Synthesis of Polycyclic Indole Skeletons by a Gold(I)‐Catalyzed Cascade Reaction

The conversion of simple, easily available urea‐substituted 3‐phenylpropargyl alcohols catalyzed by a simple IPr–gold(I) catalyst in a gold(I)‐catalyzed cascade reaction composing of a gold‐catalyzed nucleophilic addition and a subsequent gold‐catalyzed substitution reaction delivers 1H‐imidazo[1, 5?a]indol‐3(2 H)‐ones. Other gold(I) catalysts or silver catalysts gave lower yields and often gave other side products. Gold(III) and copper(II) catalysts decomposed the starting material. Twelve examples, including donor and acceptor substituents on the distal nitrogen of the urea substructure, are provided. An X‐ray crystal structure analysis confirmed the structural assignment. The mechanistic investigation including isolation and further conversion of intermediates and reactions with enantiopure starting materials indicated that after the nucleophilic‐addition step, the substrate undergoes an S_N1‐type benzylic substitution reaction at the indolyl alcohol intermediate or an intramolecular hydroamination reaction of the 2‐vinylindole intermediate.     

侧链为端羧基聚乙二醇的梳形聚氨酯的合成与表征

以L-赖氨酸、乙二胺和端羧基聚乙二醇(PEG)为原料合成一种带聚乙二醇侧链的二元胺扩链剂(Lys-NH-PEG),然后以4,4'-二苯基甲烷二异氰酸酯(MDI)和Lys-NH-PEG为硬段,聚碳酸酯二醇(PCD)为软段,制备一种含端羧基聚乙二醇侧链的梳形聚氨酯.对所合成聚氨酯材料进行傅立叶变换红外光谱(FTIR)、氢核磁共振谱(1H-NMR)、凝胶渗透色谱(GPC)测试,测试结果表明得到了目标聚合物.该聚合物能在水中形成胶体,并能化学接枝白蛋白,表明所合成的聚氨酯的PEG侧链端羧基具有反应活性.这种具有可反应性的聚氨酯为进一步接枝生物分子以提高生物相容性提供了广阔的空间.     

基于三唑配体的金属锰(Ⅱ)、锌(Ⅱ)配合物的合成、晶体结构与性质研究(英文)

在不同反应条件下,采用三唑衍生物作为配体与乙酸锰和硝酸锌反应,合成了2个具有三维结构的配位化合物{Mn(pytyba)(H2O)3]·2H2O}n(1)和{[Zn(pytyba)(H2O)3]·4H2O}n(2),并通过元素分析、热重分析、荧光性、X射线单晶衍射对化合物进行分析。结构分析表明1和2有许多共同特征:两个聚合物的晶体均属于单斜晶系,C2/c空间群,Mn2+和Zn2+均为六配位畸变八面体配位结构,具有相似的热稳定性、荧光性以及相近的孔隙率。配体中的氧原子与金属离子配位形成一维链状结构,然后又通过O-H…N、O-H…O氢键作用和π…π芳香堆积形成超分子结构。此外,通过测定化合物抗氧化活性(SOD)的经典方法-Marklund法对配合物1和2的抗氧化活性进行了研究。     

光催化合成金属Ag纳米颗粒的生长机制——晶核密度控制的生长模式转换

利用AgNO3水溶液,通过严格控制TiO2薄膜的化学活性,系统研究了在TiO2表面光催化合成金属Ag纳米颗粒的生长行为。研究发现,光催化合成金属Ag纳米颗粒存在着两个完全不同的生长机制,分别对应着金属Ag纳米颗粒的各向同性和各向异性生长。当溶液浓度较低时,Ostwald熟化(OR)机制主导着金属Ag纳米颗粒的长大过程;当溶液浓度较高时,取向附生(OA)机制决定着金属Ag纳米颗粒长大成纳米片。原位消光光谱分析表明,OR机制和OA机制生长的前期具有相近消光特征,决定金属Ag纳米颗粒生长模式的关键是AgNO3溶液的浓度,更准确地说是金属Ag初级晶核的局域密度。在此基础上提出了有关光催化合成金属Ag纳米颗粒的生长模型。     

采用CO吸附原位红外光谱研究Pt/TiO_2光催化体系中助催化剂作用

采用CO作为探针分子,将原位透射红外光谱应用于研究助催化剂Pt在Pt/TiO2光催化体系中的作用.实验发现,光照条件下,CO的覆盖度及样品温度没有明显变化,CO在Pt/TiO2上的吸附峰红移11 cm–1,在Pt/Al2O3上的吸附峰没有位移,表明CO在Pt/TiO2上的红移来源于TiO2上的光生电子转移到Pt上,这解释了为什么加入Pt助催化剂可提高光催化产氢活性.     

Detoxifying CO2 Capture Reclaimer Waste by Anaerobic Digestion

The decrease in toxicity of carbon capture reclaimer monoethanolamine (MEA) waste (MEAw) during anaerobic degradation of such waste together with easily degradable organics was investigated. Samples were collected from a bioreactor at steady state with 86 % organic chemical oxygen demand removal at room temperature, which had been running on MEAw for 2 years. The toxicity of the digester effluents were 126, 42 and 10 times lower than that of the MEAw to the tested freshwater trophic groups of Pseudokirchneriella subcapitata, Daphnia magna and embryos of Danio rerio, respectively. The toxicity of the tested taxonomic groups after anaerobic digestion was mainly attributed to the ammonia generated by the degradation of MEAw.     

Blind prediction of HIV integrase binding from the SAMPL4 challenge

Here, we give an overview of the protein-ligand binding portion of the Statistical Assessment of Modeling of Proteins and Ligands 4 (SAMPL4) challenge, which focused on predicting binding of HIV integrase inhibitors in the catalytic core domain. The challenge encompassed three components—a small “virtual screening” challenge, a binding mode prediction component, and a small affinity prediction component. Here, we give summary results and statistics concerning the performance of all submissions at each of these challenges. Virtual screening was particularly challenging here in part because, in contrast to more typical virtual screening test sets, the inactive compounds were tested because they were thought to be likely binders, so only the very top predictions performed significantly better than random. Pose prediction was also quite challenging, in part because inhibitors in the set bind to three different sites, so even identifying the correct binding site was challenging. Still, the best methods managed low root mean squared deviation predictions in many cases. Here, we give an overview of results, highlight some features of methods which worked particularly well, and refer the interested reader to papers in this issue which describe specific submissions for additional details.     

Stepwise Assembly of Turn-on Fluorescence Sensors in Multicomponent Metal–Organic Frameworks for in Vitro Cyanide Detection

The controlled synthesis of multicomponent metal–organic frameworks (MOFs) allows for the precise placement of multiple cooperative functional groups within a framework, leading to emergent synergistic effects. Herein, we demonstrate that turn-on fluorescence sensors can be assembled by combining a fluorophore and a recognition moiety within a complex cavity of a multicomponent MOF. An anthracene-based fluorescent linker and a hemicyanine-containing CN⁻-responsive linker were sequentially installed into the lattice of PCN-700. The selective binding of CN⁻ to hemicyanine inhibited the energy transfer between the two moieties, resulting in a fluorescence turn-on effect. Taking advantage of the high tunability of the MOF platform, the ratio between anthracene and the hemicyanine moiety could be fine-tuned in order to maximize the sensitivity of the overall framework. The optimized MOF-sensor had a CN⁻-detection limit of 0.05 μm , which is much lower than traditional CN⁻ fluorescent sensors (about 0.2 μm ).     

Design,synthesis and insecticidal-activity evaluation of N-pyridylpyrazolo-5-methyl amines and its derivatives

In searching for novel insecticidal leads, a series of N-pyridylpyrazolo-5-methyl amines and their derivatives were designed and synthesized. Among the 22 target compounds obtained, bioassays indicated that some of the target compounds exhibited good insecticidal activities against Plutella xylostella (P. xylostella) and Spodoptera frugiperda (S. frugiperda). In particular, compound 9j revealed the best insecticidal activity against P. xylostella, with a LC₅₀ value of 22.11 mg/L, and compound 9q had the best insecticidal activity against S. frugiperda which with 73.99% of mortality rate at 100 mg/L. Structure-activity relationship (SAR) analysis showed that 4-CF₃ at the position of R¹ linked with N-pyridylpyrazole via amide bond could enhance the insecticidal activity of the target compounds. This study provides valuable clues for the further design and optimization of N-pyridylpyrazole derivatives.     

单分子电导测量技术及其影响因素

Molecular electronics is an important field for the application of nanotechnologies with an ultimate goal of building functional devices using single molecules or molecular arrays to realize the same functionality as macroscopic devices. To attain this goal, reliable techniques for measuring and manipulating electron transfer processes through single molecules are essential. There are various techniques and many environmental factors influencing single-molecule electronic conductance measurements. In this review, we first provide a detailed introduction and classification of the current well-accepted techniques in this field for measuring single-molecule conductance. All available techniques are summarized into two categories: the fixed junction technique and break junction technique. The break junction technique involves repeatedly forming and breaking molecular junctions by mechanically controlling a pair of electrodes moving into and out of contact in the presence of target molecules. Single-molecule conductance can be determined from the conductance plateaus that appear in typical conductance decay traces when molecules bind two electrodes during their separation process. In contrast, the fixed junction technique is to fix the distance between a pair of electrodes and measure the conductance fluctuations when a single molecule binds the two electrodes stochastically. Both techniques comprise different application methods and have been employed preferentially by different groups. Specific features of both techniques and their intrinsic advantages are compared and summarized in Section 4.