Wiley & Sons, Ltd.     

Study of Cl−(H2O)n (n = 1–4) using basin‐hopping method coupled with density functional theory

Cl^?(H₂O)_n (n = 1–4) clusters were investigated using a basin‐hopping (BH) algorithm coupled with density functional theory (DFT). Structures, energetics, thermodynamics, vertical detachment energies, and vibrational frequencies were obtained from high‐level ab initio calculations. Through comparisons with previous theoretical and experimental data, it was demonstrated that the combination of the BH method and DFT could accurately predict the global and local minima of Cl^?(H₂O)_n (n = 1–4). Additionally, to optimize larger Cl^?(H₂O)_n (n > 4) clusters, several popular density functionals as well as DF‐LMP2 (Schütz et al., J. Chem. Phys. 2004, 121, 737) (second‐order Møller‐Plesset perturbation theory using local and density fitting approximations) were tested with appropriate basis sets through comparisons with MP2 optimized results. DF‐LMP2 will be used in future studies because its overall performance in describing the relative binding energies and the geometrical parameters of Cl^?(H₂O)_n (n = 1–4) was outstanding in this study. © 2013 Wiley Periodicals, Inc.     

Determination of fatty acids in soil samples by gas chromatography with mass spectrometry coupled with headspace solid‐phase microextraction using a homemade sol–gel fiber†

Through the use of a homemade sol–gel‐derived fiber, a headspace solid‐phase microextraction technique coupled to gas chromatography with mass spectrometry was developed for the determination of fatty acids with long, even‐numbered carbon chains (C₁₂–C₂₄) in soil samples. The experimental parameters such as reaction time, temperature, and ionic strength that might affect derivatization, extraction, and desorption were investigated. Under the optimized conditions, the linearity of the method ranged from 0.1 to 100 mg/L with a correlation coefficient >0.997. The limit of detection values based on a signal‐to‐noise ratio of 3:1 were determined with the concentration from 0.39 to 39.4 μg/L. The recoveries of the method for the soil samples were from 91.15 to 108.1%. This developed method using a homemade fiber showed a higher sensitivity than that using a commercial polydimethylsiloxane fiber and was also for the analysis of real soil samples from the Paomaling geological park of China.     

Tissue imaging and serum lipidomic profiling for screening potential biomarkers of thyroid tumors by matrix-assisted laser desorption/ionization-Fourier transform ion cyclotron resonance mass spectrometry

Changes in serum lipidome and in tissue lipidome are associated with cancer. In this study, tissue mass spectrometry imaging (MSI) and serum lipid profiling by matrix-assisted laser desorption/ionization-Fourier transform ion cyclotron resonance mass spectrometry (MALDI-FTICR MS) were performed to investigate significantly changed lipids in both tumor (malignant thyroid cancer (MTC) and benign thyroid tumor (BTT)) tissues and sera. Y-scatterplots of variable importance in the projection (VIP) values vs. fold change values indicate that change trends in the levels of ten lipids (i.e., phosphatidylcholine (PC)(34:1), PC(36:1), PC(38:6), phosphatidic acid (PA) (36:2), PA(36:3), PA(38:3), PA(38:4), PA(38:5), PA(40:5), and sphingomyelin (SM)(34:1)) in both tissues and sera from MTC patients, BTT patients, and normal individuals are significantly associated with these three types of pathophysiological status. In order to examine their diagnostic ability, 289 serum samples from 124 MTC patients, 43 BTT patients, and 122 normal controls were randomly divided into the training set and validation set. A biomarker of PC(34:1) exhibited excellent diagnostic ability to differentiate both MTC and BTT patients from normal individuals, with an area under the receiver operating characteristic (ROC) curve value of 0.984, a sensitivity of 96.4 %, and a specificity of 92.7 %. A panel which included PA(36:3) and SM(34:1) could distinguish between MTC and BTT, with an area under receiver operating characteristic curve (AUC) of 0.961, a sensitivity of 87.8 %, and a specificity of 92.9 %. It is worth noting that a panel consisting of PC(34:1), PA(36:3), and SM(34:1) could differentiate MTC patients from both BTT patients and normal individuals, with an AUC of 0.841, a sensitivity of 86.6 %, and a specificity of 75.5 %.

Mechanism for nucleation and growth of electrochemical deposition of palladium(II) on a platinum electrode in hydrochloric acid solution

Palladium(II)and chloride ions tend to form complexes in aqueous solution.Both theoretical and experimental(by UV spectrum)results indicate that there are four complexes formed in aqueous solution containing 3 mol/L hydrochloric acid and 20mmol/L PdCl2.This work evaluates the kinetics of electrochemical deposition of palladium on a Platinum electrode.For this purpose,palladium electrodeposition was investigated by means of cyclic voltammetry(CV),potentiostatic current-time transients(CTTs)and Tafel curve.By CTTs curves,the regions corresponding to the charge transfer control,mixed control and diffusion control were identified.In the diffusion control region,palladium electrodeposition mechanism was characterized as progressive nucleation with three-dimensional(3D)growth under diffusion control;as for the mixed control region,an adsorption(IAds),ion transfer(IIT),and nucleation and growth(ING)model were proposed to analyze the current-time transients quantitatively,which could separate the IAds,IIT and ING perfectly.     

A Luminescent Hypercrosslinked Conjugated Microporous Polymer for Efficient Removal and Detection of Mercury Ions

A hypercrosslinked conjugated microporous polymer (HCMP‐1) with a robustly efficient absorption and highly specific sensitivity to mercury ions (Hg²⁺) is synthesized in a one‐step Friedel–Crafts alkylation of cost‐effective 2,4,6‐trichloro‐1,3,5‐triazine and dibenzofuran in 1,2‐dichloroethane. HCMP‐1 has a moderate Brunauer–Emmett–Teller specific surface (432 m² g⁻¹), but it displays a high adsorption affinity (604 mg g⁻¹) and excellent trace efficiency for Hg²⁺. The π–π* electronic transition among the aromatic heterocyclic rings endows HCMP‐1 a strong fluorescent property and the fluorescence is obviously weakened after Hg²⁺ uptake, which makes the hypercrosslinked conjugated microporous polymer a promising fluorescent probe for Hg²⁺ detection, owning a super‐high sensitivity (detection limit 5 × 10⁻⁸ mol L⁻¹).

     

二维配位聚合物[Tb(1,4⁃bdc)1.5(phen)(H2O)]n的合成、晶体结构及对Fe3+离子的荧光检测

通过溶剂热反应成功合成出一种新型2D配位聚合物[Tb(1,4-bdc)_1.5(phen)(H₂O)]_n(1)(1,4-H₂bdc=对苯二甲酸;phen=菲咯啉)。对其进行了单晶X射线衍射、粉末X射线衍射、红外光谱、元素分析、荧光光谱表征。X射线衍射晶体学分析表明,配合物1结晶于三斜晶系P1空间群,2个相邻的Tb(Ⅲ)离子与4个1,4-bdc^2-通过—O—C—O—桥联成双核单元,并进一步通过1,4-bdc^2-桥联成二维层状结构。荧光实验证明配合物1可以通过荧光猝灭机制检测Fe₃₊,Ksv=8.39×10³ L·mol-1,检测限为0.017μmol·L^-1。