锥形光纤中光波传输特性的蒙特卡罗模拟

为了分析锥形光纤中光子流的传输特性和空间分布特性,采用了蒙特卡罗算法对其进行了模拟仿真,得到了大量光子经过锥形光纤后的光子分布图.模拟实验结果表明,通过锥形光纤的大量光子集中在探测器中心,到达探测器某一位置的光子数随着该位置到探测器中心距离的增加而减少,并且在锥形光纤锥度比一定的条件下,改变锥形光纤长度,光强度随着长度的增加而下降,但通过锥形光纤的光子分布是一样的.这些研究结果对锥形光纤的设计和实际应用提供了重要依据.     

Design studies on the 4π γ-ray calorimeter for the ETF experiment at HIRFL-CSR

A high detection efficiency calorimeter which is used to detect γ-rays with energies from 1 MeV up to 10 MeV as well as light charged particles has been proposed. Design of the geometry, results of the crystal tests and Monte Carlo simulations are presented in this paper. The simulation results confirm that the calorimeter can obtain high detection efficiency and good energy resolution with the current designed geometry. And the calorimeter is competent for the future External Target Facility (ETF) experiments.     

Configuration of the valence neutrons of 17B

The reaction cross section of ~(17)B on ~(12)C target at(43.7±2.4)MeV/u has been measured at the Radioactive Ion Beam Line in Lanzhou(RIBLL).The root-mean-square matter radius(R_(rms))was deduced to be(2.92±0.10)fm,while the R_(rms)of the core and the valence neutron distribution are 2.28 fm and 5.98 fm respectively.Assuming a"core plus 2n"structure in ~(17)B,the mixed configuration of(2s_(1/2))and(1d_(1/2))of the valence neutrons is studied and the s-wave spectroscopic factor is found to be(80±21)%.     

Theoretical description of improving measurement accuracy for incoherence Mie Doppler wind lidar

For the nonlinearity of Fabry-Perot interferometer(FPI) transmission spectrum,the measurement uncertainty of incoherent Mie Doppler wind lidar based on it increases evidently with the increase of backscattering signal Doppler shift.A method of repeating the use of the approximate linear part of FPI transmission spectra for reducing the high uncertainty of a big Doppler shift is proposed.One of the ways of realizing this method is discussed in detail,in which the characteristics of FPI transmission spectrum changing with thickness and incident angle are utilized simultaneously.Under different atmosphere conditions,it has been proved theoretically that the range of measurement uncertainty drops to one-sixth while its minimum has no serious change.This method can be used not only to guide the new system design,but also as a new working way for the fabricated system.     

Optimization on Synchrotron Radiation Lattice of BEPCII

The Beijing Electron and Positron Collider II （BEPCII） is a double ring electron positron collider, which can also be used as a synchrotron radiation （SR） light source. Since the BEPCII will start commissioning with SR mode in November 2006, it is essential to have a satisfying SR lattice. Here we first perform frequency map analysis on the original BEPCII SR lattice. The result shows that the resonance is really severe in the lattice and the transverse motion of particles is unstable. Then a new SR lattice is designed to obtain a large dynamic aperture and much more stable transverse motion. The dynamic aperture of the new lattice including nonlinear wiggler effect is calculated to be very good. This new SR lattice can be used in the commissioning stage of the BEPCII.     

Measurement of thermal rise-time of a laser diode based on spectrally resolved waveforms

Thermal resistance and thermal rise-time are two basic parameters that affect most of the performances of a laser diode greatly. By measuring waveforms received after a spectroscope at wavelengths varied step-by-step, the spectrally resolved waveforms can be converted to calculate the thermal rise-time. Basic formulas for the spectrum variation of a laser diode and the measurement set-up by using a Boxcar are described in the paper. As an example, the thermal rise-time of a p-side up packaged short-pulse laser diode was measured by the method to be 390 μs. The method will be useful in characterizing diode lasers and LD modules in high-power applications.     

分离作用RFQ加速器物理特性的研究

RFQ加速器中加速效率随加速能量的增高而下降,为克服由此导致的RFQ能量局限而提出的分离作用RFQ加速结构,在仍保持采用射频四极场聚焦的同时,将加速与聚焦作用相分离. 综述了对它的加速效率、反场问题、腔体及束流特性研究 的结果,初步证实了其可行性及在较高能量区加速效率得到提高,并对正在研制的一台采用了这种分离作用RFQ的1.5MeV组合加速器做了介绍.     

碳纳米管锁模双包层光纤激光器的实验研究

本文采用双包层掺镱光纤作为增益介质,用单壁碳纳米管作为饱和吸收体,获得最高输出功率为336 mW的锁模脉冲激光.用飞秒激光诱导水击穿法直接在单模光纤上制备出D形区,通过在D形光纤上滴涂单壁碳纳米管溶液,成功制备出碳纳米管饱和吸收体,并对其饱和吸收特性进行测试,发现其调制深度为27％.利用该饱和吸收体作为锁模器件,制备出具有环形腔结构的锁模光纤激光器.当抽运功率为4W时,获得了脉宽为93.8 fs,中心波长为1083.8 nm,3 dB谱宽为8.6 nm,重复频率为5.59 MHz,平均功率为336 mW的飞秒脉冲激光输出.     

A general electron donor–acceptor complex for photoactivation of arenes via thianthrenation

General photoactivation of electron donor–acceptor (EDA) complexes between arylsulfonium salts and 1,4-diazabicyclo[2.2.2]octane with visible light or natural sunlight was discovered. This practical and efficient mode enables the production of aryl radicals under mild conditions, providing an unrealized opportunity for two-step para-selective C–H functionalization of complex arenes. The novel mode for generating aryl radicals via an EDA complex was well supported by UV-vis absorbance measurements, nuclear magnetic resonance titration experiments, and density functional theory (DFT) calculations. The method was applied to the regio- and stereo-selective arylation of various N-heterocycles under mild conditions, yielding an assembly of challengingly linked heteroaryl–(hetero)aryl products. Remarkably, the meaningful couplings of bioactive molecules with structurally complex drugs or agricultural pharmaceuticals were achieved to display favorable in vitro antitumor activities, which will be of great value in academia or industry.

General photoactivation of EDA complexes between arylsulfonium salts and 1,4-diazabicyclo[2.2.2]octane was discovered. This practical mode enables the generation of aryl radicals for C–H functionalization of arenes.     

Vanadium-Substituted Dawson-Type Polyoxometalate–TiO2 Nanowire Composite Film as Advanced Cathode Material for Bifunctional Electrochromic Energy-Storage Devices

Polyoxometalates (POMs) demonstrate potential for application in the development of integrated smart energy devices based on bifunctional electrochromic (EC) optical modulation and electrochemical energy storage. Herein, a nanocomposite thin film composed of a vanadium-substituted Dawson-type POM, i.e., K₇[P₂W₁₇VO₆₂]·18H₂O, and TiO₂ nanowires were constructed via the combination of hydrothermal and layer-by-layer self-assembly methods. Through scanning electron microscopy and energy-dispersive spectroscopy characterisations, it was found that the TiO₂ nanowire substrate acts as a skeleton to adsorb POM nanoparticles, thereby avoiding the aggregation or stacking of POM particles. The unique three-dimensional core−shell structures of these nanocomposites with high specific surface areas increases the number of active sites during the reaction process and shortens the ion diffusion pathway, thereby improving the electrochemical activities and electrical conductivities. Compared with pure POM thin films, the composite films showed improved EC properties with a significant optical contrast (38.32% at 580 nm), a short response time (1.65 and 1.64 s for colouring and bleaching, respectively), an excellent colouration efficiency (116.5 cm² C⁻¹), and satisfactory energy-storage properties (volumetric capacitance = 297.1 F cm⁻³ at 0.2 mA cm⁻²). Finally, a solid-state electrochromic energy-storage (EES) device was fabricated using the composite film as the cathode. After charging, the constructed device was able to light up a single light-emitting diode for 20 s. These results highlight the promising features of POM-based EES devices and demonstrate their potential for use in a wide range of applications, such as smart windows, military camouflage, sensors, and intelligent systems.